Famous Acid House & Acid Techno Records — How They Were Made
Thirteen records built on the Roland TB-303 or its descendants, from Charanjit Singh’s 1982 raga experiment and the Chicago tapes of 1986–87 to Hardfloor, Josh Wink, London’s free-party acid techno and the modern I Love Acid and Acid Test scenes. For each one: what is documented about how it was made, what is only heard, and how to rebuild the technique in Live 12.
- Difficulty
- Intermediate
- Live edition
- Suite
- Max for Live
- Not needed
Acid is the sound of a failed product. Roland built the TB-303 in 1981 to stand in for a bass player, it sold badly, and it was gone within about two years. Cheap second-hand units then reached people who had no manual they could read and no idea what the machine was “for”. Nearly every record on this page comes from that mismatch: a filter turned by hand while a pattern loops, a preset that reappeared when the batteries came out, a raga played through the slide function, a mixer channel pushed until it broke up. This page analyses thirteen records from 1982 to 2019. Each claim is labelled Documented (an interview, a label credit, a release note or a reputable feature, linked inline) or By ear (listening analysis or widely held scene knowledge, which is not fact). The Live 12 recipes recreate the technique, not the record. No melodies are transcribed. The ≤2-bar rolls are generic shapes that show a rhythmic or filter idea.
Overview: the thirteen records
| Record | Year | Artist | Era | Signature technique |
|---|---|---|---|---|
| Synthesizing: Ten Ragas to a Disco Beat | 1982 | Charanjit Singh | Proto-acid / Bombay | 303 slide used for raga melody, synced to an 808 and a Jupiter-8 |
| I’ve Lost Control | 1986 | Sleezy D. | Chicago / Trax | First acid line on vinyl, two long versions of one jam |
| No Way Back | 1986 | Adonis | Chicago / Trax | A 303 bass ostinato under a stripped house track |
| Acid Tracks | 1987 | Phuture | Chicago / Trax | Knobs turned live while the pattern loops, recorded to cassette |
| Land of Confusion | 1987 | Armando | Chicago / Westbrook | A battery-reset preset, live-synced drums, two 303 sequences at once |
| Acperience 1 | 1992 | Hardfloor | German acid trance | Several 303s at once, long builds at 125 BPM |
| Turkish Bazar | 1994 | Emmanuel Top | French acid techno | One sweeping 303 line over punchy 909 kicks |
| Higher State of Consciousness | 1994–95 | Josh Wink | US acid / rave crossover | Distorted 303 build that never quite peaks, mixed hot and left bright |
| Hardcore Disco EP | 1994 | Hardcore Disco (Liberator circle) | London acid techno | Acid without a 303: a small FM synth and chopped breaks |
| Acid Legacy EP | 2003 | Ceephax Acid Crew | UK revival | Vintage Roland rig, short tracks, cassette as a production stage |
| Analord series | 2004–05 | AFX (Aphex Twin) | Analogue return | 303, 606/808/909 and an MC-4 sequencer instead of a computer |
| Neo Neo Acid | 2012 | Tin Man | Modern / Acid Test | A softened, mournful 303 over long, slow forms |
| Valvable | 2019 | Luke Vibert | Modern / I Love Acid | A whole album from three Roland boxes |
The records
Charanjit Singh — “Synthesizing: Ten Ragas to a Disco Beat” (1982): the slide as a raga instrument
Quick start
- Load
- Analog, Auto Filter, Overdrive, Echo
- Set
- Analog Saw, Mono, Glide 80–120 ms, Legato on; play C2–C4
- Notes overlapping neighbouring scale degrees, Scale mode on with the raga’s notes
- Auto Filter LP 24, cutoff about 1.5 kHz, Resonance 30–40%
- Overdrive Drive 15%
- Echo send 1/8 dotted, FB 30%
- You should hear
- A high, clear 303-style line that glides between scale notes far more than it steps, the slide carrying the melody.
- Live edition
- Suite
Why it matters. Documented: Singh recorded the album in 1982 at the His Master’s Voice studio in Bombay. He had bought his TB-303 in Singapore soon after it came out, and he synced the TR-808 and TB-303 to the Jupiter-8. The album flopped and was largely forgotten until its 2010 reissue, when critics heard it as acid house five years early (Wikipedia: Ten Ragas; catalogue numbers from Discogs: HMV pressing and Discogs: Bombay Connection reissue). It is the proto-acid case on this page. Nobody in Chicago heard it at the time, so it is a parallel invention, not an ancestor.
Documented tools and method: RA’s review of the reissue, crediting the critic Geeta Dayal, says Singh used the 303’s glide, “the ability to slide from one note to another”, to carry the raga melodies rather than as a bass machine, which the box handled poorly. The 808 supplies the disco rhythm and the Jupiter-8 adds long keyboard solos (RA review, 2010). By ear: the 303 sits in a melodic register, slides between scale notes far more often than any Chicago line, and the filter moves much less than it does in acid house.
Signature moves → Live 12
- Slide as ornament (Documented idea, recipe By ear). Build the 303 voice from the Analog recipe, but play it an octave or two higher (C2–C4) and set Glide to 80–120 ms with Legato on. Write overlapping notes between neighbouring scale degrees so most of the line glides. In a raga the movement between notes carries the expression, and the 303’s slide does that for you.
