Downtempo Track — Chillout Groove, Live Keys & Warm Low End Deconstruction
A 144-bar archetypal downtempo / chillout track at 96 BPM in A Dorian, in the Bonobo / Nightmares on Wax / Thievery Corporation lineage: hand-played swung drums, a split electric bass, Rhodes and a generative Rhodes bed, arranged strings and a flute line, call-and-response vocal chops, organic percussion and a six-minute arc with no drop. Built element by element in Live 12, then rebuilt as a band-parts live set.
- Difficulty
- Intermediate
- Live edition
- Suite
- Max for Live
- Not needed
The blueprint is a 144-bar track at 96 BPM in A Dorian, exactly 6 minutes long. It is written as an archetype, not a copy of any record, and it sits in the warm, melodic branch of downtempo — the Bonobo / Nightmares on Wax / Thievery Corporation line, where Rhodes, strings, woodwinds and live-feeling drums meet sampling. The darker, dustier Bristol sound is a different job and has its own page (trip-hop track); nothing here is crushed, nothing is noir, and the minor key is Dorian, so the IV chord is major and the tune leans towards light. Elements: a hand-played drum kit, hats with a randomised sample start, a percussion rack (congas, shaker, tambourine), a split electric bass (clean mono sub, effected upper layer), a Rhodes playing the changes, a generative Rhodes bed built from Follow Actions, an arranged string section, a flute counter-melody, a nylon-guitar comp, a kalimba ornament, call-and-response vocal chops, a found-sound texture with a time-stretched drone, and a pitched reverb return. Three decisions make it work: (1) the timing comes from hands, not a grid — drums are played in or nudged by hand, and the only Groove Pool groove is a light one on the percussion, so the kit and the band lean against each other like players; (2) the low end is two signals with two jobs — a mono sine under 120 Hz that never changes, and a bass guitar above it that is allowed to growl, slide and carry effects; (3) the arrangement is one long rise and a long fall, built by adding a player every 8 or 16 bars and taking them away in the outro, with a single interlude where the drums leave and the strings carry the track. There is no drop, no riser and no impact anywhere in it.
- Tempo
- 96 BPM: a bar is 2500 ms, a beat 625 ms, an 1/8 312.5 ms, an 1/16 156.25 ms, a 1/32 78 ms, a dotted 1/8 (3/16) 469 ms, a dotted 1/4 938 ms, an 1/8 triplet 208 ms, an 1/16 triplet 104 ms; 2 bars = 5.0 s
- Key
- A Dorian (A B C D E F# G). Main vamp Am9 → D9 (i → IV, the Dorian major IV); B section Cmaj7 → Bm7 → Em9 → D/F#. Sub on A0 (55.0 Hz) with moves to D1 (73.4 Hz), G0 (49.0 Hz), E0 (41.2 Hz) and C1 (65.4 Hz) — Live names, C3 = middle C
- Length
- 144 bars at 96 = 360 s = 6:00; 8 bars = 20 s, 16 bars = 40 s, 24 bars = 60 s
- Swing
- Drums hand-played or hand-nudged, no groove; percussion on the Groove Pool’s MPC 16 Swing-58 at 60% Timing — at 96 BPM a 58% swing puts every off-16th about 25 ms late (181 ms instead of 156 ms after the 8th)
- Loudness
- About −11 LUFS integrated, −9 short-term at the peak section, true peak −1 dBTP. Downtempo keeps its dynamics; the interlude should be clearly quieter than the peak
- Mood
- Warm, unhurried, late afternoon going on sunset. A band in a room, with a sampler on the desk.
Where the archetype comes from
This page uses Documented only for claims a source makes, and By ear for listening analysis and scene knowledge. Everything in the element recipes is this page’s own recipe unless a source is named next to it. Record-by-record analysis belongs to Famous Downtempo Tracks; this page only uses those artists’ documented methods as technique.
- Documented: Wikipedia’s downtempo article describes the style as atmospheric electronic music with slower beats than dance music, close to ambient but with more weight on rhythm, often around 90 BPM, played in club chill-out rooms and as warm-up or cool-down music. It names Nightmares on Wax as an early pioneer, Thievery Corporation and Kruder & Dorfmeister among the 1990s acts, Bonobo among the prominent ones, and says a more melodic, instrumental blend of acoustic and electronic sounds took the downtempo name in the late 1990s.
- Documented: Nightmares on Wax is George Evelyn of Leeds, on Warp; Smokers Delight came out in 1995 and Carboot Soul in 1999 (Wikipedia). Electronic Sound reports that he made Smokers Delight mostly at home on an Atari ST and an Akai S950, brought in musicians when he needed them, spent the last five days at Touchwood Studios in Leeds recording percussion and extra keys, and mixed jazz, hip-hop, reggae and early-90s rave while rejecting the trip-hop label (Electronic Sound). Coming off that record, he wanted Carboot Soul to be song-based rather than a concept album (Goodhood).
- Documented: Thievery Corporation (Rob Garza and Eric Hilton) formed in 1995 at the Eighteenth Street Lounge in Washington, D.C., started the ESL label in 1996, and blend dub, acid jazz, reggae, Indian and Middle Eastern music, hip-hop and Brazilian music including bossa nova; their touring line-up includes drums, sitar and guitar, percussion and bass (Wikipedia).
