ABLETON 12 SOUND DESIGN ATLAS

IDM Track — Programmed Breaks, Generative Melody & Detuned Pads Deconstruction

A 144-bar archetypal IDM track at 116 BPM in D Dorian: a hand-programmed break that is resampled through three generations, a Seed-generated melody that mutates eight bars at a time, a detuned Drift pad with tape wow and flutter, bit-crushed punctuation, a 16-bar 7/8 section and a closing tempo glide to 87 BPM. Built element by element in Live 12, then rebuilt as a Session-view set where Follow Actions do the mutating.

Difficulty
Intermediate
Live edition
Suite
Max for Live
In some recipes

The blueprint is a 144-bar track at 116 BPM in D Dorian, 4 minutes 56 seconds, written as an archetype of late-90s to mid-2000s IDM rather than a copy of any record. Elements: a drum source of Drum Sampler hits and your own break sliced in Simpler, hand-programmed at 1/32 and 1/64 and then resampled twice; a kick and a sine sub that never move; hats and percussion from the Rhythm generator with per-note chance; Euclidean percussion for a 16-bar 7/8 section; bit-crushed punctuation hits; a wandering FM bass from the Shape generator; a Seed-generated melody with probability groups; a detuned Drift pad pushed through a stock-device tape wobble; a Granulator III cloud made from that pad; Spectral Resonator turning the drums into the chord; and a tempo glide from 116 to 87 BPM at the end. Three decisions make it work: (1) nothing is written twice — every section is the previous section with one or two things changed (a new seed for two beats, a drum generation, a meter), so the form is a chain of mutations, not verse and chorus; (2) the chaos sits on a rigid floor — the kick, the sub and the pad chord change slowly and predictably, and they are the only things that do; (3) the drums are the lead in the loudest section — the melody leaves for the 32-bar drill section and comes back changed, the inverted club form the IDM & Glitch genre page describes.

Tempo
116 BPM for bars 1–136: a beat is 517 ms, a bar of 4/4 2069 ms, an 1/8 259 ms, an 1/16 129 ms, a 1/32 65 ms, a 1/64 32 ms, an 1/8 triplet 172 ms, a dotted 1/8 388 ms. Bars 137–144 glide linearly to 87 BPM (a 3:4 ratio), so the straight 1/16 at the end (172 ms) equals the 1/8 triplet at the start
Meter
4/4, except bars 57–72 in 7/8 (14 sixteenths, 1810 ms per bar)
Key
D Dorian (D minor with B natural). Sub on D1 (73.4 Hz) and G0 (49.0 Hz); FM bass D2–A2 (147–220 Hz); pad Dm9 and G9 voiced D2–A3; melody D3–D4 (294–587 Hz), Live note names with C3 as middle C
Length
120 bars of 4/4 at 116 (248.3 s) + 16 bars of 7/8 (29.0 s) + 8 bars gliding 116 → 87 (19.0 s) = 296.3 s ≈ 4:56. 16 bars of 4/4 = 33.1 s
Groove
No swing on kick and sub. Hats and edits use a hand-made asymmetric groove (see Groove & programming on the genre page) at 60% Timing; the melody stays straight
Loudness
About −11 LUFS integrated, −8 short-term in the drill section, −18 in the theme; −1 dBTP ceiling because clicks overshoot between samples
Mood
Tender melody, nervous machinery. Something mutates every 8 bars; nothing returns unchanged.

Where the archetype comes from

This page invents a track, so most of what follows is the page’s own recipe. The traits it is built on are a mix of documented statements and listening:

Named records and what is documented about each are on the planned Famous IDM tracks page. A slower, heavier relative of this blueprint is the planned Halftime IDM track.

Arrangement

Page recipe. The theme (bars 1–16, 33 s) is pad and seed-A melody alone, with the granular cloud swelling in from bar 9. Beat A (17–40) adds generation-1 drums: kick and hats at 17, the snare and rim at 25 with the sub, and the first Beat Repeat edits fading in at 33. The melody is a different clip every 8 bars (A1 to A4), each a small mutation of the last. The Mutation section (41–56) swaps the drums to generation 2, brings in the FM bass and crush hits, and reseeds two beats of the melody at a time until little of seed A is left. Bars 57–72 drop a sixteenth from every half-bar into 7/8, with Euclidean percussion over 14 steps and the sub thinned. The tape break (73–88) removes kick and sub, freezes the pad into Granulator III, and routes the drums into Spectral Resonator so they ring on the chord. Drill (89–120) is generation-3 drums at full density with the FM bass and crush hits and no melody: the peak. The Return (121–136) halves the drums and brings back a melody that is seed A again with the mutations kept. The last 8 bars glide from 116 to 87 BPM while everything thins out.