- Lock the notes to the raga (By ear). Turn on Scale mode in the clip and pick a scale with the raga’s notes. If your scale list does not have the one you need, enter the notes by hand and fold the piano roll to them. Keep the filter moderately open (Cutoff about 1.5 kHz, Resonance 30–40%) so the pitch stays clear.
- 808 disco under it (Documented: TR-808). Load an 808 kit in a Drum Rack. Four-on-the-floor kick, claps on 2 and 4, and 1/8 or 1/16 hats. Keep the swing at 0% (By ear: the record sounds straight, as synced machines of the time usually did).
- Polysynth solo layer (Documented: Jupiter-8). Use Analog with two saw oscillators, slight detune and Unison off, through an Arpeggiator (Rate 1/16, Style Up) or played by hand for solos. Return it to Echo for space.
What to steal: the 303’s weakest feature as a bass machine, its slide, becomes its strongest feature as a melodic voice. Play it high and let it glide.
Sleezy D. — “I’ve Lost Control” (1986): the first acid line on vinyl
Quick start
- Load
- Drift, Auto Filter, Saturator, Hybrid Reverb
- Set
- Drift 303 voice, Cutoff 300–500 Hz, Resonance about 55%, Decay 250 ms
- Auto Filter LP 400 Hz, Res 55%; moved only a little across the take
- Saturator Analog Clip, 4 dB
- Hybrid Reverb send Hall, 5 s, return cut below about 250 Hz
- Mixes one long take, then a dry drum-led mix and a heavily reverbed “space” mix
- You should hear
- A dark, narrow, insistent acid line whose tension comes from repetition, not sweeps.
- Live edition
- Suite
Why it matters. Documented: Attack Magazine calls it the first acid record to make it onto vinyl (Attack: TB-303 hardware focus). Wikipedia’s acid house article notes that it was released first, but that nobody can say which acid track was made first, since Phuture’s tape was already circulating (Wikipedia: Acid house).
Documented credits: the Trax 12" credits Sleezy D. and Virgo as producers, and Virgo for writing and instrumentation. The two sides are labelled “Space Side” and “House Side”, and both versions run about 10–12 minutes (Discogs: TX113). Virgo is one of Marshall Jefferson’s aliases (Wikipedia: Marshall Jefferson). By ear: a dark, insistent 303 line, a vocal of moans and the title phrase, heavy reverb on the “space” side, and very little else.
Signature moves → Live 12
- Two versions of one jam (Documented: Space and House sides). Record one long take of the 303 and drums. Then make two mixes from the same take: one dry and drum-led, one with the drums pulled back and the 303 and voice sent heavily to reverb. In Live, duplicate the tracks into a second set of Arrangement lanes, or keep one set and automate the send levels per section.
- A narrow, dark line (By ear). Start from the Drift recipe with Cutoff low (300–500 Hz), Resonance about 55% and Decay 250 ms. Move the cutoff only a little across the whole take. The tension comes from repetition, not sweeps.
- Voice as texture (By ear). Put a breathy vocal through Auto Filter (band-pass, 1 kHz), then Hybrid Reverb (Plate into Hall, 4–6 s decay, 40% wet on the space mix). No words beyond the hook.
What to steal: one take can become two records. Commit the performance, then make the arrangement in the mix.
Adonis — “No Way Back” (1986): the 303 as a plain bass ostinato
Quick start
- Load
- Analog, Operator, Compressor
- Set
- Pattern one-bar figure in A0–A1, accents on two or three syncopated steps, at most one slide
- Analog Cutoff around 700 Hz, Resonance 30%, Decay 400 ms
- Optional sub Operator sine an octave down at −12 dB, low-passed at 120 Hz, Mono
- Compressor sidechained from the vocal bus, 3:1, Attack 5 ms, Release 150 ms
- You should hear
- A 303 holding a plain, syncopated bass role with the knobs mostly still, leaving space for the voice.
- Live edition
- Suite
Why it matters. Documented: Attack names “No Way Back” among the earliest Chicago tracks to use the TB-303 (Attack). Wikipedia reports sales of more than 100,000 copies and calls it one of the most influential Chicago house tracks. It was No. 14 on Rolling Stone’s 2014 list of the best Chicago house records (Wikipedia: Adonis). The Trax 12" credits Adonis as producer and writer, with a vocal and an instrumental version (Discogs: TX112).
Documented tools: only the 303. Drum machine and studio are undocumented. By ear: unlike Phuture, the 303 is used here mostly as a bassline. It is a repeating, syncopated figure with modest filter movement, holding up a sparse track with a half-spoken vocal. This is the “before” picture: what the 303 sounded like just before people started playing its knobs.
Signature moves → Live 12
- Ostinato first (By ear). Write a one-bar 303 bass figure in the lower register (A0–A1), with accents on two or three syncopated steps and one slide per bar at most. Use the Analog recipe with Cutoff around 700 Hz, Resonance 30% and Decay 400 ms, so it reads as a bass part rather than a lead.