- Documented: Bonobo is Simon Green; his debut Animal Magic came out on Tru Thoughts in 2000, later albums on Ninja Tune, and from the 2010 Black Sands tour he played with a full band including keys, guitar, saxophone, strings and drums (Wikipedia). He told Ableton that his first two albums were made on Akai samplers with 32 seconds of memory and eight-voice polyphony, that he programs MIDI by hand rather than using quantise or the Groove Pool, that he likes re-pitching acoustic instruments beyond their natural range, sometimes starts ideas on a Fender Rhodes, and that “I just build up layers and layers and layers” before removing the element they had in common (Ableton, Path to Migration).
- Documented: In XLR8R’s artist tips, Bonobo describes a random LFO on Sampler’s sample start for moving hi-hats, two channels of chopped Rhodes clips looping every five and every three bars with Follow Actions picking the next clip (the basis of the Migration title track), a time-stretched section of the track used as a low drone bed, a reverb return driven, re-pitched and compressed, phone field recordings layered into a sampler patch, vocal syllables chopped and stacked as call and response, and splitting a bass with an Audio From channel so the sub stays mono and clean while the upper range takes effects (XLR8R).
- Documented: Bandcamp Daily reports that most of Migration began on a laptop in Ableton on headphones, that strings were added only once a track had become a contender, and that later Bonobo albums are more often orchestrated for human players (Bandcamp Daily, 2017).
- Documented (as technique): Attack’s chillout Beat Dissected gives 90–110 BPM, 50–60% swing and mostly organic drum samples, a snare-and-clap layer on 2 and 4 nudged by hand, closed hats with choked open hats, and a light conga-and-tom part (Attack, republished by Loopmasters); its raw chillout beat layers three kick samples and puts the snare in a hall reverb (Attack).
- By ear: the Dorian i–IV vamp, the long add-a-player arc, the strings-only interlude, the warm (not dusty) drum tone and the 90–105 BPM pocket are conventions heard across this lineage. They are not claims about how any named record was made, and no gear, BPM or key of a real record is asserted here.
Arrangement
At 96 BPM a 16-bar section is 40 seconds, so the track can afford to wait. The intro (0–16) is a found-sound bed (a room and a street, see the texture element), the stretched drone very low, and the Rhodes playing the Am9 → D9 vamp alone; the shaker arrives at bar 8 with the first entry of the generative Rhodes bed. Groove A (16–32) brings in the drums softly — eight bars with the kit low-passed and the snare played as a brush-like ghost pattern — then the full kit at 24 with the bass. A2 (32–48) adds the congas, the nylon guitar and the vocal chops. B (48–64) moves the harmony to Cmaj7 → Bm7 → Em9 → D/F#, the strings enter as an arranged section and the flute answers them from bar 56. The interlude (64–80) removes kit, bass and guitar; the strings take the melody, the kalimba and the Rhodes bed hold the time, and the room comes back. The rebuild (80–96) returns the hats first, a hand-played fill at 84, the kick and snare at 88 and the bass with them. The peak (96–120) is the only 24-bar section and the only place everything plays. The outro (120–144) takes players away one at a time — guitar, bass, kick and snare, hats — until the congas, a last vocal call, the room and a thinned Rhodes are left.
Transitions
| Bar | Move | How, in Live |
|---|---|---|
| 16 | Drums arrive under a closing low-pass | Drum group Auto Filter LP from 800 Hz to fully open across bars 16–24 (clip envelope or arrangement automation) |
| 24 | Bass enters on the one, kit opens | The bass starts on beat 1 with a slide up from G0; no fill — the change is the bass |
| 47–48 | Into the B section | One drum fill played by hand; the pitched reverb return catches the last vocal chop and swells over the bar line |
| 64 | Interlude: the band stops | Kit, bass and guitar end on the downbeat of bar 64 with their natural tails; the string swell that started at bar 63 carries the ear across |
| 84–88 | The kit plays back in | Hats from 80, a four-bar tom-and-snare fill from 84, kick and bass on 88 |
| 120–144 | Players leave | Mute in order: guitar 120, bass 132, kick and snare 136, hats 140 — every exit on a phrase line, nothing faded except the room |
Frequency layering
The low end is simple on purpose: a sine sub and a soft kick, ducked lightly, and nothing else below 120 Hz. The difficulty is in the middle, where five melodic players share two octaves. The page solves it with three rules. Register: the Rhodes plays from A1 up to around E3, the guitar sits above it, the strings sit above both, the flute is the highest melodic voice. Turns: the guitar and the vocal chops never play their busy figures in the same bar as the flute; the kalimba only plays when the guitar is out. Air, not cuts: high-pass everything except the sub and kick, then use gentle 1–2 dB bells; deep notches make a band sound like samples.
Element by element
The hand-played kit: kick, snare and rim (Drum Rack, played in, no quantise)
Quick start
- Load
- Drum Rack, Drum Sampler, Simpler, Drum Buss, Glue Compressor
- Set
- Kick: Drum Sampler soft, round acoustic kick, Decay 260 ms
- Recording two bars played in, Record Quantization None; fix only hits more than about 20 ms off
- Snare and clap on 2 and 4, clap 9 dB under; Track Delay pushes the snare 10–15 ms late
- Drum Buss Drive 8%, Crunch off, Boom off, Transients +10
- Glue Compressor 2:1, attack 10 ms, release auto, 1–2 dB
- You should hear
- A warm kit that sounds like a drummer playing quietly, pushing and pulling against the grid instead of locked to it.
- Live edition
- Standard and up
A warm kit that sounds like a drummer playing quietly: a soft, round kick, a snare layered with a clap on 2 and 4, a rim click for the interlude-adjacent sections, and ghost notes. The point is the timing — it is played on pads or keys and corrected only where it is wrong, never quantised to the grid.