Energy curve

Page recipe. Read the three lanes together. Energy climbs in steps of one per section until the tape break, which is the reset; the drill section is two steps above anything before it. Harmonic clarity runs against density, so the listener always has one thing to hold: melody when the drums are simple, drums when the melody is gone.

Mutation map

Transitions

Four bar-level moves carry the form. Each grid is the last bar before the change and the first bar after it.

The 8-bar glide at the end needs no grid: draw a straight tempo ramp on the Main track from 116 at bar 137 to 87 at bar 145. Warped clips follow the tempo; the one unwarped audio clip, the captured pad, drops in pitch by up to a fourth, which is the effect. Details under meter and tempo.

Frequency layering

Page recipe. The genre page’s rule holds: IDM is full-band and bright above 2 kHz. What this track adds is a schedule. The pad and the melody share 300 Hz–3 kHz and are kept apart by register (pad below A3, melody above D3, with one shared fifth) and by a 3 dB dip at 800 Hz in the pad. The crush hits alias into the 1–3 kHz band, so they are only allowed when the melody is absent or thinned (bars 41–56, 65–72, 89–120). Below 120 Hz only the kick and sub exist, and both are mono.

Element by element

The source beat, generation 1 (Drum Sampler kit + your own break in Simpler Slice)

Instrument: Drum Rack, Simpler, Drum Sampler · Level: intermediate · Genres: idm, braindance, drill-n-bass

Quick start

Load
Simpler, Drum Rack, Drum Sampler, Drum Buss
Set
  • Simpler a two-bar break warped to 116, Slice by Beat at 1/16, Fade 1 ms, then Slice to Drum Rack
  • Drum Sampler layers inside the kick and snare pads: short sine kick Decay 180 ms, tight snare Decay 140 ms
  • Pattern no two bars of four identical, but bar 1 of every four the same
  • Ghosts Velocity Deviation −20, Chance 85%; kick and backbeat at 100%
  • Drum Buss Drive 10%, Transients +20%, Boom off
You should hear
A plain break that grooves on its own, with dependable kick and snare hits and ghost notes that shift slightly every pass.
Live edition
Standard and up

Generation 1 is a good, plain beat: a sliced break of your own playing (or a cleared break) with Drum Sampler one-shots layered on the kick and snare slices. Slicing and the 1/64 hand-edit method are on the genre page (hand-programmed break) and in Breakbeat chopping; here are the choices for this track.

  1. Record or choose a two-bar break near 100–120 BPM; warp it to 116 and slice by Beat at 1/16 so pad n is sixteenth n.
  2. Slice to a Drum Rack. On the kick and snare pads, add a Drum Sampler chain inside the pad: a short sine kick (Decay 180 ms) and a tight snare one-shot (Decay 140 ms), so the break’s weak hits become dependable.
  3. Program the pattern below by hand. Rule: no two bars of four are identical, but bar 1 of every four is the same, so the ear has an anchor.
  4. Set Velocity Deviation on all ghost notes to −20 and Chance 85% in the Chance Editor; leave kick and backbeat at 100% chance.
Generation 1 must groove on its own, because generations 2 and 3 are made from it. A beat that only works with effects falls apart when it is resampled and chopped.

Kick: short, mono, the one fixed point (Drum Sampler)

Instrument: Drum Sampler · Level: essential · Genres: idm, electro, braindance

Quick start

Load
Drum Sampler, Saturator, EQ Eight, Utility
Set
  • Drum Sampler sine-ish kick, Pitch tuned to a 55 Hz knock, Decay 180 ms, Punch effect 30%
  • Saturator Analog Clip, Drive 3 dB
  • EQ Eight HP 30 (12 dB/oct), bell −3 dB 350 Hz Q 1.4
  • Utility Mono, Gain −2 dB
  • Edits kept out of every Beat Repeat and resample pass
You should hear
A short, mono kick that stays fixed while everything around it mutates.
Live edition
Standard and up

The kick plays the same two-bar pattern for the whole track except the 7/8 section and the half-time return. It is short (180 ms) and tuned to a 55 Hz knock so the D1 sub sits above it rather than on it.

