Halftime IDM Track — Micro-Edited Drums & Granular Bass Deconstruction
A 144-bar archetypal experimental halftime track at 170 BPM (85 felt) in A minor: a halftime backbeat dressed in IDM micro-edits (stutters, ratchets, reversed slices, note probability), a sound-design bass resampled and then granulated, cinematic pads, a 7/8 section, a metric-modulation outro at 113.33 BPM and sparse, dramatic drops — built element by element in Live 12 and then as a Session-view live set.
- Difficulty
- Advanced
- Live edition
- Suite
- Max for Live
- In some recipes
The blueprint is a 144-bar track at 170 BPM — felt as 85 — in A minor, about 3 minutes 32 seconds, written as an archetype rather than a copy of any record. It sits where the halftime branch of drum and bass meets the IDM habit of editing drums at the scale of a single 1/64. Elements: a halftime kick and snare, a micro-edit lane of stutters and ratchets, reversed slices cut from the drums themselves, a probability-driven click and hat bed, a sound-design bass source that is resampled and then played back through Granulator III, a clean sine sub under it, cinematic pads, an impact "boom", spectral freezes and silences, a 16-bar 7/8 section and an outro that changes tempo by metric modulation. Three decisions make it work: (1) the backbeat never changes — kick on 1 and snare on 3 of each 170-bar — so every edit around it reads as decoration of a fixed frame rather than chaos; (2) the edits are made in three different places — MIDI (Chop and Chance), audio (sliced and reversed prints of the drums) and a live effect lane (Beat Repeat and a chain-selector glitch rack) — and each place has its own job; (3) the drops are sparse: each starts with a bar of near-silence or a freeze and then only sub, snare and a boom, so the weight arrives before the detail does.
- Tempo
- 170 BPM in Live (rolls, ratchets and LFO syncs at DnB speed), felt at 85. A 170-bar is 1411.8 ms; a beat 352.9 ms; 1/8 176.5 ms; 1/16 88.2 ms; 1/32 44.1 ms; 1/64 22.1 ms; 1/8T 117.6 ms; 1/16T 58.8 ms; dotted 1/16 132.4 ms; a felt (85) beat 705.9 ms
- Meter
- 4/4 throughout except bars 64–80, which are sixteen bars of 7/8 (seven 1/8s = 1235.3 ms, fourteen 1/16s per bar, grouped 2+2+3)
- Tempo shift
- Bars 128–144 at 113.33 BPM (170 × 2/3): the old dotted 1/16 (132.4 ms) becomes the new straight 1/16; a new bar is 2117.6 ms
- Key
- A minor with a Phrygian Bb in the pads; sub on A0 (55.0 Hz) with moves to F0 (43.7 Hz) and G0 (49.0 Hz); snare body tuned near 196 Hz (G2)
- Length
- 64 bars of 4/4 (90.4 s) + 16 bars of 7/8 (19.8 s) + 48 bars of 4/4 (67.8 s) at 170, then 16 bars at 113.33 (33.9 s) = 211.8 s ≈ 3:32
- Swing
- Kick and snare straight; clicks and hats 56% (Groove Pool, 16th swing at 60% Amount); the micro-edit lane deliberately unquantised in places (up to ±10 ms)
- Loudness
- −10 LUFS integrated, −8 short-term in the drops, −1 dBTP ceiling; the intro and the freezes are allowed to sit 12 dB under the drops
- Mood
- Cinematic, nervous, deliberate. Long held tones with a drum part that keeps breaking and repairing itself.
Where the archetype comes from
This page invents a track, so most of what follows is the page’s own recipe. The style traits it is built on are a mix of documented statements and listening:
- Documented: the IDM label is tied to Warp’s 1992 compilation Artificial Intelligence and an internet mailing list from 1993; Simon Reynolds describes a later-1990s phase with more forceful drum programming, partly in response to jungle (Wikipedia: Intelligent dance music).
- Documented: drill ’n’ bass grew in the mid-1990s as IDM artists borrowed from jungle and breakbeat, reworking breaks into irregular, often double-time patterns with powerful audio software (Wikipedia: Drill ’n’ bass). The micro-edit lane on this page is a slowed-down, halftime use of that habit.
- Documented: glitch is defined by the deliberate use of errors and artefacts as material, and Autechre’s 1994 track "Glitch" is cited as one of the earliest uses of the word (Wikipedia: Glitch (music)).
- Documented: Machinedrum told The Quietus he was "starting these songs at faster bpms and sort of exploring the half-time relationship" (The Quietus, 2013). In a 2012 Ableton interview he says he works mostly with Live’s own devices, gated a grain-delay synth to the drum track, and gated a field recording so it pulses with the drums (Ableton blog, 2012). The gated texture under this page’s drums follows that idea.
- Documented: Ivy Lab are described as pioneers of the halftime subgenre of drum and bass, running their own 20/20 LDN label (Wikipedia: Ivy Lab); in a Mixmag cover feature Sabre talks about finding room to work at 85 BPM and about an urge to move into cinematic territory (Mixmag).
