ABLETON 12 SOUND DESIGN ATLAS

Acid 303 — Advanced Techniques

Past the basic squelch: what the TB-303's accent, slide, gate and envelope circuits actually do (documented) and how to copy each in Analog, Drift, Meld and Operator; the pitch/time sequencer and its happy accidents; knob rides as composition; two-303 interplay and polymeter; self-oscillation, drive order, multiband, formant, FM, Meld Squelch and wavefolding; feedback, freeze and resampled acid; and six style recipes with generic patterns.

Difficulty
Advanced
Live edition
Suite
Max for Live
In some recipes

The Acid / 303 page gets you a working squelch: a TD-3 or an Analog/Drift/Operator patch, velocity accents, Glide slides, Roar and a dub send. This page is the second floor. It starts from what the TB-303's circuits are documented to do, because most "my emulation sounds wrong" problems are one of six specific behaviours: the accent sweep that climbs on consecutive accents, the decay that is forced short on accents, an Env Mod that never reaches zero, a fixed slide, a gate that is a little over half a step, and a filter whose bass is thin by design. Then it treats the sequencer as an instrument with its own logic, the knobs as the real composition, and the line as raw material for space and resampling. Circuit statements are labelled Documented with a link, or By ear. Tempo maths assumes 125 BPM unless stated (1/16 = 120 ms, 1 bar = 1920 ms) and Live's note naming (C3 = middle C, A0 = 55 Hz, A1 = 110 Hz).

Sources used throughout. Robin Whittle's Devil Fish documentation is the most detailed public account of the TB-303 circuit: the accent sweep circuit, gate, CV and slide timing, and the Devil Fish overview, whose list of modifications also tells you what the stock unit could not do. Tim Stinchcombe's TB-303 diode ladder filter model covers the filter. History and specs: Wikipedia, Roland TB-303 and its references, Vintage Synth Explorer, Wikipedia, Acid house. Live: the Live 12 manual chapters on instruments, audio effects, MIDI Tools, editing MIDI, launching clips and Clip View.

Anatomy

BehaviourWhat the hardware doesStatusLive 12 emulation (recipe)
Accent sweepA capacitor-smoothed extra cutoff kick that rises higher on consecutive accents, more so with resonance upDocumented (Whittle)Accent capacitor
Accent decayFilter envelope decay forced to its shortest setting on accented notesDocumented (Whittle)Velocity-zoned decay
Env Mod floorEnv Mod cannot reach zero; cutoff ceiling is lowDocumented (Whittle, by the Devil Fish changes)Macro ranges
SlideFixed time, not variable on the stock unit; gate held through the slideDocumented (Whittle)Const glide
Gate3.5 of 6 clock pulses per 1/16 step; tied and slid notes keep the gate highDocumented (Whittle)Gate 58%
Amp envelopeAbout 3 ms attack, fixed long exponential decay; accented notes louder via the filter envelope feeding the VCADocumented (Whittle)Fixed VEG
FilterDiode ladder with a four-pole core plus coupling-capacitor high-pass effects; does not self-oscillateDocumented (Stinchcombe; slope figures disagree between sources)Ladder + thin bass

Recipes

Part 1 — How the 303 actually behaves, and how to copy it

The accent sweep ("wow"): a capacitor that remembers the last accent

Instruments: Analog, Drift, Wavetable · Devices: Envelope Follower, Auto Filter · Level: advanced · Genres: all acid

Quick start

Load
Instrument Rack, Analog, Auto Filter, Envelope Follower, Utility
Set
  • Chain 1 your 303 patch, then Auto Filter LP 12, DFM, Freq around 900 Hz, Res 0
  • Chain 2 Velocity zone 110–127; Analog sine with a 40 ms amp decay
  • Envelope Follower after the sine, Rise 15 ms, Fall 350 ms
  • Mapping follower → Chain 1 Auto Filter Freq, Min 900 Hz, Max 2.2 kHz; Utility Gain −inf after the follower
  • Macro Resonance Analog’s filter Res and the follower’s map range together
You should hear
An isolated accent gives one rounded bump; a run of accents climbs, each opening further than the last.
Live edition
Standard and up

Documented: on the TB-303 an accented note does not just add envelope depth. A diode and resistor feed a 1 µF capacitor through the second half of the Resonance pot; the smoothed result is summed into the filter frequency. One accent gives a quick, rounded rise and fall; several accents close together climb, because the capacitor has not discharged, and the effect grows as resonance is raised (Whittle, "303 unique"). That climbing "wow" on runs of accents is the sound velocity-to-envelope alone never gives you.