- Separate sub? Not needed here (By ear). In this era the 303 was the bass. If it is thin on a modern system, follow it with an Operator sine an octave down at −12 dB, low-passed at 120 Hz and set to Mono, rather than boosting the 303’s lows.
- Space for the voice (By ear). Keep the drums to kick, clap and one hat, and duck the 303 a few dB under the vocal phrases with a Compressor sidechained from the vocal bus (Ratio 3:1, Attack 5 ms, Release 150 ms).
What to steal: a 303 holding a bass role, with the knobs mostly still, is a style in its own right. Not every acid line has to scream.
Phuture — “Acid Tracks” (1987): the knobs as the instrument
Quick start
- Load
- Analog, Auto Filter, Overdrive, Drum Rack
- Set
- Analog Osc 1 Saw, Mono, Glide 60 ms, Legato
- Macros Cutoff 150 Hz → 4 kHz, Resonance 20 → 85%, Env Mod 0 → 80%, Decay on four knobs
- Overdrive Drive 20%, Tone 60%
- Take one looped pattern, a 10–15 minute automation pass, not edited afterwards
- Drums 707-style kit on separate chains, Activators toggled live
- You should hear
- One repeating pattern whose filter performance is the composition, opening and squelching as the drums drop in and out.
- Live edition
- Standard and up
Why it matters. It named the genre and is credited as the first record to make the 303’s filter the lead. Documented: Phuture were DJ Pierre (Nathan Jones), Spanky (Earl Smith Jr.) and Herb J (Herbert Jackson). Spanky bought a second-hand 303 for about $40 after Pierre heard one on a friend’s track. Nobody knew how to program it, so Pierre turned the knobs while Spanky’s beat ran, and Spanky told him, “Keep doing that, keep doing that.” They recorded the jam to cassette, about 15 minutes long, and gave the tape to Ron Hardy, who played it repeatedly at the Music Box until the crowd came round (RBMA Daily: DJ Pierre, 2012). The working title was “In Your Mind”. The drums came from a TR-707 and TR-727 pairing (Roland: Lifetime Achievement, DJ Pierre and Phuture). Bootleg tapes called it “Ron Hardy’s Acid Track”, which gave it its name. Marshall Jefferson produced the Trax version and had it slowed from about 130 to about 120 BPM (Wikipedia: Acid Tracks; Discogs: TX142).
Signature moves → Live 12
- Program once, then perform (Documented). Write one 303 pattern and loop it for the whole take. Map Cutoff, Resonance, Env Mod and Decay to four knobs on a controller, as in the Analog recipe, or play a TD-3 through External Instrument. Arm automation and record a 10–15 minute pass in Arrangement view. Do not edit it afterwards.
- Drop drums in and out live (Documented: Spanky dropping beats in and out). Split the 707-style kit into separate Drum Rack pads routed to their own chains. Map each chain’s Activator to a button and toggle them while you record. The mutes are part of the performance, just like the filter moves.
- Slow it down after (Documented: about 130 to about 120). If your jam feels rushed, change the set tempo before you bounce. With MIDI and a soft synth the sound will not change. With a recorded TD-3, use Complex Pro or simply re-record at the new tempo.
- 707 and 727 colour (Documented machines, sounds By ear). Use Live’s 707 and Latin percussion kits, or samples, in one Drum Rack: 707 kick and clap, with 727 congas, timbales or agogo filling the offbeats. Keep them dry and slightly saturated (Drum Buss Drive 10%, Crunch off).
What to steal: program the pattern, then spend your time on the knobs. In acid, the filter performance is the composition.
Armando — “Land of Confusion” (1987): a preset, a tape that was not erased, and two sequences at once
Quick start
- Load
- Drift, Roar, Glue Compressor
- Set
- Generate Seed in an empty 1-bar clip, Density about 70%, one octave; keep the one that unsettles you
- Two 303 tracks A loops 16 steps, B loops 12 or 14 steps, B +12 st
- Drift Mono, Glide 50 ms; Resonance 65–75%, Decay about 150 ms
- Roar Single, Soft Sine, Drive about 9 dB
- Glue Compressor 2:1, 10 ms
- You should hear
- A hard, driven acid line with a second loop drifting against it and lining up again every few bars.
- Live edition
- Suite
Why it matters. It is one of the hardest early Chicago acid tracks and was a club hit in Chicago and Britain (Wikipedia: Armando). Documented: 5 Magazine’s oral history gathers conflicting accounts. Mike Dunn says he recorded it at Bam Bam’s house. The track grew out of another tape (“Slave for Love”) that did not get erased while Armando was away. Dunn says the bassline was a 303 preset that came back when the batteries were taken out and put back, and he calls the record “a mistake”. The drums were synced so they played live. Paul Johnson says Armando ran two 303 sequences at once, a trick others copied later by syncing two 303s (5 Magazine: Armando Gallop, a life). The Westbrook 12" has three versions and thanks Ron Hardy, “from Armando & Bam Bam” (Discogs: AG-WB 4).
Signature moves → Live 12
- Accept the accident (Documented: the preset). Generate the line instead of writing it. Create an empty 1-bar MIDI clip, open the Generate panel and use Seed (Density about 70%, pitch range one octave) or Rhythm, then add accents with Velocity Shaper (see sequencing with MIDI tools). Regenerate until one pattern makes you uneasy, then stop and keep it.
