UK Bass Roller Track — 140 Bass-Weight Deconstruction
A 192-bar archetypal 140 BPM UK bass roller in the Bristol soundsystem-techno lineage: a tom groove that rolls instead of a half-step snare, a pressure sub with a mid layer that moves, dub space used as an event, grime-adjacent minimalism and 32-bar DJ ends, built element by element in Live 12 and then as a Session-view live set.
- Difficulty
- Intermediate
- Live edition
- Standard and up
- Max for Live
- Not needed
The blueprint is a 192-bar track at 140 BPM in G minor, 5 minutes 29 seconds, written as an archetype rather than a copy of any record. It sits where Bristol dubstep turned into what writers have called "Bristol bass techno" or "broken techno": the Punch Drunk / Livity Sound / Timedance / Hessle Audio orbit, with the dread and minimalism of the Bandulu side of the city. Elements: a short broken kick, three pitched toms that carry the groove, a rim backbeat on 2 and 4, a hat/shaker 16th bed, wood and hand-drum ghosts, a sine sub that holds long "pressure" notes, a mid layer whose filter moves on a 3/16 cycle, one sparse FM call, dub sends played as instruments and a quiet room-tone bed. Three decisions make it work: (1) the toms are the lead instrument — tuned to the key, grouped 3-3-3-3-2-2 so the groove rolls forward rather than landing on a half-time snare; (2) the bass is two layers with opposite jobs — the sub barely moves and supplies weight, the mid layer (150 Hz–2.5 kHz) never stops moving and supplies the "pressure" you feel on a system; (3) the arrangement is DJ-first: 32 bars of drums at each end, phrase changes every 16 bars, and one 16-bar dub "switch" in place of a breakdown and drop.
- Tempo
- 140 BPM, full-time feel: a bar is 1714 ms, a beat 429 ms, an 1/8 214 ms, an 1/16 107 ms, a dotted 1/8 (3/16) 321 ms, an 1/8 triplet 143 ms
- Key
- G minor; sub on G0 (49.0 Hz) with moves to F0 (43.7 Hz) and Bb0 (58.3 Hz); toms on D2 / G2 / Bb2 (147 / 196 / 233 Hz); kick body near D1 (73 Hz)
- Length
- 192 bars at 140 = 329 s ≈ 5:29; 16 bars = 27.4 s, 32 bars = 54.9 s
- Swing
- Kick, sub and rim straight; toms 54% (Groove Pool MPC 16 Swing-54 at 70% Amount); hats and shaker 58%
- Loudness
- −9 LUFS integrated, −8 short-term in the Pressure section, −1 dBTP ceiling; transients intact
- Mood
- Dry, physical, patient. Nothing happens for long stretches except the groove getting heavier.
Where the archetype comes from
This page invents a track, so most of what follows is the page’s own recipe. The style traits it is built on are a mix of documented statements and listening:
- Documented: Peverelist described Livity Sound as a label combining his influences from dub, jungle and techno (University Times, 2014), and has said he works without a plan and lost interest in dubstep once it became narrow (LOUD Bristol, 2021).
- Documented (critical reception): RA’s retrospective of Peverelist’s 2007 Punch Drunk single "Roll With The Punches" says its drums "stutter with a swing that became Ford’s signature" (RA Rewind, Andrew Ryce, 2019). The word "roller" on this page comes from that tradition of drums that keep moving.
- Documented: Batu calls Timedance "really physical soundsystem music", says a track must work on the floor with its basic elements before any sound design, and sees pushing plug-ins to near breaking point as the modern version of dub engineers’ experiments (Mixmag, Seb Wheeler, 2025). Earlier he said slower tempos left him more room for percussion and groove, and that he wants music that works in a club yet sounds alien (The Quietus, 2015).
- Documented (critical reception): a Resident Advisor description of Batu’s music, quoted by CTM Festival, lists "garden sprinkler clicks, bumpy toms, hand drums"; Mixmag summed up the early Timedance sound as "low-end, broken and forceful" (Mixmag, Patrick Hinton, 2016).
- Documented: Crack’s Hessle Audio cover story notes Pearson Sound’s "Work Them" and "Wad" briefly put woodblocks in the spotlight, and Pangaea says around five percent of detail can make or break a tune (Crack, Gabriel Szatan, 2022).