Keep the kick outside every Beat Repeat and resample pass: it is a separate Drum Rack pad muted on the edit buses. Edits on the kick read as a broken track, not as IDM.

Snare and rim ratchets (Ornament flams, Time Warp, per-hit pitch)

Instrument: Drum Rack · Level: advanced · Genres: idm, drill-n-bass, breakcore

Quick start

Load
Drum Rack, Saturator
Set
  • Roll eight 1/32 snare hits across beat 4 of bar 4
  • Time Warp one breakpoint at the middle (Breakpoint Time 50%), Speed 160%, so the hits crowd into the downbeat
  • Ornament Flam, 1/64 early, flam velocity 60%
  • Pads snare duplicated at +1, +2 and +3 st; the last four hits moved onto them
  • Saturator Hard Curve 4 dB
You should hear
A snare roll that accelerates into the backbeat, flammed so it sounds played, climbing in pitch as it goes.
Live edition
Intro and up

The snare fills are written with two Live 12 transformations rather than drawn note by note: Ornament adds flams and grace notes, Time Warp makes a run of evenly spaced hits accelerate into the backbeat. Pitch rises come from the pad’s transpose, written per hit.

  1. Draw eight 1/32 snare hits across beat 4 of bar 4 (eight hits in 517 ms, 65 ms apart).
  2. Select them and apply Time Warp: one breakpoint at the middle with Speed above 100%, so the first half spreads and the second half crowds into the next downbeat.
  3. Apply Ornament: Flam with a 1/64 position (32 ms) and lower flam velocity. Flams on a roll make it sound played rather than ratcheted.
  4. Duplicate the snare pad three times at +1, +2 and +3 semitones and move the last four hits onto those pads: the classic climbing roll.
Rolls faster than about 16 ms between hits fuse into a tone. At 116 a 1/128 is 16 ms: use it for a buzz on purpose, never by accident from Time Warp crowding.

Hats from the Rhythm generator, kept alive by Chance and a Follow Action bank

Instrument: Drum Rack · Level: intermediate · Genres: idm, glitch, minimal

Quick start

Load
Drum Rack, Velocity, EQ Eight
Set
  • Rhythm generator Steps 16, Density 60%, Step Duration 1/16, Accent 40%, Accent Frequency 3
  • Bank four related clips, each generated again with Density nudged
  • Play One a closed and an open hat on the same step, grouped
  • Follow Actions A Other at 70%, B Play Again at 30%, Linked, one loop
  • Velocity Random 15; EQ Eight HP 4 kHz (48 dB/oct)
You should hear
Hats with a 3-against-4 accent that never repeat a bar exactly.
Live edition
Standard and up

The hats never repeat a bar exactly. They are generated once, then three layers of chance keep them moving: per-note probability, Play One groups for open/closed alternatives, and a bank of four clips that pick each other with Follow Actions.

  1. On an empty 2-bar hat clip, open the Rhythm generator: Steps 16, Density 60%, Step Duration 1/16, Accent 40% with an Accent Frequency of 3 — accents every three sixteenths, a 3-against-4 cross-rhythm.
  2. Generate until one result grooves. Then duplicate the clip three times and press Generate again in each with Shift and Density nudged; you now have four related clips.
  3. In each clip, put a closed and an open hat on the same step and make them a Play One group, so one of the two plays each pass.
  4. Follow Actions on all four clips: Action A Other at 70%, Action B Play Again at 30%, Linked, one loop. The bank picks a new clip every two bars, except when Play Again (30%) repeats the current one.
Follow Actions only run in Session view. Record the bank into the Arrangement for the length of the section and keep the take; the mutation engine below does this for the whole track.