- Two sequences at once (Documented: Paul Johnson). Use two 303 tracks. Track A loops a 16-step clip, and track B loops a clip of 12 or 14 steps (set its Loop Length to 3.0.0 or 3.2.0 in beats). The lines drift against each other and line up again every few bars. Detune B by +12 st or keep both in the same register and pan slightly apart.
- Live-synced drums (Documented). Run the drum machine as an instrument you play, not a finished loop: separate Drum Rack chains for kick, clap, hats and toms, each with an Activator on a button. Record the mutes as you go.
- Harder edge (By ear). Raise Resonance to 65–75% and Decay to about 150 ms, and drive the line with Roar (Single mode, Soft Sine shape, Drive about 9 dB, see Roar as a 303 distortion).
What to steal: some of the best acid lines were never written. Generate, keep the one that unsettles you, and let two loops of different length do the composing.
Hardfloor — “Acperience 1” (1992): several 303s at once, and the long build
Quick start
- Load
- Drift, Analog, Auto Filter, Pedal, EQ Eight
- Set
- Low 303 Drift Saw, Mono, Glide 40 ms; Auto Filter LP 24, 450 Hz, Res 40%
- Lead 303 Analog Rectangle, Mono, Glide 60 ms, Legato, an octave up; Auto Filter LP 12, Res 75%
- Pedal Distortion, Gain 50–60%, Bass −3 dB; EQ Eight HP 120 Hz
- Build cutoff ramp over 16–32 bars, resonance rising in the last 8 bars only
- Breakdown lead alone for 8–16 bars, Echo send 1/8 dotted, Feedback 45%
- You should hear
- A heavily distorted, screaming lead over a lower 303 bassline, its filter opening over a long build before the breakdown.
- Live edition
- Suite
Why it matters. It moved acid from Chicago jams into long, structured European trance and techno, and its 303 tones are among the most imitated. Documented: Hardfloor are Oliver Bondzio and Ramon Zenker. Their sound came from manipulating TB-303s, with up to six in use at once (Wikipedia: Hardfloor; Roland US also cites “up to six” and calls the track essential listening: Roland US blog). The German 12" lists tempos for all four parts (Acperience 1 at 125 BPM, 2 and 3 at 140, 4 at 148), runs “Acperience 1” at 8:57 and says it was recorded in Germany in January 1992 (Discogs: HH 008). The EP entered the UK chart at No. 56 in December 1992 (German Wikipedia: Hardfloor).
Documented tools: only the 303s. The number used on this track, the drum machines and the mixer are undocumented. By ear: a lead 303 with heavy distortion and very high resonance, a second, lower 303 line underneath, and builds that open the filter over many bars before a breakdown.
Signature moves → Live 12
- Layer 303s by role (Documented: multiple 303s; roles By ear). Use three tracks: a low 303 (Saw, Cutoff 300–600 Hz, Res 40%, no distortion) that works as a bassline, a lead 303 (Square, Res 70–80%, heavy drive) an octave up, and an optional answer line that plays only in builds. Each one gets its own pattern.
- The long open (By ear). Draw a slow cutoff ramp on the lead over 16–32 bars. At 125 BPM a bar is 1920 ms, so a 32-bar build lasts about a minute. Draw Resonance to rise in the last 8 bars only, so the squelch sharpens just before the breakdown.
- Distortion after the filter (By ear, standard practice). Lead chain: Auto Filter, then Pedal (Distortion, Gain 50–60%, Bass −3 dB) or a stack from distortion stacks, then EQ Eight high-passing at 120 Hz so the low 303 keeps the bottom.
- Breakdown on the lead alone (By ear). Cut the kick and the low 303 for 8–16 bars and leave only the lead with a long Echo send (1/8 dotted, Feedback 45%). Bring everything back on the downbeat.
What to steal: give each 303 one job, low, lead or answer, and build the track from how long the lead’s filter takes to open.
Emmanuel Top — “Turkish Bazar” (1994): one sweeping line over punchy 909 kicks
Quick start
- Load
- Drift, Auto Filter, Overdrive, Drum Buss, Compressor
- Set
- Drift Saw, mostly 1/16 notes, few slides
- Auto Filter LP 24, cutoff ramp up and back over 32 bars
- Overdrive Drive 25%
- 909 kick Drum Buss Transients +20%, Boom off
- Compressor sidechain from the kick, 4:1, Attack 1 ms, Release 80 ms, 2–3 dB
- You should hear
- One acid line sweeping slowly through the whole track over a dry, hard kick.
- Live edition
- Standard and up
Why it matters. It is a peak-time staple of mid-90s acid techno from the French producer behind “Acid Phase”. Documented: Wikipedia says the track has a sweeping acid bassline from the TB-303 and punchy TR-909 kicks, and that “Acid Phase” followed and was later popularised by Kai Tracid (Wikipedia: Emmanuel Top). The Discogs entry lists an original mix and the remixes, and notes a spoken-word sample of Jim Morrison reading his poetry (Discogs: Turkish Bazar mini LP).