- Documented: Alix Perez and Eprom’s Shades project, active since 2015, is described as focusing on experimenting with and deconstructing typical bass-music sound design (Wikipedia: Eprom).
- Documented: dBridge runs Exit Records, and in 2013 he and Kid Drama launched the Heart Drive podcasts, presented as previews of "autonomic" tracks (Wikipedia: dBridge). The common claim that the Autonomic sound seeded later halftime is scene knowledge, not documented fact: By ear.
- Documented (tools): Live 12’s per-note Chance, Velocity Deviation, Play One grouping and Chop Note(s) on Grid are described in the Live 12 manual, Editing MIDI; Beat Repeat, Roar, Spectral Time and Shifter parameters are in the Live 12 Audio Effect Reference; Granulator III’s Classic, Loop and Cloud modes and its capture of live audio are on Ableton’s Granulator III page. Ableton also published a video of Mr. Bill making glitch in Live with tips on modulation and arranging a complex piece (Ableton blog, 2013); the chain-selector rack below is forum technique in that spirit, not his documented patch.
- By ear: the 7/8 section, the metric-modulation outro, the freeze-then-sparse drops and the granulated resample as the main bass are conventions heard across experimental halftime and are combined here as this page’s recipe. No named producer has documented the exact devices below.
Arrangement
The intro (0–16, 22.6 s) is the cinematic pad and the gated texture, with clicks fading in at bar 8 and a reversed slice into bar 16. The Statement (16–32) brings the halftime frame in thinly: the kick from 20 with its notes at 60% Chance, the snare every second bar from 24, and a ratchet build from 28. Bar 31 is a spectral freeze of the pad and the last snare. Drop 1 opens at bar 32 with only sub, snare and the boom; the kick returns at 34 and granular bass A at 36, and the edit lane starts at 40. The Fracture (64–80) re-cuts everything into 7/8 for 19.8 s: the same sounds, the bass loop shortened to seven 1/8s. Hold (80–96) is pad and texture only, and bar 95 is a full bar of silence (1.41 s) except for one reversed slice. Drop 2 (96–128) repeats the sparse opening, then bass B — the same resample regrained — from 100, with the edit lane at its densest in 124–128. The Shift (128–144) slows to 113.33 BPM by metric modulation so the hats that were in dotted 1/16s become straight 1/16s, and the track ends on the pad.
Energy curve
Page recipe. In a halftime track a drop is mostly the arrival of low end. If the edits arrive at the same moment, the listener hears clutter instead of weight. So each drop is weight first (bars 32–36 and 96–100) and edits second, and the biggest edit moment (124–128) is placed where it can lead into the tempo change.
Transitions
Four bar-level moves carry the transitions. Each grid shows the last bar before the change and the first bar after it.
Frequency layering
Page recipe. Granulated audio spreads energy across a wide band and smears transients, so it masks far more than a synth bass with the same level. Three rules keep it clear: the granular bass is high-passed at 150 Hz and never carries fundamental (the sine sub does); the pad is high-passed at 250 Hz and ducked by the bass group in the drops; and the edit lane is high-passed at 400 Hz, because a stutter of a full-range drum loop repeats the kick’s low end as a buzz.
Element by element
The halftime frame: kick on 1, snare on 3, never moved
Quick start
- Load
- Drum Rack, Drum Sampler, Drum Buss, Compressor
- Set
- Kick Drum Sampler, Pitch Env 30%, Decay 180 ms
- Snare three-layer rack, body retuned to 196 Hz, Decay 130 ms
- Notes kick on step 1, snare on step 9, Chance 100%, Velocity Deviation 0
- Drum Buss Drive 6%, Crunch off, Transients +15, Boom off; Compressor 4:1, attack 3 ms, release 60 ms, 3 dB
- Print resample 8 bars to an audio track named “Frame print”
- You should hear
- A plain, fixed halftime kick and snare that never varies, printed to audio as the floor the edits will cut against.
- Live edition
- Standard and up
The frame is deliberately plain. Kick on step 1 and snare on step 9 of every bar at 170 BPM, plus one displaced kick per bar. The snare is built as in the Halftime track snare but tuned to G2 (196 Hz) and shorter, because the edit lane will fill the space after it. The skeleton itself is taught on Halftime and footwork; what is new here is that the frame is printed to audio after it is finished, so it can be sliced.
- Kick: Drum Sampler with a short kick, Playback Effect Pitch Env at 30% for a 50 ms knock; Decay 180 ms so it is gone before beat 2 of the felt bar.
- Snare: build the three-layer rack from the halftime page, then retune the body to 196 Hz and shorten Decay to 130 ms.
- Program the 2-bar frame above. Set both notes to Chance 100% (they never vary) and Velocity Deviation 0.
- Group the drums, add Drum Buss and the Compressor, and resample 8 bars to a new audio track named "Frame print". This print is the source for the reversed slices and the edit lane.