The Live version has two parts: velocity still drives the normal envelope, and a second, slow, leaky control signal is charged only by accented notes and added to the cutoff. Envelope Follower is the capacitor: a fast rise and a slow fall means back-to-back accents stack.

  1. Build an Instrument Rack with two chains. Chain 1: your 303 patch (from Acid / 303) followed by an Auto Filter LP 12 with the DFM circuit, Freq around 900 Hz, Res 0 — this filter receives the wow.
  2. Chain 2: Velocity zone 110–127 in the Zone editor. A second Analog playing a sine with a 40 ms amp decay, then the Envelope Follower (a built-in Max for Live device, Standard and up), then Utility Gain −inf. Chain 2 is silent but its follower still sees the signal before Utility — put the Utility after the follower.
  3. Envelope Follower: Rise 15 ms, Fall 350 ms, Gain to taste. Map its output to Chain 1's Auto Filter Freq, Min 900 Hz, Max 2.2 kHz.
  4. Macro "Resonance" mapped to both Analog's filter Res and the follower's map range, so more resonance = bigger wow, as on the hardware.
  5. Test with the line above. Shorten Fall until isolated accents stop sounding smeared, but keep it long enough that the accent run climbs.
Do not drive the wow from the main chain's own audio: unaccented notes would charge it too, and the whole point is that only accents do. The velocity zone is what makes it an accent circuit.

Accent shortens the decay: two velocity zones, two envelopes

Instruments: Analog, Drift, Operator · Level: advanced · Genres: acid house, acid techno

Quick start

Load
Operator
Set
  • Filter envelope Time < Vel negative, around −60%
  • Decay long, 800 ms, for unaccented notes
  • Test ride Decay from 200 ms to 1.5 s over 16 bars
You should hear
Accents stay the same snappy length while the notes between them grow into long squelches.
Live edition
Suite

Documented: on accented notes the 303's main (filter) envelope decay is shorted to a fixed short time — the same as the Decay pot fully anticlockwise — while normal notes follow the Decay pot. The same envelope also feeds the VCA on accents through an RC network that softens its attack, which is the main reason accents are louder (Whittle). So turning Decay up lengthens only the unaccented notes: accents stay snappy whatever you do. That contrast is a big part of why long-decay acid still sounds punctuated.

  1. Operator route (one instrument): in the filter envelope display, set Time < Vel negative (around −60%). Operator scales envelope segment rates by velocity, so velocity 127 notes run their decay faster. Set the decay itself long (800 ms) for unaccented notes. This keeps a single voice, so slides work across accents.
  2. Drift or Analog route (rack): neither has velocity-to-decay (Drift's mod destinations do not include envelope times; Analog offers Att < Vel and Env < Vel). Duplicate the patch into two chains split by velocity zone at 110. Map the Decay macro only to the Normal chain.
  3. Add the accent loudness the hardware gets from the envelope-into-VCA path: +3 to +4 dB on the Accent chain, and a 3 ms amp attack there (softer than the normal chain's 0–1 ms).
  4. Ride Decay from 200 ms to 1.5 s over 16 bars and listen: accents should stay the same length while everything between them grows into long squelches.
This is why a real 303 line at full Decay still has a "spine": the accents are the beat, the long notes are the colour. A one-envelope emulation with Decay at 1.5 s turns everything into one long wash.

Env Mod that never reaches zero, and a low cutoff ceiling

Instruments: any · Devices: Instrument Rack macros · Level: intermediate · Genres: all acid

Quick start

Load
Instrument Rack
Set
  • Group your patch with Cmd/Ctrl+G, map the four controls to macros
  • Cutoff 150 Hz → 2.5 kHz
  • Env Mod 20% → 70%
  • Resonance 0 → 75%
  • Decay 200 ms → 2 s
You should hear
Every setting sounds like acid: even the “closed” setting still blips on each note.
Live edition
Intro and up

Documented, by inference from the mods: the Devil Fish "extended" Env Mod "to include zero" and up to three times the normal maximum, and doubled the Cutoff pot's maximum to 5 kHz (Whittle, Devil Fish; Whittle also states the stock Env Mod cannot reach zero in 303 unique). So on a stock unit the envelope is always doing something, and the knobs cannot open the filter as far as a Live filter can. Live's ranges are much wider; setting macro limits is how you get the hardware's "every setting sounds like acid" quality.