By ear: one 303 line that plays almost the whole track, with long cutoff sweeps. A dry, hard 909 kick, offbeat open hats, and the spoken sample used sparingly over the top.
Signature moves → Live 12
- One line, swept (Documented: sweeping 303). Use one 303 pattern with mostly 1/16 notes and few slides. Draw Auto Filter’s cutoff as a 32- or 64-bar automation ramp up and back down, or map it to the Max for Live LFO device on a very slow free rate (about 0.016 Hz is one cycle per 32 bars at 125 BPM).
- Punchy 909 kick (Documented: 909). Use a 909 kick sample in Drum Sampler or Simpler, with a short transient boost (Drum Buss Transients +20%, Boom off). Then sidechain the 303 group lightly from the kick (Compressor, Ratio 4:1, Attack 1 ms, Release 80 ms, 2–3 dB of gain reduction).
- Spoken sample as a hook (Documented: sample present). Put a short spoken phrase in Simpler, filtered to a telephone band (EQ Eight HP 300 Hz, LP 3.5 kHz) and sent to a dark reverb. Use it once every 16–32 bars. Record your own reader rather than sampling a famous voice.
What to steal: one line and one long sweep are enough for a whole track, as long as the kick is hard and the sweep is slow.
Josh Wink — “Higher State of Consciousness” (1994–95): the build that never quite peaks
Quick start
- Load
- Analog, Auto Filter, Pedal, EQ Eight, Echo
- Set
- Analog Saw, Res 75%
- Auto Filter LP 12, cutoff stepped up over 16 bars, pulled back by half several times
- Pedal Distortion, Gain 60–70%, Mid +2 dB, Treble +3 dB
- EQ Eight HP 90 Hz only; no taming of the top end
- Echo send 1/16 dotted, low feedback
- You should hear
- A harsh, fizzing distorted 303 that nearly opens three times before it really does, then stays open for only a few bars.
- Live edition
- Suite
Why it matters. It was a UK top-ten hit (No. 8 in 1995 and No. 7 for the 1996 remixes) and probably the best-known 303 track outside the clubs (Wikipedia: Higher State of Consciousness). Documented: Wink made it in his bedroom. Electronic Sound reports a TB-303, 808 and 909 played live, an S950 sampler triggering a few samples and stabs, and a 16-track mixer. The earliest version was built around a sped-up loop from Lyn Collins’s “Think (About It)”. Wink describes the track as tension that seems about to peak and holds back. When the label asked him to recut it because the highs were too high, he refused, and it came out as he mixed it, with no compression or clipping on delivery (Electronic Sound: Landmarks). Wikipedia lists two 303s, a 909 and a DOD heavy rock distortion pedal, with sequencing on a computer, and quotes him: “My studio was my bedroom” (Wikipedia). Compilation details from Discogs: SR 315.
Signature moves → Live 12
- Pedal after the 303 (Documented: distortion pedal). Run the 303 into Pedal (Distortion mode, Gain 60–70%, Mid +2 dB, Treble +3 dB) after the filter. The harsh top end is meant to be there. Wink compares it to the attitude of a distorted guitar.
- Hold back the peak (Documented intent, recipe By ear). Automate the cutoff up in steps over 16 bars, then pull it back by half before it fully opens, several times. Raise resonance on each attempt. When it finally does open, keep it open for only 4–8 bars before the breakdown.
- Stabs from a sampler (Documented: S950). Use Simpler in Classic mode with Warp off and a short one-shot stab, and add Redux with a mild sample-rate reduction (Downsample around 2, Bit Depth off) for grit (By ear: the S950’s exact settings are undocumented). Trigger it rarely.
- Leave the highs (Documented). Do not tame the top end with a de-esser or a high shelf cut on the master. Control the level with gain staging and a Limiter set only to catch peaks (Ceiling −0.3 dB, 1–2 dB of reduction at most).
What to steal: tension is in the retreat. Let the filter nearly open three times before it really does.
Hardcore Disco — “Hardcore Disco EP” (1994): London acid techno before the 303
Quick start
- Load
- Operator, Simpler, Roar, Glue Compressor
- Set
- Operator saw-like Osc A, filter LP 24, Resonance 60%; filter env Attack 0, Decay 180 ms, Sustain 0
- Voice Voices 1, Glide 50 ms
- Break Amen-style break in Simpler Slice, resequenced in 1/16s, HP 150 Hz, 6–8 dB under the kick
- Roar Serial, Soft Sine then Tube Preamp
- Glue Compressor 4:1, Attack 3 ms, Release Auto
- You should hear
- A fast, punky acid-style line with no 303 in it, over a straight kick with a chopped break underneath.
- Live edition
- Suite
Why it matters. Stay Up Forever was the label of the Liberators (Chris Knowles, Julian Sandell and Aaron Northmore), the core of London’s squat-party acid techno. Documented: RBMA Daily’s history says the label started in 1994 to release early Liberator productions. SUF001 was the Hardcore Disco EP, and its flip used chopped Amen breaks. Sandell came up with the name “acid techno”. Knowles had only a small DX synth and no 303 at the time, which made the acid sound hard to get. Later, D.A.V.E. the Drummer’s engineering made the sound “even beefier” (RBMA Daily: London acid techno, 2016; release from Discogs: S.U.F. 1).