- Drum Rack with Drum Sampler on kick, snare, rim and toms; a Simpler on the clap. Choose a kick that is round rather than clicky — at 96 BPM the beat is 625 ms long, so a 260 ms decay leaves more than half the beat clear for the bass.
- Turn the clip grid off and play two bars in with a pad controller or keys, metronome on, with Record Quantization set to None. Keep the take that feels best, then fix only the hits that are more than about 20 ms off where you meant them. Documented (as method): Bonobo programs drums by hand rather than quantising (Ableton).
- Snare and clap on 2 and 4, with the clap 9 dB under the snare and its sample start trimmed so it lands a few ms after; push the whole snare slightly late — 10–15 ms — with the track’s Track Delay rather than by moving notes. Documented (as technique): Attack’s chillout beat layers snare and clap on 2 and 4 and nudges hits for a looser feel (Attack).
- Ghost snares at velocity 25–40 before beat 3 and on the last 16th of the bar; one kick pickup on the and-of-2 in the second bar.
- Rim click replaces the snare in bars 16–24 and in the rebuild (80–88) so the kit can arrive gradually.
- Group processing: Drum Buss Drive 8%, Crunch off, Boom off (the sub owns the low end), Transients +10; then Glue Compressor 2:1, attack 10 ms, release auto, 1–2 dB of reduction. Warm, not crushed.
Hats and ride with a moving sample start (Sampler + random LFO)
Quick start
- Load
- Velocity, Sampler, EQ Eight
- Set
- Velocity Random 12, Out Low 30
- Sampler closed hat; LFO 1 S&H about 6 Hz → Sample Start, 5–10%
- Playing 16ths accented on the 8ths, every fourth 16th soft
- Open hat once per bar on the and-of-4, choke group
- EQ Eight HP 4 kHz, LP 13 kHz
- You should hear
- Warm 16th hats where every hit starts at a slightly different point of the sample, so no two sound the same.
- Live edition
- Suite
The hats are 16ths with strong velocity shape and one open hat per bar, but every hit starts at a slightly different point of the sample, so no two sound the same. A ride cymbal replaces the closed hat in the peak section.
- Load a closed hat into Sampler. On the Modulation tab, set LFO 1 to S&H at about 6 Hz (unsynced) and route it to Sample Start with a small amount, around 5–10%. Documented: Bonobo puts a random LFO on Sampler’s sample start for movement on hi-hats (XLR8R).
- Play 16ths with the accent on the 8ths; leave every fourth 16th soft. The Velocity device adds a little randomness on top, Out Low 30 so nothing disappears.
- Open hat on a second pad in the same Drum Rack with a choke group, once per bar on the and-of-4; the next closed hat cuts it off.
- For the peak (96–120), duplicate the chain with a ride cymbal sample and play quarter notes plus the and-of-2 and the and-of-4 — jazz time at a slow tempo.
- Keep the hats low-passed at 13 kHz. This lineage is warm; the air comes from the strings and the room, not from the hats.
Organic percussion: congas, bongos, shaker, tambourine (Drum Rack + Groove Pool)
Quick start
- Load
- Drum Rack, Drum Sampler, Collision, Simpler
- Set
- Drum Rack congas in Drum Sampler, bongos from Collision Membrane, shaker and tambourine in Simpler
- Groove extracted from your played drum clip, or MPC 16 Swing-58
- Groove Pool Timing 60%, Random 4%, Velocity 30%, Quantize 0%
- Shaker 16ths with velocity rising into beat 3; tambourine on 2 and 4 in the peak only
- You should hear
- Warm, acoustic hand percussion that follows your drummer’s feel, telling the ear the track is organic.
- Live edition
- Standard and up
The percussion is the only part on a groove template. Congas play a simple tumbao-like figure in two bars, bongos answer once per phrase, a shaker plays 16ths and a tambourine hits 2 and 4 in the peak. It is the layer that tells the ear the track is warm and acoustic.
- Drum Rack with recorded congas (open low, slap and muted high) in Drum Sampler; bongos from Collision with the Membrane resonator; shaker and tambourine in Simpler.
- Extract the groove from your played drum clip (right-click the clip → Extract Groove), so the percussion follows your drummer. If you have no take you like, use MPC 16 Swing-58.
- In the Groove Pool, set Timing 60%, Random 4%, Velocity 30%, Quantize 0%. Commit the groove once the part is finished.
- Program the congas below, then play two or three variations by hand for bars 4, 8 and 16 of each phrase.
- Shaker 16ths with velocity rising into beat 3 (Velocity Shaper on the clip or drawn by hand); tambourine on 2 and 4 in the peak only.
Warm electric bass, split: clean mono sub + effected upper layer (Audio From routing)
Quick start
- Load
- Tension, EQ Eight, Utility, Amp, Cabinet
- Set
- Tension Plectrum, Body Guitar, large Size, Damping 60%; source track output to Sends Only
- Sub track Audio From the source, EQ Eight LP 120 Hz 48 dB/oct, Utility Mono
- Upper track Audio From the source, EQ Eight HP 120 Hz 48 dB/oct
- Amp Bass, Gain 3, Bass 6; Cabinet 1x15 Bass, Dynamic, Near On-Axis
- Sub sidechain Compressor from the kick, 2–3 dB, release 120 ms
- You should hear
- A Dorian bass line whose sub stays clean, dry and mono while the upper range growls and moves the groove.