MIDI ratchets with Chop Note(s) on Grid
Quick start
- Load
- Drum Rack
- Set
- Ratchet pad a duplicate of the snare, EQ’d thinner, HP 400 Hz
- Chop one note before beat 3, grid 1/16, Cmd E: four notes
- Finer grid 1/32 to chop a 1/16 into two; into four for 1/64
- Velocity Ramp 40 → 110 into the snare, or 110 → 30 to die away
- Ornament on one ratchet in four, for a flam on its first hit
- You should hear
- Snare ratchets that crescendo into the backbeat or die away, with the occasional flam, while the kick stays clean.
- Live edition
- Intro and up
A ratchet is one note split into equal repeats. Live 12’s Chop command does this directly: select a note, set the grid, press Cmd E (Ctrl E), and the note is divided into parts on the grid; Shift changes the count by powers of two. Ratchets sit on a duplicate of the snare and a short click, never on the kick.
- Duplicate the snare pad to an empty pad and EQ it thinner (HP 400 Hz) so ratchets do not double the body.
- Draw a single note one beat long before beat 3. Set the grid to 1/16 and Chop: four notes.
- For a 1/32 ratchet, set the grid to 1/32 and chop a 1/16 note into two; for 1/64, chop it into four (22.1 ms apart at 170).
- Use the Velocity Ramp (Ramp Start Value / Ramp End Value) on the chopped notes: 40 → 110 for a crescendo into the snare, or 110 → 30 for a ratchet that dies away.
- Apply the Ornament transformation to one ratchet in four for a flam on its first hit.
Probability: Chance, Velocity Deviation and Play One groups
The click and hat bed and the edit-lane triggers are written once and varied by probability, so a looped 2-bar clip never repeats exactly. Each lane gets a different probability policy: the frame is 100%, ghosts 50–70%, ornaments 15–35%, and some cells are Play One groups where Live picks one of several stacked notes each pass.
| Lane | Chance | Velocity Deviation | Grouping |
|---|---|---|---|
| Kick, snare (frame) | 100% | 0 | — |
| Kick, Statement section | 60% | −20 | — |
| Clicks | 70% on 8ths, 35% on off-16ths | −30 | — |
| Hats | 85% | −25 | — |
| Reversed-slice triggers | 25% | 0 | Play One: three slices stacked |
| Edit-lane chain triggers | 30% | 0 | Play One: four chain-select notes stacked |
- Open the Chance Editor lane in the clip. Select the click off-16ths and drag them to 35%; the 8ths to 70%.
- Select all hats and use the Randomization Amount slider with Randomize for slightly different chances per note around 85%.
- Stack three notes (three slices) on step 15, select them and group as Play One. Set the group’s chance to 25%.
- Use Velocity Deviation (Cmd-drag from the velocity marker) for a negative range so random hits only get quieter, never louder than written.
Reversed slices cut from the drum print
Quick start
- Load
- Simpler, EQ Eight, Auto Filter, Hybrid Reverb
- Set
- Simpler the Frame print, Slice mode, Slice by Beat 1/8, Playback Mono, Reverse on
- EQ Eight HP 200 Hz, LP 9 kHz
- Auto Filter band-pass 12, 1.2 kHz, Res 20%
- Hybrid Reverb Quartz 0.8 s, 15%
- Placement a 1/8 slice triggered on step 15 so it ends on step 1 of the next bar
- You should hear
- The track's own drums swelling backwards into each downbeat, related to the beat rather than added on top.
- Live edition
- Suite
The 8-bar frame print is loaded into Simpler in Slice mode and played backwards slice by slice. Because the slices are the track’s own drums, the reversals sound related rather than added. They are used as pickups into downbeats (the last beat of a bar) and as Play One fills.
- Drag the Frame print into Simpler, switch to Slice mode, slice by Beat at 1/8 (64 slices across 8 bars).
- Turn on Reverse. Each slice now plays its 1/8 backwards: a snare slice becomes a 176 ms swell into the next hit.
- Program reversed snare slices so they end exactly on the downbeat: a 1/8 slice triggered on step 15 of a bar ends on step 1 of the next.
- For longer swells (the 353 ms reversal into bar 96), use a second Simpler in Classic mode with the snare-and-tail slice, Reverse on, sample end trimmed to one beat.
The edit lane: Beat Repeat stutters on a dedicated return
Quick start
- Load
- Beat Repeat, Redux, EQ Eight
- Set
- Return C fed from the Drums group, send at −inf by default
- Beat Repeat Interval 1 Bar, Offset 8/16, Grid 1/16, Variation 1/8, Chance 40%, Gate 4/16
- Beat Repeat tone Pitch −2, Pitch Decay 30%, Mix mode Insert, Filter on 3 kHz
- Redux Bits 10, Rate 16 kHz, Jitter 10%; EQ Eight HP 400 Hz
- Sections grid and chance automated per section, up to 1/64 at 100% at the end of Drop 2
- You should hear
- Stutters that replace the drums when the send opens, at a constant level, getting finer and denser section by section.