By ear: a punk and free-party energy, harder and faster than Chicago, with breakbeats and acid-style lines that do not always come from a real 303. This is the honest exception on this page: the scene was built around the 303’s sound, but its first record documents the lack of one.
Signature moves → Live 12
- Fake the 303 with FM (Documented constraint, recipe By ear). Start from the Operator 303 recipe: Osc A saw-like (modulated by B at a low level), Operator’s filter on LP 24 with Resonance 60%, and the filter envelope at Attack 0, Decay 180 ms, Sustain 0. Set Voices to 1 and Glide to 50 ms. A 1980s DX-style FM tone through a resonant filter gets surprisingly close.
- Chopped Amen under four-to-the-floor (Documented: Amen on the flip). Slice an Amen-style break in Simpler (Slice mode, by Transient), resequence it in 1/16s, and layer it under a straight kick. High-pass the break at 150 Hz so the kick owns the low end.
- Beef from engineering (Documented: D.A.V.E. the Drummer’s role). Put the acid line on a group with Roar (Serial mode, two stages: Soft Sine, then Tube Preamp), then Glue Compressor (Ratio 4:1, Attack 3 ms, Release Auto), then Utility with Width 0% below the crossover. Push volume with saturation, not boost.
What to steal: the sound matters more than the box. If you do not have a 303, a resonant filter, a short envelope and hard drive get you most of the way.
Ceephax Acid Crew — “Acid Legacy EP” (2003): the primitive method, on purpose
Quick start
- Load
- Saturator, EQ Eight, Chorus-Ensemble, Vinyl Distortion
- Set
- Form 2–4 minute pieces, no section repeated more than twice
- Saturator Analog Clip, Drive 4 dB on the resampled mix
- EQ Eight HP 40 Hz, LP 12 kHz at 12 dB/oct, −1.5 dB at 6 kHz
- Chorus-Ensemble Rate 0.3 Hz, Amount 8%, Dry/Wet 30%
- Vinyl Distortion a little Tracing, no crackle
- You should hear
- Short, playful acid tracks whose cassette-style print softens the transients and adds a little wow.
- Live edition
- Standard and up
Why it matters. It is one of the records that kept the hardware 303 alive in the 2000s, when acid had moved into software. Documented: Andy Jenkinson started at about 12 on his brother’s SH-101 (his brother is Squarepusher). From 1997 to 2002 his acid tracks used vintage, mainly Roland, drum machines and synths, especially the TB-303, and were often recorded to cassette, which Wikipedia describes as a “primitive acid house aesthetic and methodology”. His live rig is listed as TB-303, TR-909, TR-707, SH-101, a Kenton Pro-2000 and a Yamaha RS7000 (Wikipedia: Ceephax Acid Crew). The EP has six tracks from 1:41 to 6:12, written and produced by Jenkinson (Discogs: BRK38).
By ear: short, playful tracks rather than ten-minute jams, bright 707 and 909 drums, and a 303 that is usually busy and melodic. The cassette stage softens the transients and adds a little wow.
Signature moves → Live 12
- Short forms (Documented: track lengths). Write 2–4 minute pieces. Pick one 303 idea, one drum idea and one change, then stop. Use Arrangement locators every 16 bars and do not let any section repeat more than twice.
- Cassette as a stage (Documented method, Live recipe By ear). Resample the finished mix to a new track through a chain that imitates tape: Saturator (Analog Clip, Drive 4 dB), EQ Eight (HP 40 Hz, LP 12 kHz at 12 dB/oct, a small dip at 6 kHz), a Chorus-Ensemble set very slow and shallow for wow (Rate 0.3 Hz, Amount 8%, Dry/Wet 30%), and Vinyl Distortion with only a little Tracing Model.
- Hardware sequencing feel (Documented gear). Program the 303 parts with step entry rather than playing them, and keep the drums straight. If you use a TD-3, follow the sync and recording recipe and record the 303 as audio before the cassette stage.
What to steal: limits are a style. Short forms, a fixed hardware palette and one lossy print stage give acid a character that an endless software session rarely does.
AFX — “Analord” (2004–05): an analogue studio with a hardware sequencer
Quick start
- Load
- External Instrument, Analog, Drift
- Set
- Sequencing everything from Live clips; the 303 part to a TD-3 through External Instrument
- 303 line Analog, Saw, Res 60%
- 101-style lead Drift pulse wave, sub on, short filter envelope, LFO → pulse width, 0.5 Hz, 20%
- Writing the two as call and response, not in unison
- Groove MPC 16ths 58–62% on drums only; the 303 straight
- You should hear
- An acid line as one voice in a dense, often melancholy ensemble, answered by a lead over swung drum machines.
- Live edition
- Standard and up
Why it matters. After years of computer-based work, Richard D. James released eleven vinyl EPs made mainly on analogue hardware, and a large share of them are acid. Documented: Wikipedia lists the gear as TR-606, TR-808 and TR-909 drum machines, a Roland MC-4 sequencer, an SH-101 and a TB-303, plus a Synton Fenix modular and other polysynths. It dates the recordings 2003–2005 and the releases December 2004 to July 2005 (Wikipedia: Analord). The series was later condensed into Chosen Lords (2006).