- Live edition
- Suite
The bass is a bass guitar — recorded DI if you play, or Tension’s plectrum model if you do not — playing a Dorian line with slides and rests. Its signal is split into two tracks: one keeps only the sub under 120 Hz and stays dry and mono; the other high-passes the same signal and takes the amp, drive and a touch of delay.
- Record the bass DI (see DI recording) or play Tension: Excitator Plectrum, Body type Guitar with the size raised, String decay medium, Damper on for a muted-thumb tone. Play monophonically with legato slides between notes a step apart.
- Set the source track’s output to Sends Only so it is not heard directly. Create two audio tracks with Audio From set to the source track. Documented: Bonobo splits bass this way so the sub stays clean and mono while effects go on the upper range (XLR8R).
- Sub track: EQ Eight low-pass at 120 Hz, 48 dB/oct; Utility Mono. If the bass guitar’s low end is uneven, replace this track with an Operator sine playing the same MIDI an octave down (the sub/mid split rack).
- Upper track: high-pass at 120 Hz, 48 dB/oct, then Amp (Bass model) and Cabinet for growl, a little Saturator Analog Clip, and 8% of the dub-delay send on the slides only.
- Compress the sub track lightly from the kick: Compressor with external sidechain, 2–3 dB, release 120 ms. The upper track is not ducked — its movement is the groove.
Rhodes on the changes (Electric, Strum, Auto Pan-Tremolo)
Quick start
- Load
- Electric, Chorus-Ensemble, EQ Eight, Compressor
- Set
- Electric Mallet Stiffness 45%, Force 55%, Pickup R, Symmetry 55%, Distance 45%
- Voicings Am9 as A1–G2–B2–C3–E3, D9 as D2–F#2–C3–E3
- Strum transformation about 25 ms upward on the chords
- Auto Pan-Tremolo Auto Pan, 1/2 dotted, 30%; Chorus-Ensemble Chorus, 0.3 Hz, 15%
- EQ and Compressor HP 150 Hz, bell −2 dB 350 Hz; 3:1, 3 dB
- You should hear
- A Rhodes rocking between two chords like one hand, rolled like fingers, barking on accents with a slow stereo sway.
- Live edition
- Standard and up
The harmonic centre: a Rhodes-style Electric playing the Am9 → D9 vamp and the B-section changes as a player would — voicings that move by step, chords rolled by a few milliseconds, a slow stereo tremolo. Unlike the trip-hop Rhodes, it is bright enough to bark on accents and is not drowned in delay.
- Electric: start from a clean Rhodes-type preset. Mallet Stiffness around 45% and Force around 55%; Pickup type R; push Symmetry slightly off centre and bring Distance in for more bark on hard hits. The full parameter tour is on Electric: Rhodes-style tine piano.
- Voicings (Live names): Am9 as A1–G2–B2–C3–E3, D9 as D2–F#2–C3–E3. The top voice moves E3 → E3 and the inner voices by a step, so the vamp sounds like one hand rocking.
- Play the part, then use the Strum transformation at about 25 ms upward on the chords so they roll like fingers. The humanisation family (Strum, Time Warp, Ornament) is on humanising keys.
- Auto Pan-Tremolo in Auto Pan mode at a dotted half bar, 30% — a slow suitcase-style stereo movement that never syncs with the 1/8 hats.
- B section: Cmaj7 (C2–B2–E3–G3), Bm7 (B1–A2–D3–F#3), Em9 (E2–D3–F#3–G3), D/F# (F#1–D2–A2–D3), two beats each, so the harmonic rhythm doubles for the lift.
The generative Rhodes bed: chopped clips on 5- and 3-bar Follow Actions
Quick start
- Load
- Simpler, Electric, EQ Eight, Echo, Utility
- Set
- Clips single A Dorian notes and dyads from Electric, one bar long, bounced to audio
- Track 1 six clips padded to 5 bars, Follow Action A Other, chance 1, time 5 bars
- Track 2 five clips padded to 3 bars, Follow Action time 3 bars
- Bed group EQ Eight HP 400 Hz, LP 6 kHz; Echo 3/16, feedback 35%, Wobble 15%, 12% wet
- Utility Gain −14 dB, Width 120%
- You should hear
- A quiet Rhodes bed that never repeats the same way, the two tracks lining up only every 15 bars.
- Live edition
- Suite
Under the played Rhodes is a quieter bed that never repeats in the same way: two tracks of short Rhodes clips, one note or dyad each, chosen at random by Follow Actions. One track changes every five bars, the other every three, so the pair only lines up every 15 bars — 37.5 seconds at 96 BPM.
- Record or render the Electric playing single notes and dyads from A Dorian — A, C, E, G, B, F#, plus dyads like E–A and F#–B — each one bar long with its natural decay. Bounce them to audio.
- Track 1: six of these clips padded to five bars; Track 2: five clips padded to three bars. In each clip’s Follow Action section, set Action A to Other, chance 1, and the Follow Action Time to 5 bars (Track 1) or 3 bars (Track 2). Ableton documents Follow Actions in the Launching Clips chapter of the manual.
- Launch one clip on each track and let them run for five minutes, recording the result (resampling track or Session record into Arrangement). Do it three times and keep the best sections.
- Place the bed under the intro (8–16), the B section and the interlude (48–80), and part of the peak (96–120) at −14 dB, high-passed at 400 Hz so it never touches the bass or the played Rhodes’ left hand.