The 7/8 section: Euclidean percussion over 14 steps

Instrument: Drum Rack, Euclidean generator · Level: intermediate · Genres: idm, autechre-style, math rock

Quick start

Load
Drum Rack, Corpus, EQ Eight
Set
  • Meter 7/8 marker at bar 57, 4/4 at bar 73; clips set to 7/8 too
  • Euclidean Steps 14, Division 1/16, voice 1 Density 5 (rim), voice 2 Density 3 (tom), Rotation 2 on voice 2
  • Drum Rack rim, tuned tom on A, metal tick
  • Corpus Beam, Tune D, Decay 25%, Dry/Wet 20%
  • EQ Eight HP 180 Hz
You should hear
Pitched, in-key percussion born in 7/8, with every bar losing its last eighth.
Live edition
Standard and up

For 16 bars every bar loses its last eighth. The kick and snare are edited from generation 1; the new percussion is generated by Euclidean on a 14-step clip so it is born in the meter instead of cut down to it. Polymeter in 4/4 is on the genre page (generative polyrhythm); here the cycle is the bar.

  1. Put a time signature marker of 7/8 at bar 57 and a 4/4 marker at bar 73 in the Arrangement’s scrub area.
  2. Make the clips 7/8 too (set the clip signature in the clip’s properties) so their bars line up with the song bars.
  3. Corpus at 20% tuned to D on the rim and tom gives the generated hits a pitch, so they belong to the key.
Session clips loop by their own length; a 4/4 hat clip will drift against 7/8 bars. Either make a 14-step version of each hat clip, or let it drift for 16 bars deliberately and cut it at bar 73.

Generations 2 and 3: resample, hand-edit, resample again

Workflow: Resampling, Beat Repeat · Level: advanced · Genres: idm, glitch, drill-n-bass

Quick start

Load
Beat Repeat, Roar
Set
  • Second generation Beat Repeat Interval 1 bar, Offset 3/4, Chance 25%, Grid 1/16, Pitch −5, Pitch Decay 30%; bounce 32 bars
  • Hand edits keep the best 8, chop at 1/16, reverse every fifth slice, 1 ms fades
  • Third generation a second Beat Repeat in Gate mode, Grid 1/64, Chance 15%
  • Roar Single, Shards, Drive 6 dB; bounce again
  • Arrangement gen 1 in Beat A, gen 2 in Mutation, gen 3 only in Drill
You should hear
The same drummer getting worse: each audio generation more broken and buzzing than the last.
Live edition
Suite

The track’s drums exist as three audio generations, each made from the one before. The resample-and-destroy loop is taught on the genre page (resample-and-destroy cycle) and the sound page (resampling cascades); what this track adds is a fixed rule for what each generation is allowed to change.

  1. Generation 2: run generation 1 through Beat Repeat with Offset 3/4 so repeats only start on beat 4, and bounce 32 bars. Keep the best 8, chop at 1/16, reverse every fifth slice, re-order two bars by hand.
  2. Generation 3: run generation 2 through a second Beat Repeat in Gate mode at 1/64 (32 ms, which reads as a 31 Hz buzz) and Roar in Single mode; bounce again.
  3. Arrange: gen 1 in Beat A, gen 2 in Mutation and the second half of the tape break, gen 3 only in Drill. The ear hears the same drummer getting worse, which is the point.
Label every bounced clip with its generation and the date. After a week you will not hear which is which, and the arrangement depends on it.

Bit-crushed punctuation (a Drum Rack of crush fragments fired by chance)

Instrument: Drum Rack, Redux, Roar · Level: intermediate · Genres: idm, glitch, clicks and cuts

Quick start

Load
Drum Rack, Simpler, Redux, Roar, Erosion
Set
  • Pads 1–4 Simpler, 30–90 ms fragments of gen 2; Redux Rate 7 kHz, Jitter 25%, Bits 6
  • Pads 5–6 reversed pad-tail fragments; Roar Single, Bit Crusher, Drive 10 dB; Auto Filter BP 2 kHz
  • Pads 7–8 Drum Sampler noise tick, Decay 15 ms; Erosion Sine 5 kHz, 40%
  • Clip sparse, low per-note chance
  • Mix on its own track, muted per section and ducked under the melody
You should hear
Short bit-crushed fragments popping up by chance as their own instrument, never smeared over the drum bus.
Live edition
Suite

The glitches are not effects on the mix; they are a separate instrument. Eight fragments cut from crushed resamples sit on Drum Rack pads, and a sparse clip with low per-note chance fires them. Redux and Erosion settings are on the sound page (Redux and Erosion).