By ear: the 303 parts sit inside dense, often melancholy arrangements with several synths, rather than carrying the track alone. Melodic SH-101 lines, swung drum machines and detuned polysynth chords are common.
Signature moves → Live 12
- One sequencer as the brain (Documented: MC-4). Drive everything from one place. In Live, build the pattern in MIDI clips but send the 303 part to a TD-3 through External Instrument, and drive any analogue gear with CV Tools (sync and CV recipe). Record each part as audio once it works.
- 303 plus 101 (Documented: both). Pair a 303-style line (Analog, Saw, Res 60%) with an SH-101-style lead: Drift with a pulse wave, sub oscillator on, a short filter envelope, and the LFO on pulse width (Rate 0.5 Hz, Amount 20%). Write them as call and response, not in unison.
- Swing on the drum machine (By ear). Use the MPC 16ths 58–62% groove from the Groove Pool on drums only. Keep the 303 straight so the two pull against each other.
- Modular colour (Documented: Synton Fenix). Add one slowly evolving sound: Meld or Wavetable with a slow, free-running LFO on wavetable position, or the Max for Live “LFO” device modulating Spectral Resonator’s frequency at about 0.05 Hz.
What to steal: treat the 303 as one voice in an ensemble. Give it a partner line and a swung drum machine, and it becomes music rather than a demo of a box.
Tin Man — “Neo Neo Acid” (2012): the 303 made mournful
Quick start
- Load
- Analog, Saturator, EQ Eight, Hybrid Reverb, Wavetable
- Set
- Analog Saw, Resonance 25–40%, Env Mod 30%, Decay 500–800 ms, Cutoff 800 Hz–1.2 kHz
- Accents velocity to amp around 40%, to filter envelope around 20%
- Saturator Soft Sine, 2 dB; EQ Eight HP 80 Hz
- Hybrid Reverb send Hall, 3.5 s, 20%
- Pad Wavetable, Attack 400 ms, Release 1.5 s, sevenths or ninths, kept under 1 kHz
- You should hear
- A soft, mournful 303 that sounds closer to a voice than an alarm, singing over slow chords.
- Live edition
- Suite
Why it matters. It is one of the records that defined a softer, more emotional modern acid, the opposite of the hard acid techno of the 90s. Documented: RA’s podcast notes say the TB-303 features heavily in Johannes Auvinen’s work, especially on Neo Neo Acid. He describes the box as made for realistic bass accompaniment and now used for “amorphous acid sounds”. RA describes his lines as softening and sounding mournful rather than shrill (RA.442: Tin Man). The album has eight tracks, each between about 7 and 9 minutes (Discogs: ATLP-02).
By ear: low resonance, long decay, slow tempos, chords underneath and very little distortion. The 303 is closer to a voice than an alarm.
Signature moves → Live 12
- Soft acid settings (Documented character, values By ear). Resonance 25–40%, Env Mod 30%, Decay 500–800 ms, Cutoff mid (800 Hz–1.2 kHz). Use only gentle saturation (Saturator, Soft Sine, 2 dB). Accents raise the volume more than they raise the filter: set velocity to amp around 40% and to filter envelope around 20%.
- Chords under the line (By ear). Use a slow pad from Analog or Wavetable with Attack 400 ms and Release 1.5 s, voiced as sevenths or ninths. Keep it under 1 kHz with EQ Eight so the 303 sits above it.
- Long forms (Documented lengths). Plan 7–9 minutes with changes every 32 bars: one note changes in the pattern, decay lengthens, the pad changes chord. Use clip envelopes on the 303’s decay that loop independently of the clip (unlinked, 24 bars long) so the timbre keeps shifting.
What to steal: turn the resonance down and the decay up, add chords, and the 303 stops shouting and starts singing.
Luke Vibert — “Valvable” (2019): a whole album from three Roland boxes
Quick start
- Load
- Analog, Auto Filter, Overdrive, Drum Rack, Chorus-Ensemble
- Set
- 303 Analog Saw, Mono, Glide 55 ms, Legato; Auto Filter LP 24, Res 55%; Overdrive 15%; HP 60 Hz
- 808 Drum Rack, long kick decay, gaps and pickups instead of a straight four
- Chords Analog, two saws detuned 8 ct, 12 dB low-pass at about 2 kHz, short release
- Chorus-Ensemble Chorus, Rate 0.6 Hz, Amount 40%
- Template three tracks only until the track is finished
- You should hear
- Playful, funky acid with 808 drums that swing and pause like breakbeats and off-beat minor-seventh stabs.
- Live edition
- Standard and up
Why it matters. Vibert has made acid since the 1990s, and in 2007 he started the I Love Acid club night with Posthuman, named after one of his tracks (Wikipedia: Luke Vibert). The label followed in 2014, and the night won DJ Mag’s Best British Club Event in 2019 (Wikipedia: Posthuman). Documented: Wikipedia says Valvable was written entirely on three pieces of Roland gear: a TB-303, a TR-808 and a JX-3P. That sentence carries no citation there, so treat it as likely but not proven. The release was a stamped double vinyl limited to 303 copies, with ten tracks (Discogs: ILA020).