- Live edition
- Standard and up
Stutters are an effect, not a programmed part. The drum group feeds a return through a send that is normally at −inf; the return carries Beat Repeat in Insert mode, so when the send opens the stutter replaces the drums rather than adding to them. Chance and grid are automated per section.
| Section | Grid | Chance | Gate | Pitch Decay |
|---|---|---|---|---|
| Statement 28–32 | 1/16 → 1/32 | 100% (written) | 8/16 | 0% |
| Drop 1 40–64 | 1/16, Variation 1/8 | 40% | 4/16 | 30% |
| Fracture 76–80 | 1/16T | 60% | 6/16 | 20% |
| Drop 2 104–124 | 1/32, Variation 1/16 | 55% | 4/16 | 40% |
| Drop 2 124–128 | 1/64 | 100% | 16/16 | 60% |
Beat Repeat’s full parameter set is taught on Glitch and IDM sounds: Beat Repeat deep-dive.
Chain-selector glitch rack driven by probability notes
Quick start
- Load
- Audio Effect Rack, Grain Delay, Spectral Time, Shifter, Redux
- Set
- Audio Effect Rack on the drum group after Drum Buss, five chains, zones 0–4 in the Chain Select editor
- Tape stop Grain Delay, Delay 1 ms, Pitch −12 → −24, Feedback 0
- Freeze grain Spectral Time Freezer Retrigger, Sync 1/16; Redux Bits 8
- Ring Shifter Ring, 440 Hz, Drive on
- Chain macro square steps 1/16 or 1/8 long on the last beat of every second bar, back to 0 on every downbeat
- You should hear
- Four learnable kinds of breakage firing briefly at the ends of bars, always snapping back to clean drums on the downbeat.
- Live edition
- Suite
A second edit tool sits on the drum group itself: an Audio Effect Rack with five chains, one clean and four broken, selected by a Chain Selector macro. A MIDI track sends notes to a Max for Live mapping (Expression Control or a simple MIDI-to-macro mapper) — or the Chain Selector is just automated — and those notes carry Chance and Play One grouping, so which glitch fires, and whether any does, changes every pass.
- Build the rack on the drum group after Drum Buss, five chains as shown; set each chain’s zone in the Chain Select editor to one value (0–4).
- Automate the Chain macro in short steps (1/16 or 1/8 long) on the last beat of every second bar — or map notes to it via Expression Control if you prefer to write it as MIDI.
- For the MIDI route, stack four chain notes per edit point, group them Play One, and set group chance to 30%.
- Return to selector 0 on every downbeat; draw the automation as square steps, never ramps.
Click and hat bed from Erosion, Redux and DC pulses
Quick start
- Load
- Drum Rack, Operator, Redux, Erosion
- Set
- Click Operator sine at a fixed 4 kHz, amp decay 6 ms; a copy at 7 kHz
- Noise tick Operator noise, decay 25 ms, Auto Filter band-pass at 8 kHz
- Redux Bits 12, Rate 22 kHz
- Erosion Sine, 6 kHz, 25%
- Groove Pool 56% swing on this clip only
- You should hear
- A fast, fine surface of gritty digital clicks at 1/16 and 1/32 sitting behind the snare crack, with no second backbeat.
- Live edition
- Suite
The top end is not a hi-hat sample but synthetic clicks: very short Operator blips and filtered noise, made gritty with Redux and Erosion, at the probabilities shown above. They give the halftime frame a fast, fine surface at 1/16 and 1/32 without a second backbeat.
- Operator, one sine oscillator at a fixed 4 kHz, amp decay 6 ms. Duplicate it on a second pad at 7 kHz for variation.
- Noise tick: Operator noise oscillator, decay 25 ms, through the pad’s own Auto Filter band-pass at 8 kHz.
- Redux and Erosion on the rack output; the gentle bit reduction gives the clicks a digital edge that sits behind the snare crack.
- Program the probability grid from the previous element. Apply 56% swing from the Groove Pool to this clip only.
More click-and-cut sources are on IDM and glitch: clicks and cuts.
The sound-design bass source: Operator FM into Roar Feedback
Quick start
- Load
- Operator, LFO, Roar, Shifter, Spectral Resonator
- Set
- Operator Algorithm 1, Osc A sine, B ratio 1.5 at 70%, C ratio 3.01 at 40%, D ratio 0.5 feedback 30%
- LFO sync 1/8T on Osc B level, 40–80%
- Roar Feedback mode, Shaper Soft Sine 10 dB, Feedback Amount 35%, filter BP 600 Hz
- Shifter Freq mode, +7 Hz, Wide on, 20%
- Spectral Resonator Freq A2, Use Current Scale, Decay 300 ms, 25%; resample A1 and F1, 4 bars
- You should hear
- A metallic, slowly beating FM tone that pulses in triplets against straight drums, recorded as raw material.
- Live edition
- Suite
The bass is designed as raw material, not as a playable patch. Four bars of an FM tone with moving ratios and index go through Roar’s Feedback routing, are recorded, and from then on only the recording is used. Unlike the neuro bass on the halftime page, nothing here is sliced to 1/16: the recording will be granulated.