As a separate instrument the glitches can be mixed, muted per section and ducked under the melody. Glitch inserted on the drum bus can do none of that.

Sine sub that never moves (Operator)

Instrument: Operator · Level: essential · Genres: idm, electro, ambient

Quick start

Load
Operator, EQ Eight, Utility, Compressor
Set
  • Operator Osc A sine, mono, no glide
  • Notes D1 for the Dm9 bars, G0 for the G9 bars, one long note per chord
  • EQ Eight LP 110 Hz (48 dB/oct)
  • Utility Mono
  • Compressor sidechain from the kick, 4 dB, attack 0.1 ms, release 60 ms
You should hear
A steady sine floor that never moves while everything above it mutates.
Live edition
Suite

D1 for the Dm9 bars, G0 for the G9 bars, one long note per chord. Everything above it mutates; the sub is the floor, as the genre page insists.

Wandering FM bass (Shape generator, Glissando, Operator)

Instrument: Operator · Level: intermediate · Genres: idm, braindance, acid

Quick start

Load
Scale, Operator, Saturator, EQ Eight
Set
  • Shape generator 2-bar clip in D Dorian, ramp-like preset, Min D2, Max A2, Rate 1/16, Density 55%, Jitter 30%
  • Glissando on three adjacent notes; the rest staccato
  • Operator Osc A sine carrier, Osc B ratio 2 modulating it, 220 ms decay
  • Saturator Soft Sine 4 dB
  • EQ Eight HP 120 Hz (48 dB/oct)
You should hear
A short, rubbery bass that wanders inside the chord like a drawn curve, each note a quick FM bite then a round body.
Live edition
Suite

A short, rubbery bass that wanders inside the chord an octave above the sub. Its contour comes from the Shape generator, so it moves like a drawn curve; Glissando slides a few notes into each other.

  1. On a 2-bar clip with the clip scale set to D Dorian, run Shape with a ramp-like preset, Min D2, Max A2, Rate 1/16, Density 55% and Jitter 30%. Shape is monophonic, which suits a bass.
  2. Pick three adjacent notes and apply Glissando so they slide. Keep the rest staccato.
  3. Operator: Osc A sine carrier, Osc B ratio 2 modulating it with a 220 ms decay, so every note has a short FM bite and then a round body.
  4. Regenerate Shape each 8 bars in the Mutation section with only Jitter changed, so the contour stays recognisable.

Generative melody: Seed in D Dorian, Play One groups, mutation by partial reseeding

Instrument: Operator, Seed generator · Level: intermediate · Genres: idm, braindance, ambient

Quick start

Load
Operator, Delay, Hybrid Reverb
Set
  • Seed generator D Dorian, Pitch D3 to D4, one voice, Density about 45%, durations 1/16 to 1/4
  • Curate delete one note in four, lengthen the peak, move one note off the beat
  • Play One three spots with two stacked alternatives each
  • Delay 3/16 ping-pong, Feedback 35%, 20% wet; Hybrid Reverb Quartz, 2.2 s, 18%
  • Mutations one per 8 bars; reseed only a two-beat time selection
You should hear
A generated bell line that stays recognisable while it changes in small steps, always inside D Dorian.
Live edition
Suite

The melody is generated, then curated, then mutated in small steps. The FM bell patch is on the genre page (sincere FM bell); here is how the line is made and how it changes across the track.

  1. Set the clip scale to D Dorian, select an empty 2-bar clip and run Seed: Pitch range D3 to D4, one voice, Density about 45%, durations 1/16 to 1/4. Generate until a line has one clear peak note; that is seed A.
  2. Curate by hand: delete one note in four, lengthen the peak, and move one note off the beat.
  3. Pick three spots and stack two alternatives with the original, then group each stack as Play One in the Chance Editor. The line now has 27 possible versions, all close to seed A.
  4. Mutations, one per 8 bars: A1 raises Velocity Deviation; A2 is Recombine on the Pitch dimension, Rotate by 1; A3 shortens every note by half; B reruns Seed on a time selection of just two beats, then two more, until bar 56.
  5. For the Return, rebuild A+: seed A with every mutation you liked folded back in by hand.
Seed works inside the clip scale, so every regenerated beat stays in D Dorian. Reseeding only a time selection is what turns random generation into gradual mutation: the listener tracks the kept beats and hears the new ones as variations.