- Documented: Kahn & Neek describe heavy bassweight and murky sub as the dubstep elements they keep, and Kahn argues the music can live in that sound world without being a 140 banger (TRENCH, Son Raw, 2023).
- Documented: Hodge said in 2011 he started at around 140 and kept slowing down, and that producers were looking for space and revisiting jungle "with a fresh set of ears" (The Quietus, Sonic Router 023).
- By ear: the tom-led groove, the 3/16 movement in the mid bass, the dub throw on the rim and the long DJ ends are scene conventions heard across this lineage, not claims about how any named record was made. No named producer has documented the exact devices below.
Arrangement
Every section is a multiple of 16 bars, so a DJ counting phrases never gets caught. The intro is kick and low tom for 16 bars (27.4 s) — enough for a long blend — then the full tom roll and the rim. The sub arrives at bar 32 with no build: the "drop" is the sub turning up on the downbeat. Roll A adds wood and hand drums and the mid layer at bar 48. Pressure (64–96) is everything plus the FM call; nothing new is added in its second half — the mid layer’s filter range widens instead. The Switch (96–112) pulls the sub and mid out, halves the kick, and lets the call ride the Echo. Roll B brings the low end back at 112 with the mid layer’s LFO changed from 3/16 to 1/8T so the second half feels re-cut without a new sound. The outro removes things in the reverse order they arrived.
Energy curve
Page recipe. A roller is judged by whether it keeps a floor locked for five minutes, so energy is added in small steps — a new percussion lane, a wider filter range, the call — never with a riser. The Switch is the only release, and it is 27 seconds long, which is short enough that a DJ can leave it in or cut past it.
Transitions
Three bar-level moves carry all the transitions. Each grid is the last bar before the change and the first bar after it (32 steps of 107 ms).
Frequency layering
Page recipe. A roller has no snare to carve around, so the masking problem moves down an octave: the toms’ fundamentals (147–233 Hz) sit exactly where the mid layer’s lowest harmonics are. The solution is a dynamic dip — Multiband Dynamics on the mid layer, keyed from the tom bus, working only on 120–300 Hz — so the mid layer is full between tom hits and steps aside on them. The sub is a sine below 90 Hz that is never in that fight. Everything below 150 Hz is mono.
Element by element
The rolling tom groove (Drum Rack: three Drum Samplers tuned to the key)
Quick start
- Load
- Drum Rack, Drum Sampler, Auto Filter, Corpus
- Set
- Drum Sampler ×3 same short tom, transposed to D2, G2 and Bb2
- Pitch Env a few semitones over 25–40 ms on each
- Auto Filter LP 12 per pad, cutoff and resonance rising from low to high tom
- Corpus Membrane on the low tom only, tuned to D2, 15% wet
- Groove 3-3-3-3-2-2 accents per 16-step bar, MPC 16 Swing-54; straight 3s in bar 4
- You should hear
- Three bumpy toms in G minor rolling a dotted-8th pattern that corrects itself before the barline, except every fourth bar.
- Live edition
- Standard and up
Three toms — low on D2, mid on G2, high on Bb2 — are the lead instrument. They play a 3-3-3-3-2-2 accent grouping across each 16-step bar, which sounds like a dotted-8th roll that corrects itself before the barline; every fourth bar the correction is skipped and the 3-step cycle runs over the barline. This is design first and the thing the track is about.
- Drum Rack with three Drum Samplers loaded with the same short tom (any Core Library tom). Transpose each so its fundamental reads D2, G2 and Bb2 on Spectrum — the root, fifth-above-root and minor third of G minor across an octave.
- Use Drum Sampler’s Pitch Env playback effect on each: a few semitones down over 25–40 ms. That bump is what makes a tom sound "bumpy" rather than a pitched sine.
- An Auto Filter LP 12 per pad, cutoff and resonance rising from low to high tom. Documented (as technique): Attack’s rolling techno Beat Dissected alternates three similar toms on a 16th grid and gives each its own low-pass with different resonance; this page applies that idea at 140 and in key.
- Corpus Membrane on the low tom only, tuned to D2 at 15% wet, adds a skin ring that sustains the key under the groove.
- Program the grid below. Groove Pool MPC 16 Swing-54 on this clip only. Velocity: accents 110–127, others 70–90, ghosts 35–50.