MacroStock-feel rangeDevil Fish-feel range
Cutoff150 Hz → 2.5 kHz150 Hz → 5 kHz
Env Mod (filter env amount)20% → 70%0% → 100%
Resonance0 → 75% (no self-oscillation)0 → 100% (self-oscillation allowed, see below)
Decay (normal notes)200 ms → 2 s30 ms → 3 s
  1. Group your patch (Cmd/Ctrl+G), map the four controls, and in the Macro Mappings view type the Min and Max per mapping from the table.
  2. The Env Mod minimum is the important one: at 20% even the "closed" setting still blips on each note.
  3. Save two rack presets, "stock" and "fish". Most of the time the narrow one sounds more like acid.

Fixed slide: Const glide, one voice, overlap by one step

Instruments: Analog, Drift, Meld, Operator · Level: intermediate · Genres: all acid

Quick start

Load
Analog
Set
  • Voice Voices 1, Legato on
  • Glide Gli on, Glide Mode Const, Time 60 ms, never changed
  • Clip overlap each slid note into the next by a 1/32 or more
You should hear
A semitone slide and an octave slide take the same time, so the octave reads as a swoop.
Live edition
Standard and up

Documented: the stock slide is fixed; the Devil Fish made it variable "to five times longer than normal" (Whittle). The sequencer drives it in a specific way: the slide signal goes high one 1/16 after the start of the slid note and stays high until the end of the following note; the CV jumps at the note boundary and the oscillator follows the slide circuit's output towards the new pitch; the gate does not drop (Whittle, slide timing). By ear / inference: a lag circuit takes about the same time for a semitone as for an octave, so big slides sound faster and more dramatic — the same behaviour as a constant-time glide.

InstrumentSlide settingsWatch out for
AnalogGli on, Glide Mode Const, Legato on, Voices 1Prop mode scales time by interval — the opposite of the 303
DriftVoice Mode Mono, Legato on, GlideGlide only applies in Mono
OperatorVoices 1, Glide on, Glide TimeGlide is polyphonic otherwise; Voices 1 makes overlaps legato
MeldMono, Legato on, Glide mode PortaGliss mode steps through semitones — a different effect
  1. Pick one glide time per track and leave it. Start at 60 ms; the point is that it never changes. By ear: 50–80 ms at 120–130 BPM matches most hardware recordings.
  2. Make the slide notes overlap. The Glissando transformation is not this — it writes pitch bend between notes; for a 303 slide you want overlapping notes in a mono legato voice.
  3. Because the hardware's slide flag affects the next note, a slid note followed by a tied note glides into the tie and holds. Draw the destination note long to copy it.
If the slide sounds stepped in Analog, Glide Mode is set to Prop or Legato is off and notes are retriggering just before the glide finishes.

Gate length and ties: 58% steps, held gates, no retrigger

Devices: Note Length, MIDI note editor, Span · Level: intermediate · Genres: all acid

Quick start

Load
Note Length
Set
  • Note Length before the synth, Mode Time, Gate around 58% (lines with no slides only)
  • With slides unslid notes 58% of a 1/16 in the piano roll; slid notes overlapping
  • Ties one long note across the tied steps
  • Amp release 5–10 ms
You should hear
Short gaps between unslid notes let the amp envelope reset: the 303’s “tick”, not a legato synth line.
Live edition
Intro and up

Documented: each 1/16 step is six clock pulses; a normal note's gate goes high at the start of pulse 0 and low halfway through pulse 3 — 3.5 of 6 pulses, about 58% of the step. Slid notes keep the gate high into the next note (Whittle). At 125 BPM that is 70 ms on, 50 ms off per step; at 140 BPM, 62 ms on, 45 ms off. The short gap matters: the amp envelope releases for a moment between every unslid note, which is the 303's "tick".

  1. Fastest route: put the Note Length MIDI effect before the synth, Mode Time, Gate around 58% — but it also shortens the overlaps that make slides. Use it only on lines with no slides.
  2. Line with slides: in the piano roll select all the unslid notes, then type their length, or use Span with Staccato articulation and adjust Variation to 0. Leave the slid notes overlapping.
  3. Ties: draw one long note across the tied steps. On the 303 a tie holds the gate, so the amp keeps decaying without retriggering — in Live a long note in Legato mode does exactly that.
  4. Amp release 5–10 ms so the gate gaps are heard.