- Operator, a straight stack (Algorithm 1). Ratios 1.5 and 3.01 give inharmonic, metallic sidebands; the 0.01 detune makes them beat slowly.
- Max for Live LFO at 1/8T (117.6 ms) on Osc B level: the timbre pulses in triplets against the straight drums.
- Roar in Feedback routing with a modest Feedback Amount — the resonance is what makes the tone feel designed. Shifter in Freq mode adds a 7 Hz offset for an unsettled beating.
- Spectral Resonator at 25%, Use Current Scale on, keeps the inharmonic parts near A minor.
- Hold A1 for two bars, F1 for two bars, resample 4 bars (5.6 s). Do three takes with different LFO depths; keep all three.
The general resample loop is on Resampling workflow: the resample cascade; Roar itself on Roar and saturation.
Granular bass: Granulator III Loop mode on the resample
Quick start
- Load
- Granulator III, Auto Filter, Roar, EQ Eight
- Set
- Granulator III Loop mode, resample take 2, position on the most resonant part
- Bass A grain size 180 ms, small spray
- Bass B position 60%, size 60 ms, spray 40 ms, stored as a Macro Variation
- Auto Filter LP 24, 2.5 kHz; Roar Single, Tube Preamp 4 dB
- EQ Eight HP 150 Hz (48 dB)
- You should hear
- The same designed tone regrained: smooth and close to the source in Drop 1, grainier and more broken in Drop 2.
- Live edition
- Suite
- Max for Live
- Needed
The 4-bar resample is loaded into Granulator III and played from MIDI. Loop mode plays a small region rhythmically; position and grain size are what change between bass A (Drop 1) and bass B (Drop 2), so the second drop is the same sound regrained rather than a new patch.
- Load resample take 2 into Granulator III and choose Loop mode. Set position on the most resonant part of the take.
- Grain size 180 ms, small spray: the result is close to the source but smoothed. This is bass A.
- Program the phrase above. The granular layer plays A1 / G1 / F1; the sub (next element) plays the same notes two octaves lower.
- Store a Macro Variation; then move position to 60%, size to 60 ms, spray 40 ms for a grainier, more broken version: bass B. Store it.
- In the Fracture section, shorten the bass clip loop to 3.5 beats (seven 1/8s) and keep bass A.
Sine sub under a granular bass
Quick start
- Load
- Operator, EQ Eight, Utility, Compressor
- Set
- Operator Osc A sine, Voices 1, Glide 40 ms
- Amp envelope A 4, D 600, S 0.85, R 80
- EQ Eight HP 28 Hz, LP 120 Hz (48 dB); Utility Mono
- Kick sidechain Compressor keyed from the kick, 5 dB, release 70 ms
- Boom sidechain Compressor keyed from the boom, 6 dB, release 400 ms
- You should hear
- A pure, steady sine fundamental under the granular phrase, ducking for kick and boom.
- Live edition
- Suite
Granulation smears phase and moves energy between octaves, so the fundamental can never come from the grains. A pure Operator sine plays A0, G0 and F0 under the granular phrase, slightly longer and simpler, and is the only thing below 120 Hz besides the kick and the boom.
Sub technique in general: Sub bass.
Cinematic pad: Meld into Hybrid Reverb, with a Phrygian colour
Quick start
- Load
- Meld, Chorus-Ensemble, Hybrid Reverb, Auto Filter, Utility
- Set
- Meld Engine A Swarm Saw, spread 25%; Engine B Harmonic FM, −12 st; Filter LP 1.8 kHz
- Chords Am(add9) to Bbmaj7(#11) over A, each held four bars
- Hybrid Reverb Dark Hall 6 s with a hall convolution, Blend 40, on the pad's own chain
- Auto Filter HP 250 Hz; Utility Width 140%
- Drops pad automated down 8 dB
- You should hear
- A wide, slow two-chord pad where the Bb over the A pedal makes it read as film rather than pad.
- Live edition
- Suite
The harmony is one slow two-chord move, Am(add9) to Bbmaj7(#11) over A, each held four bars. The Bb against the A pedal is the Phrygian colour that makes it read as "film" rather than "pad". It owns the intro, Hold and Shift; in the drops it is low and high-passed.
- Meld, Swarm Saw on engine A for width, a Harmonic FM engine an octave down for body.
- Hybrid Reverb with Dark Hall and a hall convolution blended in; keep it on the pad’s own chain, not a send, so the freezes (next elements) can catch it.
- High-pass at 250 Hz, Width 140%. In the drops automate the pad down 8 dB and let the sidechain take care of the rest.
Pad design in general: Pads and atmospheres; the halftime cinematic top on Halftime and footwork.