By ear: playful, funky acid with 808 drums that swing and pause like breakbeats, rather than straight four-to-the-floor. JX-3P chords and stabs give the harmony.
Signature moves → Live 12
- Three tracks, nothing else (Documented constraint). Make a template with one 303 track, one 808 Drum Rack and one polysynth track, and no more until the track is finished. If a part is missing, change one of the three, do not add a fourth.
- JX-3P-style chords (Documented: JX-3P; recipe By ear). Use Analog with two detuned saws, a 12 dB low-pass at about 2 kHz, Chorus-Ensemble (Chorus mode, Rate 0.6 Hz, Amount 40%) and a short release for stabs. Play minor sevenths, often off the beat.
- 808 that breathes (By ear). Program kick, snare and hats with gaps and pickups instead of a straight four, and add 808 cowbell or claves for funk. Use a long 808 kick decay so it doubles as low end under the 303, and high-pass the 303 at 60 Hz.
What to steal: limit yourself to three instruments for a whole record. The palette becomes the style.
Records considered and left out
- A Guy Called Gerald — “Voodoo Ray” (1988). Included only if documented as 303-led. Wikipedia’s account names a drum machine and an Akai sampler and describes the Peter Cook and Dudley Moore samples, but does not mention a TB-303 (Wikipedia: Voodoo Ray). Left out.
- Baby Ford — “Oochy Koochy” (1988, Rhythm King). Often called the first British acid house record. In a 1988 interview Ford says almost everything on it is sampled and the bass is synthesised but not named. He calls the TB-303 “ideal” for acid and uses it for his bass sequences elsewhere (Music Technology, Dec 1988: Acid Radical). That is not enough to call it 303-led.
- Union Jack — “Two Full Moons and a Trout” (1993, Platipus PLAT 06) and Plastikman — Sheet One (1993). Both are acid landmarks, but no source reachable for this page documents how they were made. Consumed is out of scope by design.
- Big beat acid (The Chemical Brothers, Fatboy Slim, Propellerheads, The Crystal Method) is covered on Famous Big Beat & Breakbeat Records.
Patterns across the canon
Read across all thirteen and the same few decisions keep coming up. They matter more than any particular box.
- The pattern is programmed once and then performed. Pierre turning knobs while a pattern loops, Spanky dropping beats in and out, and Armando’s live-synced drums are all Documented. The record is the performance of the filter and the mutes, captured to tape.
- Accidents are kept. Phuture did not know how to program the 303, and Armando’s line was a preset that came back after a battery change (Dunn’s account). Both are Documented. Live 12’s generators (Seed, Rhythm) are a deliberate way to get the same thing.
- More than one 303, each with its own job. Hardfloor’s “up to six”, Wink’s two (Wikipedia) and Armando running two sequences at once are all Documented. Splitting the lines into low, lead and answer roles is By ear.
- Distortion after the filter decides the era. Clean or lightly driven in Chicago (By ear), a guitar pedal for Wink (Documented), heavy drive in German and London acid techno (By ear), and almost none for Tin Man (Documented softness).
- The palette is small and fixed. A 303 and two Roland drum machines (Phuture), three boxes for an album (Vibert), an analogue rig with one sequencer (Analord), a small DX synth when there was no 303 (Stay Up Forever). All are Documented.
- The slide carries the melody, the filter carries the arrangement. Singh used the slide for raga ornament (Documented). Everyone else built long forms from cutoff and resonance moves over 16–64 bars (By ear).
| Era | Tempo | 303 role | Distortion | Live 12 core |
|---|---|---|---|---|
| 1982 proto (Singh) | Disco | Melodic, slide-heavy | None to light | Analog, long Glide, Scale mode, 808 kit |
| 1986–87 Chicago | About 120–125 | Bass ostinato, then filter performance | Light | Macro rack on cutoff, resonance, env mod and decay, Activator mutes |
| 1992–95 European / US crossover | 125–140+ | Layered leads, long builds | Heavy, pedal-style | Several 303 tracks, Pedal, stepped automation |
| 1994–97 London acid techno | Fast | Relentless 1/16s, sometimes faked | Heavy, plus bus glue | Operator 303, Roar Serial, Glue, chopped breaks |
| 2003–05 hardware revival | Varies | One voice among several | Light, tape-style | External Instrument, CV Tools, cassette print chain |
| 2012–19 modern | Slow to mid | Soft and emotional, or funky | Minimal | Low resonance, long decay, three-track templates |
Related
- New alongside this page: Acid 303 — Advanced Techniques
- Acid / 303 — the core patches, accent and slide, the TD-3 set-up and the distortion stacks this page builds on
- Acid Rack · Dub Delay Send Rack · Drum Bus Rack
- Hard Techno & Hardcore · Electro · Breaks & Big Beat · Psytrance · Deep House
- Famous Big Beat & Breakbeat Records (big beat acid lives there) · Famous Dubstep Tracks (Skream’s TS404 line)
- Analog & Drift · Operator · Roar & Saturation · MIDI Tools · Hardware & Modular Integration
- Saturation & Distortion · Automation & Modulation · Performance & Live · Tape, Lo-fi & Analog Character
- BPM to ms · Genre Tempo Map