- Bar 4 of every phrase: replace the 3-3-3-3-2-2 grouping with straight 3s (accents on steps 1, 4, 7, 10, 13, 16) so the roll runs into the next bar. Velocity → Random (MIDI) at ±8 on all toms.
Broken kick (Drum Sampler + Drum Buss Boom on D1)
Quick start
- Load
- Drum Sampler, Drum Buss, EQ Eight
- Set
- Drum Sampler round kick with little click, body near 73 Hz, Decay 180 ms
- Drum Buss Boom 30%, Freq with Force To Note on D1, Decay around 40%
- EQ Eight HP 35 Hz, bell -3 dB at 280 Hz
- Pattern 1, the "a" of 2, the "and" of 3, straight; velocity 127 on beat 1, 110 on the others
- You should hear
- A short, round broken kick on D1 that you hear as a separate note from the G0 sub.
- Live edition
- Standard and up
A short, round kick tuned to D1 (73 Hz) that plays a broken pattern — 1, the "a" of 2, the "and" of 3 — never four-to-the-floor and never just beat 1. It sits a fifth above the G0 sub so the two never share a fundamental.
- Pick a round kick with little click. Tune it so Spectrum shows the body near 73 Hz; Drum Sampler Decay 180 ms.
- Drum Buss Boom 30%, Freq with Force To Note on D1, Decay around 40%. Documented (as technique): Attack’s rolling-techno beat tunes Drum Buss Boom to the root note for the same reason (Attack). See Kick: Drum Buss transients for the device itself.
- Program the broken pattern below, straight (no swing). Velocity 127 on beat 1, 110 on the others.
- Group it with the toms for the drum bus but keep its own Utility Mono first.
Rim and clap backbeat on 2 and 4 (with a pre-delayed dub room)
Quick start
- Load
- Drum Sampler, EQ Eight, Saturator
- Set
- Rimshot Drum Sampler, Decay 90 ms, Transpose +1 st, on 2 and 4
- Clap Decay 160 ms, only on bar 2 beat 4
- EQ Eight HP 350 Hz, bell +2 dB at 2.5 kHz
- Saturator Analog Clip 3 dB
- Return A spring room, -14 dB send
- You should hear
- A dry full-time rimshot backbeat on 2 and 4, doubled by a clap every second bar, with a short dub room behind it.
- Live edition
- Standard and up
A dry rimshot on 2 and 4 is the techno-crossover tell: it gives a DJ a full-time backbeat to mix against. A clap doubles it only on the 4 of every second bar. It is the main thing sent to the dub returns.
Documented (as technique): Attack’s Pearson Sound-inspired Beat Dissected puts a delay on claps and rims so the repeats anticipate the next bar, but keeps fast 32nd fills dry because delay muddies them (Attack). This page follows both rules: the rim gets the dub return, the tom rolls never do. Attack’s syncopated 2-step Beat Dissected likewise builds its backbeat from layered rimshots rather than a snare, and places its kick skips by ear, off the grid; the roller borrows the rim backbeat and the idea of hand-placed skips (see the ghost rims above), at 140 instead of that piece’s 93 BPM.
Hat and shaker bed (16ths, 58% swing, Velocity Shaping)
Quick start
- Load
- Velocity, Drum Rack, EQ Eight, Auto Pan, Utility
- Set
- Velocity Random 12, Out Hi 110
- Drum Rack closed hat Decay 35 ms, open hat Decay 180 ms (choke)
- EQ Eight HP 7 kHz
- Auto Pan-Tremolo Auto Pan, 1/8T, 20%
- Utility Width 120%
- You should hear
- A quiet, swung 16th hat and shaker bed with a strong velocity contour, sitting 14 dB under the toms.
- Live edition
- Standard and up
A closed hat on 16ths with a strong velocity contour, an open hat on the offbeat 8ths in the Pressure section only, and a shaker loop underneath. This is the "techno" layer, kept quiet and swung harder than anything else.
Swing and choke technique are covered in Hi-hats: swing and groove and choke groups; nothing here differs except the levels — the hats sit 14 dB under the toms.