The boom: impact for sparse drops
Quick start
- Load
- Operator, Saturator, Corpus, Hybrid Reverb
- Set
- Drop Operator sine, pitch env −24 st over 600 ms; Saturator Soft Sine 4 dB; LP 400 Hz
- Metal Operator noise, D 80 ms, Corpus Pipe, Decay 60%, Tune A2, HP 800 Hz, at −10 dB
- Tail Operator noise, D 300 ms, Hybrid Reverb Tides, 8 s, 100% wet, HP 300 Hz, at −14 dB
- Placement one impact on each drop downbeat
- Sub ducked for the boom's first 400 ms
- You should hear
- One impact per drop: a sine falling two octaves with a metallic surface and a long tail that doesn't cloud the sub.
- Live edition
- Suite
Each drop downbeat (bars 32, 64, 96, 128) gets one impact: a sine that falls two octaves over 600 ms, a noise burst through Corpus for a metallic surface, and a long reverb tail high-passed so it does not cloud the sub. It ducks the sub for its first 400 ms so the two do not stack.
Impacts in general: FX, risers and impacts.
Freezes and silences: Spectral Time before every drop
Quick start
- Load
- Spectral Time, EQ Eight
- Set
- Return D: Spectral Time Freezer on, Manual mode, Fade In 20 ms, Fade Out 300 ms, Delay off
- Freeze on at bar 31 beat 3, off at bar 32 beat 1
- Sources send levels to 0 dB and track activators off at the same point
- EQ Eight HP 180 Hz on the return
- Bar 95 every track off, reverb returns too, except the reversed-slice track
- You should hear
- The music held as a frozen spectrum for half a bar before each drop, and one true silence broken only by a reversed slice.
- Live edition
- Suite
Bars 31, 63 and 127 are frozen: Spectral Time on a return catches the master’s music group at beat 3 and holds it for the rest of the bar while the source tracks are muted. Bar 95 goes further: everything is cut, and only one reversed slice fills its last beat. A freeze says "hold on", a silence says "here it comes".
- Return D carries Spectral Time with the Freezer on, Manual mode. Automate the Freeze button on at bar 31 beat 3 and off at bar 32 beat 1.
- At the same point automate the send levels to 0 dB and mute the sources (track activators), so only the frozen spectrum is heard for half a bar (706 ms).
- Bar 95: automate every track’s activator off for the whole bar except the reversed-slice track. Cut the reverb returns too — a reverb tail spoils a silence.
- Check on headphones that bar 95 is truly silent until its last beat; then add a −40 dB gated texture back if pure digital silence feels like a dropout.
The Fracture: sixteen bars of 7/8
Quick start
- Load
- Beat Repeat
- Set
- Meter time-signature change to 7/8 at bar 64, back to 4/4 at bar 80
- Clips drum, click and bass clips duplicated in, each loop shortened to 3.5 beats
- Kick displaced hit on step 7; snare stays on step 9
- Beat Repeat Interval 1 Bar, Grid 1/16T for this section only
- Rim layer Euclidean generator, 7 steps, 3 pulses
- You should hear
- Sixteen bars where the bar end comes early while the backbeat stays put, felt in the bar end, not the snare.
- Live edition
- Intro and up
Bars 64–80 change the meter to 7/8 with a time-signature marker in the Arrangement. Nothing new enters: the frame, clicks, sub and bass A carry over, each clip shortened to 3.5 beats. The 2+2+3 grouping keeps the halftime snare where it was (the start of the 3-group, step 9) so the change is felt in the bar end, not in the backbeat.
- Right-click the Arrangement scrub area at bar 64 and insert a time-signature change to 7/8; insert 4/4 again at bar 80.
- Duplicate the drum, click and bass clips into bars 64–80 and set each clip’s loop length to 3.5 beats (0.3.2 in bars.beats.sixteenths).
- Re-program the kick so its displaced hit lands on step 7 (the end of the second 2-group); keep the snare on step 9.
- Set the Beat Repeat Interval to 1 Bar so it follows the shorter bar; the Grid in 1/16T for this section only (see the edit-lane table).
The Shift: metric modulation to 113.33 BPM
Quick start
- Load
- Beat Repeat
- Set
- Hats from straight 1/16s to dotted 1/16s from bar 124
- Song Tempo a step, not a ramp, from 170 to 113.33 exactly at bar 128
- Clips audio clips that cross the change set to warp (Beats or Complex)
- New clip straight 1/16 hats, kick on 1, snare on 3
- Synced effects Beat Repeat and other synced rates slow by a third; Glitch Selector off
- You should hear
- Hats carrying on at exactly the same speed while kick and snare drop by a third into a slow beat.
- Live edition
- Intro and up
From bar 124 the hats move from straight 1/16s to dotted 1/16s (every three steps). At bar 128 the song tempo is automated as a step from 170 to 113.33: the dotted 1/16 at the old tempo equals a straight 1/16 at the new one (132.4 ms), so the hats carry on at the same speed while kick and snare slow down by a third. The track ends as a slow beat.
- In the Arrangement, show the Main track’s Song Tempo automation and draw a step (not a ramp) from 170 to 113.33 exactly at bar 128.