Detuned pad with tape wow and flutter (Drift, two Delays in Repitch, LFO)

Instrument: Drift · Level: intermediate · Genres: idm, boards-style, ambient

Quick start

Load
Drift, Delay, LFO, Vinyl Distortion
Set
  • Drift Osc 1 Saw, Osc 2 Saw +9 ct, Drift 40%, Voice Mode Stereo, LP 1.8 kHz, Env 1 A 600 ms
  • Wow Delay Repitch, sync off, 12 ms, Feedback 0%, Dry/Wet 100%, Mod Rate 0.6 Hz, about ±15 cents
  • Flutter second Delay Repitch, 4 ms, Mod Rate 7 Hz, a few cents
  • LFO Stray, 0.15 Hz, Jitter 40% → wow Mod Rate 0.3–0.9 Hz
  • Vinyl Distortion Tracing 10%, Pinch off
You should hear
A warm detuned pad that wobbles like stretched tape, its wow speed wandering like a worn capstan.
Live edition
Standard and up

A warm Drift pad on Dm9 and G9, made to wobble like a stretched tape with stock devices only: two Delays in Repitch mode with their delay time modulated, one slow (wow) and one fast (flutter). The degraded Wavetable pad on the genre page uses Redux; this one is about pitch instability. The tape background is on Tape, lo-fi and analog character.

  1. Drift: two saws, Osc 2 detuned about +9 cents, the Drift control up to 40% for per-voice instability, Voice Mode Stereo for a detuned left-right pair. Low-pass around 1.8 kHz; slow attack.
  2. Wow: Delay in Repitch mode, sync off, 12 ms on both sides, Feedback 0, Dry/Wet 100%. Raise the Time modulation amount until a held note waves by roughly ±15 cents at 0.6 Hz. Check against Tuner on a sustained sine.
  3. Flutter: a second Delay at 4 ms with Rate 7 Hz and only a few cents of depth. It should be felt as roughness, not heard as vibrato.
  4. LFO (Max for Live) in Stray mode with Jitter mapped to the wow Delay’s Mod Rate, between 0.3 and 0.9 Hz, so the wow speed wanders like a worn capstan.
  5. In the tape break, automate both modulation depths to double. Then capture 16 bars of the pad to audio for Granulator III.
Two Repitch delays add about 16 ms of latency to the pad. That is harmless on a pad, but put the melody on a different track or its notes will feel late against the drums.

Granulator III cloud from the captured pad

Instrument: Granulator III · Level: intermediate · Genres: idm, ambient, microsound

Quick start

Load
Granulator III, LFO, Auto Filter, Hybrid Reverb
Set
  • Granulator III the captured pad, Cloud mode, Grain Size 90 ms, Density high, Variation 25%, Scan 0.1
  • Position automated 20% → 70% over 16 bars
  • LFO Random, 1/2, → Position ±5%
  • Auto Filter BP 1.2 kHz, Q 0.7; Hybrid Reverb Dark Hall 6 s, 35%
  • Notes long notes on D and G
You should hear
The same harmony as a different material: the pad frozen and scattered into a crawling cloud.
Live edition
Suite
Max for Live
Needed

The tape break replaces the live pad with 16 bars of its own audio, frozen and scattered in Granulator III’s Cloud mode. It is the same harmony as a different material. Granular pad basics are in Pads and atmospheres and the Granular rack.

  1. Drop the captured pad audio into Granulator III. Cloud mode gives many unsynchronised grains, the right choice for a drone-like bed.
  2. Grain Size near 90 ms, Density high, Variation about 25% for scatter. Scan low (0.1) so playback crawls.
  3. Automate Position from 20% to 70% across the 16 bars; an LFO in Random mode adds ±5% so it never sits still.
  4. Play long notes on D and G from the pad’s MIDI; Granulator III is an instrument and transposes the grains.