Arranged strings: section parts, not a pad (Sampler or Wavetable ensemble)
Quick start
- Load
- Sampler, EQ Eight, Compressor, Hybrid Reverb
- Set
- Sampler sustained strings, CC1 → volume and filter, one track per line
- Lines violins A3–E5 moving by step, violas filling thirds, cellos A1–A2 against the bass
- Swells CC1 30% to 90% across each two-bar phrase, peaking on the change
- EQ and Compressor HP 200 Hz, bell −2 dB 2.5 kHz; 2:1, attack 30 ms, 2 dB
- Hybrid Reverb Hall, 2.6 s, pre-delay 30 ms, 22%
- You should hear
- Three string lines moving on their own and breathing with the harmony, a section rather than a pad.
- Live edition
- Suite
The strings are written as three lines — a high violin line, a middle viola line and a cello counter-line an octave above the bass — and each line moves on its own. They enter in the B section, lead the interlude, and sit above everything in the peak.
- Sampled strings in Sampler (or the orchestral multisample route); without samples, use the Wavetable ensemble recipe. One track per line.
- Write the lines: violins between A3 and E5, held notes that move by step at the chord changes; violas in the middle filling thirds; cellos from A1 to A2, moving opposite to the bass.
- Swells: draw CC1 (or a clip envelope on volume) from 30% to 90% across each two-bar phrase, peaking on the chord change, so the section breathes with the harmony. Details on swells and expression.
- In the interlude, the violin line becomes the melody: a little higher, louder by 3 dB, the reverb pre-delay raised to 45 ms so it stays in front.
- High-pass at 200 Hz and take 2 dB at 2.5 kHz so the strings never sit on the vocal chops.
Flute counter-melody (sampled flute, or Operator with a breath layer)
Quick start
- Load
- Operator, Auto Filter, LFO, Echo
- Set
- Tone: Operator Osc A sine, B sine ratio 2 at −24 dB; Auto Filter LP 12, 4 kHz
- Breath: Operator Osc A Noise, filter BP 2.5 kHz, Res 30%, chain at −18 dB
- Vibrato LFO on pitch about 5 Hz, 350 ms fade-in
- Phrases A Dorian, A3–E5, two to five notes ending long, a bar of rest after each
- Echo 3/16, feedback 25%, 15% wet, Ducking on
- You should hear
- A breathy woodwind answering in short phrases, straight on short notes and singing on long ones.
- Live edition
- Suite
A woodwind voice answers the strings in the second half of the B section and carries the hook in the peak. It plays short phrases with space between them — the call and response with the vocal chops is the point — and it has audible breath.
- Sampled flute in Sampler with release samples on; or the Operator rack above: a near-sine tone with a faint second harmonic, plus a band-passed noise chain at −18 dB for breath.
- Vibrato arrives late: an LFO on pitch at about 5 Hz with a 350 ms fade-in, so short notes stay straight and long notes sing.
- Write in A Dorian between A3 and E5, phrases of two to five notes ending on a long note, leaving at least a bar of rest after each phrase for the vocal chop to answer.
- Pitch a phrase up an octave above the instrument’s comfortable range for the peak. Documented: Bonobo likes acoustic instruments pitched beyond what they could play (Ableton).
- Echo at 3/16 (469 ms), feedback 25%, 15% wet, with Ducking on so repeats fall in the rests.
Nylon-guitar comp: the bossa push (recorded guitar, or Tension plectrum)
Quick start
- Load
- Tension, Compressor, EQ Eight, Utility
- Set
- Tension Plectrum, Body Guitar, Damping 45%, string decay medium
- Voicings above the Rhodes, Am9 on the top four strings around G3–E4; colour tones, not the root
- Rhythm quiet thumb note on beats 1 and 3, chord stabs on the off-beats
- Compressor 3:1, attack 8 ms, 3 dB
- EQ Eight HP 150 Hz, bell −3 dB 300 Hz, shelf +1.5 dB 5 kHz; Utility Width 60%
- You should hear
- A soft, high nylon comp in a bossa push that gives the groove a forward lean without clashing with the Rhodes.
- Live edition
- Standard and up
A soft nylon-string comp plays the chords in a bossa-derived rhythm — bass note on the beat, chord on the off-beats — high in register and low in level. It is the Thievery-side colour of the lineage, and it gives the groove a forward lean that the drums do not.
- Record a nylon guitar close (one mic around the 12th fret), or build it in Tension: Plectrum excitator, Guitar body, moderate damping, a short string decay. See synthesized guitars.
- Voice the chords above the Rhodes: Am9 on the top four strings (around G3–E4), D9 as F#3–C4–E4–A4. The guitar plays the chord’s colour tones, the Rhodes plays its body.
- Rhythm: a thumb note on beats 1 and 3 (very quiet; the bass owns the root) and chord stabs on the off-beats of the bossa pattern below.
- High-pass at 150 Hz and take 3 dB at 300 Hz — the thumb’s low end is what makes a guitar clash with a Rhodes.
Kalimba ornament (Collision, short arpeggio in the gaps)
Quick start
- Load
- Arpeggiator, Collision, EQ Eight, Echo
- Set
- Arpeggiator Up, 1/16, Gate 60%; hold A3–C4–E4–G4
- Collision Mallet Stiffness 70%, Noise off, Resonator 1 Beam, Decay 40%, Material 30%
- EQ Eight HP 700 Hz
- Clip every fourth step muted, Chance 85% on the off-16ths
- Echo 3/16, feedback 30%, Ping Pong, 20%
- You should hear
- A small, bright plucked figure with gaps, its dotted ping-pong repeats turning one part into two.