The fixed amp envelope: 3 ms attack, long decay, accent through the VCA

Instruments: Analog, Drift, Operator · Level: intermediate · Genres: acid house, deep acid

Quick start

Load
Analog
Set
  • Amp Env A 3 ms, D 2 s, S 0, R 8 ms
  • Accents modulate amp level from Filter Env rather than raising velocity sensitivity
You should hear
Note length set by the step grid, and long tied notes that die away instead of droning.
Live edition
Standard and up

Documented: the 303's volume envelope has a sharp attack (the stock attack "was ~3 msec"), an exponential decay of fixed, "rather long" time, and drives only the VCA; the Devil Fish made it variable from 16 ms to 3 s (Whittle, 303 unique). Because the 58% gate cuts each note before that decay completes, the audible note length is set by the step grid, not by an amp Decay knob. Most emulations get this wrong by giving the amp envelope sustain.

  1. Analog Amp Env: A 3 ms, D 2 s, S 0, R 8 ms. Drift: Env 1 is the amp: same values. Operator: Osc A envelope A 3 ms, D 2 s, Sustain −inf dB, R 8 ms.
  2. Accents louder via the accent chain or velocity to amp (Drift Vel > Vol 30–40%). The hardware derives this from the filter envelope, so it is a short bump, not a level change for the whole note: on Analog, try modulating amp level from Filter Env rather than raising velocity sensitivity.
  3. Long tied notes then fade naturally. That fade on ties is part of the sound: a held 303 note dies away instead of droning.

The filter: ladder core, thin bass, and the 18 vs 24 argument settled honestly

Instruments: Drift, Operator, Meld · Devices: EQ Eight · Level: advanced · Genres: all acid

Quick start

Load
Operator, EQ Eight, Utility
Set
  • Operator Saw, Filter LP 24, circuit PRD, Flt. Drive 3 dB
  • Key tracking note pitch to cutoff low or off
  • EQ Eight after the synth: HP 60 Hz 12 dB, bell 110 Hz +2 dB Q 1.4
  • Utility Mono
You should hear
A ladder-filtered saw with the 303’s thin, weedy bass and a small low bump, before any distortion.
Live edition
Suite

Documented, and contested: sources disagree on the slope. Wikipedia, citing Roland, gives a 24 dB/oct non-self-oscillating low-pass (Wikipedia); Vintage Synth Explorer lists 18 dB/oct (VSE). Tim Stinchcombe's circuit model resolves it: a four-pole diode ladder core whose response is reshaped by five sets of coupling capacitors that add high-pass behaviour, plus a real low resonant peak that boosts the bass region (Stinchcombe). Whittle separately notes the TB-303's "weedy bass response" from low-value coupling capacitors (Whittle). So the honest summary is: not a clean 18 or 24, but a ladder whose skirts and bass are shaped by the rest of the circuit. The basic page's two-12 dB trick is one approximation; this is another.

Live filterLadder-nessUse for
Operator / Auto Filter PRDLadder design per the manualClosest structural match
Drift Type II (MS2, 24 dB)Sallen-Key, rounderSmoother, "modern clone" acid
Drift Type I (12 dB, DFM-based)Gentler skirt, can screamChewy, Devil Fish-style
Meld LP Crunch 12dBFeeds its distortion back into itselfFilter + drive in one
  1. Cutoff tracking. The Devil Fish added variable filter tracking, which suggests the stock unit had little or none (Whittle; the exact stock amount is undocumented here). Set Drift's filter Key to 0.00–0.25 rather than 1.00: high notes then sound darker than low ones relative to their pitch, which is the 303's octave-jump character.
  2. On Operator and Analog, keep note pitch to cutoff modulation low or off for the same reason.
  3. Put the EQ high-pass after the synth, not before distortion only: the thinness is part of the dry tone that the distortion then works on.

Part 2 — The sequencer and its accidents

Pitch mode and time mode: why "wrong" lines happened, and Recombine to recreate it

Devices: MIDI Tools (Recombine, Rhythm, Seed) · Level: advanced · Genres: all acid

By ear / scene knowledge (owners’ descriptions; not checked here against Roland’s own text): the 303 writes a pattern in two separate passes: in pitch mode you enter a list of pitches, each with optional octave up/down, accent and slide flags; in time mode you enter, per step, a note, a tie or a rest. The sequencer then deals the pitch list out, in order, to the steps marked as notes. Change the time pattern and every pitch after the change shifts to a different step. Roland's procedure card for these operations is reproduced, as images, on Whittle's site for anyone who wants to check it; Documented: the machine shipped without an English-language manual in the US, which made programming harder (Wikipedia, citing Attack Magazine). By ear / scene knowledge: a lot of classic lines sound like a reasonable pitch list landing on an unexpected rhythm — accents and slides attached to pitches, not to beats, drifting across the bar.