Wood and hand-drum ghosts (Collision woodblock, sampled hand drum, Erosion)
Quick start
- Load
- Collision, Drum Sampler, Erosion, EQ Eight
- Set
- Collision Mallet, Stiffness 70%, Resonator 1 Beam, Decay 25%, tuned D3
- Hand drum Drum Sampler one-shot, Decay 120 ms, Ran>Pan 30%
- Metal tick Drum Sampler, Decay 30 ms, Transpose +12 st
- Erosion Sine, 6 kHz, Amount 15
- EQ Eight HP 600 Hz
- You should hear
- Woodblock, hand-drum and metallic ticks filling the off-16ths the toms leave empty, from bar 48.
- Live edition
- Standard and up
A Collision woodblock, a hand drum one-shot and a metallic "sprinkler" tick fill the off-16ths that the toms leave empty. They arrive at bar 48 and are the 5% detail that makes the second half feel richer than the first.
Documented (critical reception): woodblocks (Crack on Pearson Sound) and sprinkler clicks plus hand drums (RA via CTM on Batu) are named in writing about this scene. The specific Collision patch is the page’s own; Collision itself is covered in Hi-hats and percussion: Collision mallets.
Pressure sub (Operator sine, G0, long notes, mono)
Quick start
- Load
- Operator, Saturator, EQ Eight, Compressor, Utility
- Set
- Operator Osc A sine only, 1 voice, Glide 40 ms
- Notes mostly G0, one F0, one Bb0 slide; each starts one 16th (107 ms) after a kick
- EQ Eight HP 25 Hz, low-pass at 110 Hz
- Compressor sidechain kick, 4 dB GR, attack 0.1 ms, release 90 ms
- Utility Mono; sub at −12 dBFS RMS with the kick off
- You should hear
- A pure G0 sine holding most of each bar, starting just after the kick, that is the weight and nothing else.
- Live edition
- Suite
A pure sine on G0 (49 Hz) that holds for most of each bar, starting on the 16th after the kick rather than with it. It changes note perhaps twice in 8 bars. On a system this is the weight; it does not need to do anything else.
- Operator, Osc A only, sine, mono voice. Write the root notes for 8 bars: mostly G0, one F0, one Bb0 slide.
- Start each note one 16th (107 ms) after a kick; the kick then needs only 4 dB of sidechain instead of 8. Documented (as technique): Attack’s 5 tips for synth basslines puts root notes on off-beats so the downbeats that do land feel stronger; the roller applies the same idea to a single held sub note.
- Low-pass at 110 Hz, Utility Mono. Level the sub so it reads −12 dBFS RMS on the meter with the kick off.
Sine sub design, kick tuning and sidechain choices are covered in Sub bass: Operator sine, tune to the kick and sidechain vs automation. The genre’s square-sub alternative is on the UK bass / 140 page; the roller uses a sine because the mid layer is already doing the harmonic work.
Mid movement layer (Wavetable + Roar + Auto Filter on a 3/16 cycle)
Quick start
- Load
- Wavetable, Roar, Auto Filter, EQ Eight, Multiband Dynamics
- Set
- Wavetable Osc 1 Basic Shapes saw-to-square, Osc 2 Harmonics an octave down at −8 dB, Mono, Glide 40 ms
- Roar Serial: Tube Preamp then Diode Clipper, Tone a little dark
- Auto Filter Band-pass, PRD, 650 Hz, resonance 30%, LFO 3/16 triangle at 25%
- EQ Eight HP 150 Hz (48 dB), LP 3 kHz
- Multiband Dynamics low band 120–300 Hz sidechained from the tom bus, about 4 dB
- You should hear
- The sub's notes an octave up in the mids, with a narrow band-pass breathing on a dotted-8th cycle, not a wobble.
- Live edition
- Suite
The "pressure" you feel in this style is mostly here: a layer from 150 Hz to 2.5 kHz that plays the same long notes as the sub an octave up, and whose band-pass filter opens and closes on a dotted-8th (321 ms) cycle — a rate that rolls against the 16th grid the same way the toms do. It is not a wobble: the movement is narrow and constant, like a speaker breathing.
- Wavetable, Osc 1 a saw-to-square table in Basic Shapes, Osc 2 a Harmonics table an octave down at −8 dB. Mono, Glide 40 ms, Unison off — width comes later, above 150 Hz.
- Copy the sub’s MIDI and transpose it up 12 st (G1 = 98 Hz). The layer’s own fundamental is then cut by the 150 Hz high-pass: only harmonics 2 and up (196 Hz and above) remain, so it moves in the mids without fighting the sub.