- Live edition
- Suite
A small, bright, plucked figure that plays only when the guitar is out: a four-note arpeggio in 16ths with gaps, panned off centre, with a dotted delay making a second, quieter part.
- Collision with Mallet on and Noise off; Resonator 1 Beam with a short decay. See Collision mallets for the full patch logic.
- Hold A3–C4–E4–G4 (Am7 tones) and let the Arpeggiator play it at 1/16 with a 60% gate; on the D9 bar, F#3–A3–C4–E4.
- Mute every fourth step in the clip so the figure has breath, and set note Chance to 85% on the off-16ths for small variations.
- Echo at 3/16 (469 ms) Ping Pong: the repeats fall on different 16ths, so one part becomes two.
Call-and-response vocal chops (Simpler slices, pitched, stacked)
Quick start
- Load
- Simpler, EQ Eight, Compressor, Echo
- Set
- Simpler Slice mode, Manual slices on syllables, Warp Complex Pro, Formants on, Fade In 5 ms, Fade Out 40 ms
- Call track syllables up 3–7 semitones, short, on the off-beats, pan R 25
- Response track at pitch or down a fourth, a bar later, pan L 25
- EQ and Compressor HP 300 Hz, LP 9 kHz; 4:1, 4 dB
- Echo 1/4 dotted, 20%, Ducking on
- You should hear
- One sung phrase replayed as two answering voices, high on the right and low on the left, never heard whole.
- Live edition
- Suite
One sung phrase cut into syllables and replayed as a melody, so the voice becomes an instrument. Two chop tracks answer each other: a higher “call” in the right ear, a lower “response” in the left. No lyric is ever heard whole.
- Take a phrase you have the rights to — your own voice, a singer you record, or a cleared sample — and, if it is in a mix, extract it with Stem Separation (see acapella extraction).
- Simpler in Slice mode, Manual, one slice per syllable. Play the slices from the keyboard to find six to eight that work as notes; pitch them into A Dorian with Transpose per slice (Simpler’s slice parameters) or by playing the clip in Classic mode at different keys.
- Call track: syllables pitched up 3–7 semitones, short, on the off-beats. Response track: syllables at pitch or down a fourth, a bar later. Documented: Bonobo chops a vocal line, takes syllables from different places, pitches them and stacks the layers in a call-and-response pattern (XLR8R).
- General slicing technique is on vocal chops; this element is only about placing them as two answering voices against the flute.
Found sound and the stretched drone bed (field recordings, Texture warp, Sampler patch)
Quick start
- Load
- EQ Eight, Spectral Time, Utility
- Set
- Field recording a minute with movement, HP 120 Hz, around −18 dB in the intro
- Drone bounce 8 bars of the peak, Warp Texture, Grain Size 120, Flux 40, stretched to 64 bars
- EQ Eight HP 120 Hz, LP 5 kHz
- Spectral Time Freeze off, Time Delay 1/4, Dry/Wet 25%
- Utility Gain −24 dB, Width 140%
- You should hear
- A place under the music: life from a field recording, over a low drone made from the track itself, in key and in timbre.
- Live edition
- Suite
Two textures give the track a place. A field recording (a room, a street, birds, a boat — anything with life in it) plays in the intro, the interlude and the outro. Under it, a section of the finished track is bounced and stretched many times longer into a drone, played very low. A third, optional use: a found sound turned into a pitched synth patch.
- Field recording: record on your phone, trim a minute with movement but no sudden peaks, high-pass at 120 Hz, and level it so it is heard only in the gaps — around −26 dB under the peak, −18 dB in the intro. See field recording treatment.
- Drone: once the peak section exists, bounce eight bars, set the clip to Texture warp and drag its end warp marker so eight bars play over 64. Low-pass it at 5 kHz. Documented: Bonobo runs a section of a track through an extreme time-stretch and brings it back low in the mix as a drone bed (XLR8R; he uses the standalone PaulStretch; this is a stock-Live route to a similar result).
- Found-sound patch: load a recorded sound with a pitched component (a fan, a motor, an air brake) into Sampler, loop a steady 200–400 ms region with a crossfade, and play it as a pad an octave below the Rhodes, quietly in the interlude. Documented: Bonobo layered a phone recording of a fan boat into a sampler as the base of a synth patch (XLR8R).
- Because the drone is made from the track itself, it is in key and in timbre with everything else; it glues the intro and outro to the body of the song.
Pitched reverb return: driven, re-pitched, ducked by its own source (send C)
Quick start
- Load
- Hybrid Reverb, Saturator, Shifter, Compressor, EQ Eight
- Set
- Hybrid Reverb Hall, 4.5 s, 100% wet, pre-delay 20 ms
- Saturator Soft Sine, Drive 6 dB
- Shifter +12 st, Window 80 ms, Dry/Wet 60%
- Compressor 4:1, sidechain from the source track, release 600 ms
- Send only on the last note of a phrase, 0 to −6 dB, then back
- You should hear
- The phrase-end note passes clean, then an octave-up driven shimmer blooms after it.
- Live edition
- Suite
A special-effect return for the end of phrases: the last syllable of a vocal call, a flute note or a Rhodes chord is sent to a reverb that is driven, shifted up an octave and compressed, with a sidechain from the dry source so the note passes clean and the shimmer blooms after it.
- Create a return with Hybrid Reverb at 100% wet, a 4–5 s hall. Follow it with Saturator Soft Sine for density, then Shifter at +12 semitones, partly wet.