Spectral Resonator: the drums play the chord in the tape break

Device: Spectral Resonator · Level: advanced · Genres: idm, glitch, ambient

Quick start

Load
EQ Eight, Spectral Resonator, Spectral Time, Limiter
Set
  • Source gen 2 drums, no kick; EQ Eight HP 200 Hz
  • Spectral Resonator MIDI, Poly, sidechain from the Pad MIDI, Mod Wander, Unison 2, Dry/Wet 55%
  • Decay automated from 150 ms to 600 ms across the break
  • Spectral Time Delay 3/16, 20%
  • Limiter −3 dB
You should hear
The drums ringing at the pad's chord instead of their own pitch, from pitched clicks to an overlapping chord.
Live edition
Suite

With the kick and sub gone, generation 2 drums run through Spectral Resonator in MIDI mode, tuned by the pad’s chord clip. Each hit rings at Dm9 or G9 instead of at its own pitch. Setup is on Spectral processing; here are the settings that keep the drums readable.

Decay sets how long a hit rings. At 500 ms a hit lasts about a beat at 116, so consecutive hits overlap into a chord; at 150 ms they stay as pitched clicks. Automate Decay from 150 ms to 600 ms across the break.

The mutation engine: Session banks, Follow Actions, recorded into the Arrangement

Workflow: Session view, Follow Actions · Level: intermediate · Genres: idm, generative, live electronics

The arrangement is made by letting a Session set play itself and recording it, then editing. Each track has a bank of clips that are mutations of each other, and Follow Actions choose among them with set odds. The general method is on Generative sounds; the odds below are this track’s.

Track bankClipsFollow Action A / BTimeEffect
Hats4 Rhythm variantsOther 70% / Play Again 30%Linked, 1 loop (2 bars)Never the same hat clip twice in a row
MelodyA, A1, A2, A3Next 85% / Play Again 15%Unlinked, 8 barsMostly in order, sometimes lingers
Edits (gen 2/3)8 two-bar audio clipsAny 60% / Jump to clip 1 40%Linked, 1 loopChaos that keeps returning to a home bar
Crush hits2 clips + 1 emptyOther 100%Unlinked, 4 barsGlitches come and go in 4-bar blocks
Scenes8 sectionsNext 100%Section lengthThe form advances by itself
Scene Follow Actions take precedence over clip Follow Actions once they fire, so a scene change always resets the banks to their first clip. Put the home clip of each bank in the scene’s row.

Meter and tempo moves (time signature markers, Main tempo ramp, tape stop)

Workflow: Arrangement automation · Level: intermediate · Genres: idm, experimental, ambient

Two structural changes need the Arrangement: the 7/8 block (time signature markers at bars 57 and 73) and the closing glide (tempo automation on the Main track). A third, the tape stop into the drill, is a clip edit.

  1. Time signatures: right-click the scrub area at bar 57, insert a 7/8 marker; at bar 73, a 4/4 marker.
  2. Glide: on the Main track, show Song Tempo automation, set a breakpoint of 116 at bar 137 and 87 at bar 145, and connect them with a straight line.
  3. Tape stop: consolidate the pad’s bar 88, set the clip to Re-Pitch warp mode, and draw a falling tempo ramp with warp markers across beats 3–4, or use the clip’s transpose envelope from 0 to −24 st.
The glide changes the pitch of every unwarped clip and the length of every unsynced delay. Warp all drum audio, set delays to synced times, and leave only the captured pad unwarped so it is the one thing that sags.

Mix decisions

Sidechain map

SourceDestinationDeviceAmountWhy
KickSubCompressor, external sidechain4 dB, release 60 msTwo low things never peak together
MelodyFM bassCompressor, external sidechain3 dB, release 150 msBars 41–56 only, where they overlap
MelodyCrush hits busCompressor, external sidechain6 dB, release 200 msGlitches step back when the melody speaks
Drums (gen bus)Reverb and delay returnsCompressor on returns4 dBSpace between hits, not on them

EQ carving

Bus structure

Width per element

ElementWidthHow
Kick, subMonoUtility Mono
FM bassMono below 200 HzUtility Bass Mono 200 Hz
Generation drumsPer hitDrum Rack chain pan; Auto Pan-Tremolo on hats only
Crush hitsWide, every pad differentChain pan ±20 to ±80
Pad120%Drift Stereo mode plus Utility Width
MelodyCentre, ping-pong echo wideDry mono; Delay ping-pong on the send
Granular cloud140%Utility Width; check mono