- Roar in Serial routing: Tube Preamp for warmth, then Diode Clipper for edge. Tone a little dark. This is where the layer gets the density to be heard on a system.
- Auto Filter Band-pass with the PRD circuit at 650 Hz, resonance 30%, LFO synced to 3/16 with a triangle shape at 25% amount. Automate the LFO amount from 15% at bar 48 to 40% at bar 80: that is the "nothing new, just heavier" move in Pressure.
- Multiband Dynamics with the low band (120–300 Hz) sidechained from the tom bus, downward compression about 4 dB, so the toms punch through on every accent.
- Utility Bass Mono at 150 Hz.
Documented (as technique): Attack’s Blawan-inspired Wavetable bass drives the PRD filter hard and lets cutoff follow note and velocity, then uses Erosion and Drum Buss for grit (Attack). This layer borrows the PRD drive idea but keeps the movement on a tempo-synced cycle. Attack’s Low-End Theory: modulated bass describes the wider principle — sparse notes, with "the modulation of the synth providing the interest" — and notes that the full dubstep wobble can now sound clichéd, which is why the movement here stays narrow. For other ways to build a mid layer see Bass music mid-bass; for wobble-style movement, which this is not, see Wobble and growl bass.
The FM call (Operator bell-pluck, two notes per 8 bars)
Quick start
- Load
- Operator, EQ Eight, Saturator
- Set
- Operator Algorithm B→A, Osc B ratio 3.5 at -12 dB, Osc A sine
- Amp envelope D 220 ms, S 0
- EQ Eight HP 500 Hz, LP 5 kHz
- Saturator Analog Clip 2 dB
- Notes one or two per 8 bars, off the beat
- You should hear
- A short, cold FM pluck playing one or two notes every 8 bars, like a grime riff with most notes removed.
- Live edition
- Suite
The only melodic element: a short, cold FM pluck that plays one or two notes per 8 bars, like a grime riff with almost all of its notes removed. It is the element that gets thrown into the dub delay in the Switch.
The grime square lead and the stab with dub throw are taught on Grime track and UK bass / 140: stab; the call here is deliberately less than either: one note is a riff if it repeats in the same place for 32 bars.
Dub sends as instruments (spring room, Echo throw, Spectral Time hold)
Quick start
- Load
- Hybrid Reverb, Echo, Spectral Time
- Set
- Return A: Hybrid Reverb Convolution spring IR, Pre-delay 35 ms, Decay 0.9 s, Low cut 300 Hz; rim send −14 dB
- Return B: Echo Ping Pong, L 3/16, R 1/4, Feedback 65%, Ducking on
- Throw rim send to Return B at 0 dB for one hit at the end of each 16-bar phrase
- Return C: Spectral Time Freeze on the final beat of bar 111, Dry/Wet 30%
- You should hear
- A short spring room just after each rim hit, echo throws rising in the gaps at phrase edges, and a frozen call note.
- Live edition
- Suite
Three returns. A short spring room is always on for the rim and wood (−14 dB send). An Echo throw is touched only at phrase edges and through the Switch. A Spectral Time freeze holds the last call note of the Switch under the return of the low end.
- Return A as above; set its send on the rim at −14 dB and on the wood/hand group at −18 dB. The pre-delay keeps the hit dry and puts the room just after it.
- Return B, Echo: Ping Pong with left at 3/16 and right at 1/4, feedback 65%, Ducking on so repeats rise in the gaps. Noise and Wobble lightly on for tape character.
- Automate the rim send to Return B to 0 dB for one hit on the last beat of each 16-bar phrase. Through the Switch, send the call at 0 dB and ride feedback between 60 and 85% by hand.
- Return C: arm Spectral Time Freeze on the final beat of bar 111 and fade it out across bars 112–116.
Documented: Batu ties Timedance to dub and sound-system history (Mixmag, 2025), and Pinch produces in Logic but uses Ableton for live dubbing sets (Stamp The Wax, 2020). The full dub-send toolkit — tape echo, springs, sirens, feedback runaways — is on Dub FX and delays and the Dub delay send rack; this page uses only three moves from it.