- Set every audio clip that continues across the change to warp (Beats or Complex) so it follows the new tempo; the boom at 128 should be MIDI so it is unaffected.
- Program the 113.33 drum clip from the transition grid above: straight 1/16 hats, kick on 1, snare on 3.
- Check synced effects: Beat Repeat, Echo and LFO rates are tempo-synced and will slow by a third. This is part of the effect; turn the Glitch Selector off for the Shift.
Gated texture: a field recording keyed to the drums
Quick start
- Load
- Gate, EQ Eight, Grain Delay, Utility
- Set
- Field recording 2 min, warp off, running the whole track
- Gate sidechain Drums group, Threshold −30 dB, Attack 0.5 ms, Hold 40 ms, Release 120 ms, Floor −20 dB
- EQ Eight HP 1 kHz, LP 12 kHz
- Grain Delay Spray 20 ms, Pitch +7, Feedback 20%, 25% wet
- Utility Width 150%, Gain −30 dB
- You should hear
- A quiet physical space that opens only on drum hits, gluing the edits together and filling silences with something that isn't reverb.
- Live edition
- Standard and up
A long field recording (rain on metal, room tone, distant traffic) runs the whole track at −30 dB, through a Gate keyed from the drums group so it opens only on hits. It glues the edits to a physical space and fills the silences with something that is not reverb.
Mix decisions
Sidechain map
| Source | Destination | Device | Amount | Why |
|---|---|---|---|---|
| Kick | Sub | Compressor ext. sidechain | 5 dB, release 70 ms | Kick transient stays clean |
| Boom | Sub | Compressor ext. sidechain | 6 dB, release 400 ms | Boom and sub never stack on drop downbeats |
| Snare | Bass group | Multiband Dynamics, sidechain, 150–300 Hz and 2.5–5 kHz | 4 dB each band | Granular bass steps aside on beat 3 only |
| Bass group | Pad | Compressor ext. sidechain | 4 dB, release 300 ms | Pad sits under the bass in drops |
| Return C (edit) | Drums group | Compressor ext. sidechain | 12 dB, attack 0.1 ms, release 30 ms | Stutter replaces the drums instead of doubling them |
| Drums group | Gated texture | Gate sidechain | Threshold −30 dB | Texture breathes with the hits |
EQ carving
Bus structure
Width per element
| Element | Width | How |
|---|---|---|
| Kick, sub, snare body, boom drop | Mono | Utility Mono / Bass Mono |
| Granular bass | Mono below 200 Hz, 100% above | Utility Bass Mono 200 Hz |
| Ratchets, reversed slices | 100–120% | Utility Width |
| Edit return | 140% | Utility Width after Beat Repeat |
| Clicks / hats | 130%, auto-panned | Auto Pan-Tremolo 1/16T |
| Pad, texture | 140–150% | Utility Width; check mono fold-down |
Headroom
| Bus | Peak before Main | Note |
|---|---|---|
| Drums group | −6 dBFS | Snare hits are the loudest peaks |
| Sub | −8 dBFS | Sine peaks are predictable |
| Bass group | −10 dBFS | Granular peaks vary ±3 dB between passes |
| Music group | −14 dBFS in drops, −8 in Hold | Automated, not compressed |
| Main before Limiter | −3 dBFS | Limiter takes 2–3 dB in drops, nearly none in Hold |
Build it yourself in 10 steps
- 170 BPM, A minor. Build the frame: kick on 1, snare (tuned to G2, 130 ms) on 3, one displaced kick. Group, Drum Buss, Compressor. Loop it until it is boring; that is the point.
- Print 8 bars of the frame to audio. Slice it in Simpler by 1/8, Reverse on, and program reversed pickups into downbeats.
- Make the ratchet pad (thinned snare duplicate) and chop notes into 1/16, 1/32 and 1/64 ratchets before beat 3; ramp their velocities.
- Synth clicks and noise ticks in a Drum Rack with Redux and Erosion; set their Chance (70% / 35% / 85%) and Velocity Deviation; add Play One groups for reversed slices.
- Return C with Beat Repeat in Insert mode, fed by a send from the drums group that ducks the group via sidechain; build the five-chain Glitch Selector on the drums group.
- Design the bass source: Operator FM with a 1/8T LFO, Roar Feedback, Shifter, Spectral Resonator. HP 150, resample three 4-bar takes.
- Load a take into Granulator III Loop mode; store Bass A and Bass B as Macro Variations. Add the Operator sine sub on the roots, LP 120, mono, ducked by kick and boom.
- Meld pad with the Am(add9) → Bb over A move, Hybrid Reverb, HP 250; the boom rack; the gated field-recording texture; Return D with Spectral Time.
- Arrange 144 bars: intro 16, Statement 16, Drop 1 32 (sparse first 2–4 bars), Fracture 16 in 7/8, Hold 16 (silence bar 95), Drop 2 32 (Bass B), Shift 16 at 113.33 with dotted-1/16 hats preparing it from bar 124.