- Add a Compressor with external sidechain from the source track you send most (the call vocal), 4:1, release around 600 ms — about one beat at 96 BPM.
- Automate the send only on the last note of a phrase (bars 47, 63, 79, 119, 143 in the arrangement above): 0 to −6 dB for one note, then back.
- Documented: Bonobo describes a live-set return where a reverb goes into a driver, then a re-pitcher, then a compressor, with a sidechain so the note passes cleanly before the reverb swells (XLR8R). The device choices above are this page’s stock-Live version.
Dub-lite space: one tape delay, one room (sends A and B)
Quick start
- Load
- Hybrid Reverb, Echo
- Set
- Room: Hybrid Reverb Convolution room IR, 0.9 s, pre-delay 8 ms, HP 300 Hz
- Room sends drums −14 dB, percussion −10 dB, guitar −16 dB
- Tape delay: Echo 3/16 L, 1/4 R, feedback 40%, Wobble 18%, Noise 8%
- Echo filter HP 250, LP 3 kHz, Ducking 35%
- Throws ridden by hand four or five times per section
- You should hear
- Drums, percussion and guitar in one short room, with warm tape throws on slides and phrase ends that never outstay their welcome.
- Live edition
- Suite
The other two returns are quiet and constant: a short room that puts the drums, percussion and guitar in one space, and a warm tape-style delay that takes the slides, the flute ends and the odd rim click. This is the Thievery / Nightmares on Wax link to reggae and dub, used lightly — throws, not a dub mix.
- Room: Hybrid Reverb with a short convolution room or a small algorithmic space, 0.8–1.0 s; send drums at −14 dB, percussion −10 dB, guitar −16 dB.
- Delay: Echo with different left and right times (3/16 = 469 ms and 1/4 = 625 ms), modest feedback, Wobble for tape movement, Ducking so repeats live in the gaps. Throw technique: dub throws.
- Ride the delay send by hand on four or five moments per section; at 96 BPM a 40% feedback tail lasts about two bars, so a throw never outstays its welcome.
Mix decisions
Sidechain map
| Source | Destination | Device | Amount | Why |
|---|---|---|---|---|
| Kick | Sub track | Compressor ext. SC | 2–3 dB, release 120 ms | The two low elements never stack; light enough not to pump |
| Vocal call | Strings group | Compressor ext. SC | 2 dB, release 400 ms | Strings make room for the chops without anyone hearing it |
| Vocal call | Pitched verb return | Compressor ext. SC | 4:1, release 600 ms | The swell blooms after the note (see the element) |
| Dry signal | Tape delay | Echo Ducking | 35% | Repeats fall into the rests |
| Flute | Nylon guitar | Compressor ext. SC | 1.5 dB | The two highest melodic voices take turns |
Nothing in this track should audibly pump. If you can hear a sidechain, halve it. The methods themselves are on compressor sidechain and Echo Duck.
Gain staging (pre-master, at the peak section)
| Bus | Peak | Note |
|---|---|---|
| Drums group | −10 dBFS | Kick and snare peaks; quieter than a club genre |
| Percussion | −16 dBFS | Felt more than heard |
| Sub + upper bass | −11 dBFS combined | Sub alone about −13 dBFS |
| Keys (Rhodes, bed, kalimba) | −13 dBFS | The Rhodes is the reference level for every melodic part |
| Strings + flute + guitar | −14 dBFS | In the interlude the strings rise to −11 |
| Master before limiter | −6 dBFS | Leaves room for 1–2 dB of Glue and 2–3 dB of limiting at most |
EQ carving
Bus structure
Width per element
| Element | Width | How |
|---|---|---|
| Sub, kick, snare | Mono | Utility Mono on sub and kick |
| Upper bass | Mono below 200 Hz, 80% above | Utility Bass Mono 200 Hz |
| Hats, ride | 70% | Utility Width; slow auto-pan |
| Percussion | Placed, not widened | Pan each drum like a percussionist’s set-up |
| Rhodes | 100% moving | Auto Pan-Tremolo |
| Strings | 120% | Violins left, violas centre-right, cellos centre-left |
| Flute, vocal call / response | Narrow, placed | Flute centre, call R 25, response L 25 |
| Drone, found sound | 140% | The widest and quietest things in the mix |
Build it yourself in 10 steps
- 96 BPM, A Dorian scale on in the set. Play the Rhodes vamp (Am9 → D9) on Electric for eight bars until it feels like a song on its own; add Strum and the slow Auto Pan.
- Play the drums in with Record Quantization off: soft kick, snare-plus-clap on 2 and 4, ghosts. Fix only the hits that are plainly wrong. Drum Buss lightly, Glue 2:1.
- Hats in Sampler with an S&H LFO on Sample Start; choked open hat on the and-of-4.
- Extract a groove from your drum take and apply it to the congas, shaker and bongos at 60% Timing.
- Bass: record or play Tension, then split with Audio From into a mono sub (LP 120) and an upper track (HP 120, Amp, Cabinet). Sidechain only the sub from the kick, 2–3 dB.
- Build the generative Rhodes bed: two Session tracks of chopped notes on 5-bar and 3-bar Follow Actions; record five minutes and keep the best.
- Write the B-section changes, then arrange three string lines with swells; add the flute call and the nylon-guitar comp, keeping them out of each other’s bars.
- Chop a sung phrase into two answering chop tracks; add the kalimba where the guitar rests.