Room-tone bed (Wavetable noise through Auto Filter, −36 dB)
Quick start
- Load
- Wavetable, Auto Filter, Vinyl Distortion, EQ Eight, Utility
- Set
- Wavetable Noise table, held note, Unison off
- Auto Filter Band-pass 12, 2 kHz, Res 10%, LFO 0.05 Hz 20%
- Vinyl Distortion Crackle Volume low, Density low
- EQ Eight HP 1 kHz, LP 12 kHz
- Utility Width 150%, Gain -36 dB
- You should hear
- A barely audible filtered noise that makes the dry drums sound like they are in a room without any reverb.
- Live edition
- Suite
A barely audible filtered noise from bar 1 to bar 192. It makes the dry drums sound like they are in a room without putting reverb on them, and it glues the silence in the Switch.
This is the same trick as the noise bed on UK bass / 140: dub space, set quieter. Mute it and the track sounds like a loop; leave it in and nobody notices it.
Mix decisions
The mix is aimed at a club or sound system first and headphones second. See Sound-system mixing for the general method; the decisions specific to this track are below.
Sidechain map
| Source | Destination | Device | Amount | Why |
|---|---|---|---|---|
| Kick | Sub | Compressor, ext. sidechain | 4 dB, release 90 ms | The sub already starts a 16th late; it only needs a short duck |
| Kick | Mid layer | Compressor, ext. sidechain | 2 dB, release 60 ms | Kick knock at 150–300 Hz stays clear |
| Tom bus | Mid layer | Multiband Dynamics, low band 120–300 Hz | 4 dB on tom accents | The toms lead in the zone they share with the bass |
| Rim | Echo return | Echo Ducking | On, fast release | Repeats bloom in the gaps, not on the backbeat |
| Kick | Room bed | Compressor, ext. sidechain | 3 dB | The bed breathes with the kick, which sounds like a real room |
Gain staging (pre-master)
| Element | Level | Meter |
|---|---|---|
| Kick | −6 dBFS | peak |
| Sub | −12 dBFS | RMS, kick muted |
| Tom bus | −8 dBFS | peak on accents |
| Rim | −10 dBFS | peak |
| Mid layer | −16 dBFS | RMS |
| Hats / shaker | −22 dBFS | peak |
| Wood / hand | −18 dBFS | peak |
| Call | −14 dBFS | peak |
| Main before Limiter | −4 to −3 dBFS | peak; leaves 2–3 dB for the Limiter to reach −9 LUFS |
EQ carving
Bus structure
Width per element
| Element | Width | How |
|---|---|---|
| Kick, sub, rim | Mono | Utility Mono |
| Toms | Mono below 150 Hz; low tom centre, mid 15 L, high 15 R | Drum Rack chain pan |
| Mid layer | Mono below 150 Hz, 100% above | Utility Bass Mono 150 Hz |
| Hats, shaker, tick | 120–140% | Utility Width; 1/8T auto-pan |
| Call | 60% | Utility Width; the Echo provides the spread |
| Returns | Full | Echo Ping Pong; Hybrid Reverb stereo |
Build it yourself in 10 steps
- Set 140 BPM, G minor. Build the three-tom Drum Rack (D2 / G2 / Bb2, Pitch Env bumps, per-pad LP filters) and program the 3-3-3-3-2-2 roll. Loop it for a minute; if it does not move you alone, nothing later will fix it.
- Add the broken kick tuned to D1 with Drum Buss Boom on D1. Straight, never on 2, 3 or 4.
- Rim on 2 and 4, clap on the 4 of every second bar, ghost rims at velocity 40.
- Hats and shaker on 16ths at 58% swing, 14 dB under the toms; 1/8T auto-pan.
- Operator sine sub on G0, notes starting a 16th after the kick, LP 110 Hz, Mono, kick sidechain 4 dB.
- Wavetable mid layer on the same notes +12 st, Roar Serial, Auto Filter band-pass PRD with a 3/16 LFO, HP 150 Hz, Bass Mono 150 Hz, Multiband Dynamics keyed from the tom bus.
- Collision woodblock on a 6-step cycle, hand drum ghosts and a metal tick; enter at bar 48.
- The FM call: two notes in 8 bars, thrown into Echo. Set up the spring room, Echo and Spectral Time returns.
- Arrange 192 bars: 32 intro, 32 Roll A, 32 Pressure, 16 Switch, 48 Roll B (LFO to 1/8T), 32 outro. Throws on the last bar of each phrase; widen the mid layer’s LFO amount through Pressure.