Build it yourself in 10 steps

  1. 116 BPM, clip scale D Dorian. Build the Drift pad on Dm9 and G9 (four bars each) and add the two Repitch Delays for wow and flutter. Play it for a minute; it should already feel nostalgic.
  2. Generate seed A with Seed (D3–D4, one voice, 45% density); curate by hand; add three Play One groups.
  3. Program generation 1 drums from your own sliced break plus Drum Sampler layers; kick on its own pad and outside every effect.
  4. Hats: Rhythm generator with Accent Frequency 3; four variants; Follow Actions Other 70% / Play Again 30%.
  5. Sine sub on D1/G0, LP 110 Hz, ducked 4 dB by the kick. FM bass from the Shape generator, D2–A2, HP 120 Hz.
  6. Make generation 2 (Beat Repeat on beat 4, bounce, reverse every fifth slice) and generation 3 (Gate mode 1/64, Roar, bounce).
  7. Build the crush-hit Drum Rack from fragments of generation 2; write a sparse clip with 20–50% chance per note.
  8. Make melody mutations A1–A3 and B by changing one thing per 8 bars and reseeding two beats at a time.
  9. Set up Session banks and scene Follow Actions, record three takes into the Arrangement, keep the best runs. Add the 7/8 markers at 57 and 73, the Spectral Resonator break at 73–88 and the tempo ramp at 137–145.
  10. Mix: kick and sub mono and untouched, warmth on the music bus only, Limiter at −1 dBTP, about −11 LUFS integrated. Check in mono: the per-hit panning must not cancel the snare.

Variations

VariationWhat changes
Halftime IDMTempo 85 (or 170 felt half), snare on beat 3, sub heavier and longer, generation 3 used for fills only. See the planned Halftime IDM track and Halftime IDM.
Drill-n-bassTempo 168, the generation-1 break played at full speed with 1/64 snare rushes everywhere, a jazzier chord (Dm11, G13), melody replaced by a bass solo. See Jungle track for the break handling.
Boards-style downtempoTempo 92, generation 1 only, double the wow depth, Redux at 12 bits on the whole music bus, melody on a detuned sampled instrument. Fewer mutations: one every 16 bars.
Rule-based / Autechre-adjacentNo melody; the Euclidean section runs the whole track with clip lengths of 13, 11 and 7 steps; Spectral Resonator tuned to a static D; the form is one 20-minute Session take edited down.
MicrotonalLoad a tuning system in Live 12 (for example a 7-limit just intonation scale on D) so the pad’s Dm9 beats less and the melody’s B sits flatter. See Tuning, scales and MPE.
Ambient editRemove kick, sub and generation 2/3; keep pad, melody, granular cloud and the Spectral Resonator drums at −12 dB. See Ambient track.

Live performance version

IDM played live is mostly about letting processes run and steering them, so the Session set is the mutation engine above with hands on the odds. Generations 2 and 3 are prepared audio; generation 1, the melody banks, the hats and the crush hits are live MIDI, so their chance settings and seeds can change on stage.

Scenes

SceneBlueprint barsPlayingManual move
1 Theme1–16Pad, melody A, granular from 9Wow depth macro
2 Beat A17–40+ gen 1, hat bank, sub from 25Press Generate on the hat clip between loops
3 Mutation41–56Gen 2, FM bass, crush hits, melody B bankReseed two beats of melody live; Crush macro
4 7/857–7214-step clips, Euclid percEuclidean Rotation on an encoder
5 Tape break73–88Granular cloud, spectral drumsSpectral Decay and Freeze
6 Drill89–120Gen 3 bank, FM bass, crush hitsStutter macro; edit bank odds
7 Return121–136Melody A+, gen 2 half, padMelody Play One groups on
8 Glide137–144Pad, thin melody, granularTempo encoder from 116 to 87 by hand
In Session view the 7/8 scene needs 14-step clips on every track that plays in it, because the Session has no time signature markers. Set the scene’s own time signature in its properties so its clips launch on 7/8 bars.

Performance rack

Push mapping

Hardware integration

Related