- Main: EQ Eight, Glue 2:1, Limiter −1 dB ceiling, about −10 LUFS integrated. Listen to bars 95–100 on a system with a sub: the drop should feel heavier than any edited bar in the track.
Variations
| Variation | What changes |
|---|---|
| Drill ’n’ bass break | Replace the edit lane with a hand-programmed break at 170 full-time (1/64 rolls, pitch per hit) for Drop 2 only; the halftime frame returns for the Shift. Technique on IDM and glitch: hand-edited breaks. |
| Ambient halftime | Drop the edit lane and ratchets to 10% chance, lengthen the pad to 8-bar chords, use Granulator III Cloud mode for the bass and let the sub carry the drops alone. See Ambient. |
| Footwork-leaning | Tempo 160, kick in triplet patterns, the 7/8 section becomes a 3-against-4 polyrhythm in 4/4, and the reversed slices become vocal chops. See Halftime and footwork. |
| Neuro halftime | Keep the edits but replace the granular bass with the sliced neuro bass from the Halftime track; this moves the track toward the dancefloor and loses the cinematic side. |
| Beat-scene ending | Make the Shift longer (32 bars at 113.33) and swing its drums 60%, so the track ends as an LA-style beat. Or modulate to 85 exactly (170 × 1/2) and play the frame in full-time feel. |
Live performance version
Most of this track is already performable: probability makes clips vary on their own, and the edits live on macros and a return. The live set keeps the frame and pad as Session clips, plays ratchets and reversed slices from Push, and leaves the stutter, glitch and freeze to hands. The meter and tempo changes use Live’s scene tempo and time signature, so a scene launch performs them.
Scenes
| Scene | Blueprint bars | Scene tempo / meter | Playing | Manual move |
|---|---|---|---|---|
| 1 Intro | 0–16 | 170, 4/4 | Pad, texture, clicks from bar 8 | Pad filter macro |
| 2 Statement | 16–32 | 170, 4/4 | + kick at 60% chance, snare every 2 bars | Ratchet pads; Freeze on the last half-bar |
| 3 Drop A | 32–64 | 170, 4/4 | Sub, snare, boom; then kick, bass A, clicks | Stutter macro from bar 40; Glitch chain pads |
| 4 Fracture | 64–80 | 170, 7/8 | Same parts, 3.5-beat clips | Stutter grid to 1/16T |
| 5 Hold | 80–96 | 170, 4/4 | Pad, texture | Stop all except the reversed-slice track for the silence bar |
| 6 Drop B | 96–128 | 170, 4/4 | Sub, snare, boom; then bass B variation | Bass macro variation B; Stutter to 1/64 at 124 |
| 7 Shift | 128–144 | 113.33, 4/4 | Slow frame, straight hats, pad | Glitch Selector off; pad up |
Performance rack
Push mapping
- Pads, drums: 16-pad Drum Rack layout with the frame, the ratchet snare, three click pads and four reversed-slice pads. Note Repeat at 1/32 and 1/64 on the ratchet pad for live ratchets; aftertouch mapped to the ratchet pad’s filter.
- Pads, glitch: a second Drum Rack layout whose pads send the chain-select notes (0–4); hold a pad for as long as the glitch should last.
- Encoders: the eight macros in order; Stutter, Freeze and Bass grain are the three most used.
- Scene launch: Global Quantization 1 Bar so the Fracture and Shift scenes switch meter and tempo on a barline; launch Hold one bar early when you want the silence bar.
- Probability live: duplicate clips with higher Chance values (Drop B versions) and launch them in place of the originals to raise edit density without touching a control.
Hardware integration
- CV Tools’ clock at 1/8T keeps the hardware bass source’s movement in the same triplet relationship as the studio LFO.
- Capture a fresh 4 bars into Granulator III during Hold (bars 80–96); 22.6 s is enough time to capture, set position and be ready for bar 100.
- Compensate External Audio Effect and External Instrument latency once; the frame must stay locked or the edit lane slices the wrong part of the bar.
- Hardware drum machines do not follow Live’s scene time-signature change automatically; set their pattern length to 14 steps for the Fracture, or play the Fracture from the Drum Rack.
Related
- Halftime IDM — the genre this blueprint belongs to; Halftime and footwork, IDM and glitch, Neurofunk, Drum and bass, Ambient, Experimental and concrete
- IDM track — the full-IDM blueprint next to this one; Halftime track — the dancefloor halftime blueprint this page avoids repeating; Famous halftime and 140 tracks — real records of the lineage, analysed; DnB track, Ambient track
- Glitch and IDM sounds, Breakbeat chopping, Sub bass, Snare and clap, Pads and atmospheres, FX, risers and impacts, Textures, foley and noise, Generative sounds
- Granular rack, Resampling rack, MIDI generator rack, Performance rack, Modular hybrid rack
- Resampling workflow, Spectral processing, Multiband sidechain, Automation and modulation, Performance and live
- MIDI tools, Operator, Meld, Roar and saturation, Sampler, Simpler and Drum Sampler, Racks and macros, Hardware and modular integration
- BPM to ms, Note to Hz