- Arrange the arc: intro 16, Groove A 16, A2 16, B 16, interlude 16 (no kit, no bass), rebuild 16, peak 24, outro 24. Record a field recording and bounce and stretch the peak into a drone for the intro, interlude and outro.
- Three returns (room, tape delay, pitched verb) and a gentle master: Glue 2:1, Limiter −1 dBTP, about −11 LUFS integrated. Check that the interlude is clearly quieter than the peak — if not, the limiter is working too hard.
Variations
| Variation | What changes |
|---|---|
| Bonobo-style organic electronica (this page) | 94–100 BPM, hand-played kit, Rhodes, strings and woodwind added late, chops as call and response, generative beds. Documented methods: XLR8R, Ableton. |
| Soul-dub smoker | 88–92 BPM, a heavier hip-hop kit with a fatter snare and more room, the bass played as a reggae line with more rests, a sung hook instead of chops, more tape-delay throws, the strings replaced by a horn section in Sampler. Documented influences (jazz, hip-hop, reggae, rave) for Nightmares on Wax: Electronic Sound; the recipe is by ear. |
| Lounge / bossa-dub | 100–105 BPM, the nylon guitar becomes the lead rhythm part, a bossa-inflected kit with rim and brushes, a sitar-like line (Tension plectrum with a buzzy termination, or a recorded sitar) as the hook, more dub delay, a steadier bass. Documented style blend: Wikipedia; recipe by ear. |
| Upbeat organic house | 118–122 BPM, four-to-the-floor kick under the same percussion rack, the bass on 8ths, the Rhodes bed doubled in tempo, a longer peak. Documented: Bonobo’s later work is described as more upbeat (Wikipedia); see the deep house track for the four-to-the-floor craft. |
| Sunset chill-out room | 85–92 BPM, the kit removed for the first two minutes, the drone and field recording louder, strings and kalimba carrying most of the track, the drums arriving only for the peak. Documented: chill-out rooms and warm-up / cool-down sets are where downtempo was played (Wikipedia); closer to the ambient track. |
Live performance version
This style translates naturally to a band. Documented: Bonobo breaks his tracks into traditional band parts — keys, bass, drums — for live shows (Ableton), and has toured with a full band since 2010 (Wikipedia). The Session set below works two ways: alone, with Push playing the parts a band would; or with players, where Live runs the beds, chops and strings and the humans play kit, bass and keys.
Scenes
| Scene | Blueprint bars | Playing | Manual move |
|---|---|---|---|
| 1 Room | 0–16 | Field recording, drone, Rhodes bed live (Follow Actions running) | Play the Rhodes vamp by hand |
| 2 Groove A | 16–32 | + kit clip (or drummer), shaker, bass at 24 | Kit LP macro open over 8 bars |
| 3 A2 | 32–48 | + congas, guitar, chops | Launch call and response chop clips by hand |
| 4 B lift | 48–64 | B-section clips on keys and bass, strings, flute at 56 | Strings swell macro |
| 5 Interlude | 64–80 | Strings lead, kalimba, bed, room | Stop kit and bass on the downbeat; pitched-verb send on the last string note |
| 6 Rebuild | 80–96 | Hats, then the fill, then kit and bass at 88 | Play the fill on Push |
| 7 Peak | 96–120 | Everything, ride instead of hat | Flute line improvised in Scale mode |
| 8 Outro | 120–144 | Players leave in order | Stop buttons, one per phrase |
Performance rack and macros
Push mapping
- Pads, keys: Electric in Scale mode set to A Dorian, In Key; play the vamp and the B-section changes live. Aftertouch mapped to the Auto Pan amount.
- Pads, drums: the kit in a 16-pad layout with the clip running; play fills and ghost snares on top. Record Quantization off.
- Pads, chops: the two Simpler chop tracks side by side in Slice mode; call on the right half, response on the left.
- Encoders: the performance rack — Kit LP, Strings swell, Throw and Bloom on the first four.
- Follow Actions stay live: the generative Rhodes bed is the one part that runs as a random process on stage, so every night it is different.
Hardware and band integration
- With a live drummer, choose between Live following the drummer (tempo following) and the drummer playing to a click. Follow Actions and the Rhodes bed need a stable tempo, so most downtempo bands use the click.
- Route every player’s input to the same three returns. The shared room is what makes laptop parts and played parts sound like one band.
- A real electric piano through an audio input replaces Electric entirely; keep the Auto Pan-Tremolo and EQ chain on the input track.
- Record each show multitrack. The best improvised flute or keys phrases become the found sounds and chops of the next track.
Related
- New alongside this page: Famous Downtempo Tracks — the record-by-record analysis of this lineage
- Trip-hop / downtempo (genre page: groove, sub-styles, the lounge / Vienna downtempo row), Lo-fi hip-hop, Ambient, Deep house, Dub reggae
- Trip-hop track — the darker, dustier Bristol sibling of this page; Ambient track; Deep house track; Dub techno track
- Keys and mallets, Strings, brass and physical models, Guitar and band instruments, Hi-hats and percussion, Sub bass, Voice and vocals, Textures, foley and noise, Pads and atmospheres, Plucks and arps
- Sub bass rack, Vocal chop rack, Dub delay send rack, MIDI generator rack, Performance rack
- Reverb and space, Delay design, Sidechain and ducking, EQ strategies, Loudness and limiting, Performance and live
- MIDI tools, Sampler, Simpler and Drum Rack, Routing and resampling, Tuning, scales and MPE
- BPM to ms — delay times at 96, Note to Hz, Genre tempo map