- Main: EQ Eight, Glue 2:1, Limiter −1 dB ceiling, around −9 LUFS integrated. Play it after a different 140 track and before a 130 techno track; if both blends feel natural, the ends are right.
Variations
| Variation | What changes |
|---|---|
| Bandulu-style dread 140 | Strip the hats and wood entirely, replace the toms with one low tom and a rim, make the sub the lead with more note movement, and leave an 8-bar hole for an MC. The dub returns do more; the call becomes a single siren-like Operator note. See Grime track for MC-ready structure. |
| Techno-leaning 132–135 | Kick moves towards four-to-the-floor with one beat dropped per bar, toms on straight 16ths with the filter trick from the Attack rolling-techno beat, sub replaced by a Drum Buss Boom tail. See Deep techno. |
| Off-kilter / Timedance-leaning | Push the wood/tick lane into a 5- or 7-step cycle, resample the toms through Roar Feedback mode and re-slice, and let one percussion lane sit off the grid by 10–20 ms. Keep the sub and kick exactly as here so the floor still locks. |
| Jungle switch | For the Switch only, play a chopped break at the same 140 (or flip the project to 160 for Roll B). The toms carry over as a tuned layer under the break. See Jungle and breakbeat. |
| Deep dubstep return | Move the rim to beat 3 only and halve the tom density; the track becomes half-step and joins the Deep dubstep family. Drums for that are on Deep dubstep drums. |
Live performance version
A roller suits live playing because its parts are loops that change by addition and subtraction. The set keeps every lane as a Session clip, plays the toms and the call from Push, and puts all the "dub" on macros. Hardware is optional: a drum machine with tunable toms can replace the tom Drum Rack.
Scenes
| Scene | Blueprint bars | Playing | Manual move |
|---|---|---|---|
| 1 DJ intro | 0–16 | Kick, low tom, room bed | Tom Tone macro low |
| 2 Roll | 16–32 | + full toms, rim, hats (HP) | Hat HP macro down over 16 bars |
| 3 Roll A | 32–64 | + sub at 32; wood and mid layer at 48 | Play tom fills on pads |
| 4 Pressure | 64–96 | + call, open hat | Mid Move macro up across 32 bars |
| 5 Switch | 96–112 | Half kick, rim, call into Echo | Throw and Feedback macros by hand; Freeze on the last beat |
| 6 Roll B | 112–160 | Everything, mid LFO at 1/8T | Tom Bump macro for accents |
| 7 DJ outro | 160–192 | Kick, toms, hats thinning | Into the next track |
Performance rack
Push mapping
- Pads, toms: Drum Rack 16-pad layout with the three toms plus four transposed copies (F2, C3, D3, G3) so fills can climb in key. Note Repeat at 1/16 and 1/16T for rolls; record over the clip with Overdub, quantize at 50%.
- Pads, call: Scale mode, G minor, In Key. One note at a time.
- Encoders: the eight macros above in order; Throw and Feedback are the two most used.
- Scene launch: Global Quantization 4 bars; the Switch scene launched at bar-boundary 1 bar early so its first bar is the kick drop.
Hardware integration
- Tune the drum machine’s toms to D2, G2 and Bb2 with Spectrum on the input; most machines drift, so check after warm-up.
- An External Audio Effect on Return B lets a hardware tape echo or delay pedal replace Echo; Ducking is then done with a Compressor sidechained from the rim before it.
- Limiter on every hardware return: high Echo feedback on a pedal can self-oscillate into the sub range.
Related
- UK bass / 140, Dubstep, Deep dubstep, Grime, Deep techno, Dub and reggae, Jungle and breakbeat
- Famous bass music tracks — the real records of this lineage, analysed; Dubstep track, Halftime track, Grime track — the neighbouring blueprints this one avoids repeating
- Bass music mid-bass, Deep dubstep drums, Sub bass, Kick, Hi-hats and percussion, Dub FX and delays, Textures, foley and noise
- Dub delay send rack, Drum bus rack, Sub bass rack, Performance rack
- Sound-system mixing, Multiband sidechain, Mid/side and stereo, Delay design, Reverb and space, Performance and live
- Sampler, Simpler and Drum Sampler, Wavetable, Roar and saturation, MIDI tools
- BPM to ms, Note to Hz