  1. Write the pitch list: a 1-bar clip of 16 straight 1/16 notes (or Seed with Density 100%, Minimum and Maximum Pitch a fifth or octave apart, Key Track on). Set accents as velocity 127 on chosen notes.
  2. Write the time pattern: delete some notes (rests) and stretch others over the deleted step (ties). That is the "edit" pass.
  3. Make the 303 accident: select all, MIDI Tools → Recombine, Dimension Pitch, Mode Rotate, Rotation Steps 1. The pitches move one note along while the rhythm stays — exactly the shift you get on the hardware after inserting or removing a note in time mode. Rotate Velocity the same amount if you want the accents to travel with the pitches (hardware behaviour), or leave velocity unrotated to keep accents on the rhythm.
  4. Try Mode Shuffle on Pitch only for a "different pitch list, same rhythm" variation, and duplicate the clip before each attempt so you can A/B.
Keep accents travelling with pitches. Accents that stay on the beat are the main reason programmed-in-Live acid sounds "correct" rather than strange.

Octave up/down flags as randomness: Random MIDI effect and Recombine

Devices: Random (MIDI effect), Recombine · Level: intermediate · Genres: acid techno, Chicago acid

Quick start

Load
Random, Velocity, Analog
Set
  • Random Chance 15–25%, Choices 2, Scale 12, Mode Rnd, Sign Add
  • Velocity Random 8
  • Down flags write the line an octave higher, Sign Sub
You should hear
Each note has a chance of jumping up an octave, so slid notes sometimes swoop further than you would write by hand.
Live edition
Standard and up

On the 303 the octave is a per-note flag (up, down, or neither), so octave jumps are cheap to enter and easy to misplace. Live can do the same either destructively (transpose chosen notes ±12) or live, with the Random MIDI effect set to choose between the original note and an octave up.

  1. Random MIDI effect before the synth: Chance 15–25%, Choices 2, Scale 12 (semitones per choice), Mode Rnd, Sign Add. Each note has that chance of jumping up an octave.
  2. For "down" flags, write the line an octave higher and set Sign to Sub.
  3. When a bar works, record the output to a new MIDI track (MIDI From: the acid track, Post FX) to freeze the accident into notes.
  4. Destructive alternative: select every third note, transpose +12, then Recombine Position Shuffle on those notes only.

Probability, velocity deviation and Rhythm accents: a line that never quite repeats

Devices: MIDI note editor Chance and Velocity Deviation, Rhythm generator · Level: intermediate · Genres: acid techno, hypnotic acid

Hardware acid repeats exactly; the variation comes from the hands. When you cannot ride knobs for 8 minutes, per-note Chance and Velocity Deviation give the pattern small, controlled mutations. The basic page covers generating a line with Seed and Velocity Shaper; this is about keeping it alive afterwards.

  1. Rhythm generator: Steps 16, Density 55%, Accent on with Accent Frequency 3 or 5 and an Accent Offset of 1 — accents every 3 or 5 steps fall across the bar line, the polymetric accent idea in one clip.
  2. Open the Chance editor in the clip. Leave the root notes on strong steps at 100%. Set passing notes to 40–60%. Use Play One groups on two alternative notes on the same step so exactly one of them sounds each pass — a two-pitch "decision" per loop.
  3. Velocity Deviation on accented notes: −15 (so they sometimes drop below your accent zone threshold of 110 and become plain notes). On a split-decay rack that switches the envelope too.
  4. Chance Randomize with a 20% Randomization Amount on the fills once you have a good starting point.
Do not put Chance on slid notes. If the destination of a slide drops out, the slid note just holds through an empty step, which sounds like a mistake rather than a variation.

Pattern chains with Follow Actions: the 303's track mode, with dice

Feature: Session View Follow Actions · Level: intermediate · Genres: acid house, live acid

The 303 chains patterns into songs. Session View does the same with Follow Actions, and adds probability: each clip has Follow Action A and B with Chance A/B, a Follow Action Time, and Linked or Unlinked timing; Jump targets a specific slot; "Other" never repeats the current clip (Live 12 manual, Launching Clips).

  1. Four 2-bar clips on one track in adjacent slots, no gaps (a gap ends the group).
  2. Clip 1: Follow Action A Other, Chance 70%; B Play Again, 30%; Linked, Multiplier 2.
  3. Clips 2 and 3: Follow Action A Jump, Jump Target 1, Chance 100%. The line always returns home.
  4. Turn on Legato Mode in the clip launch settings of all four, so a switch keeps the play position instead of restarting the clip — necessary if Follow Action Time is ever shorter than the clip.
  5. Record the Session into Arrangement once you like the run, then edit. Follow Actions only run in Session View.

Part 3 — Performance as composition

Knob rides over 8–64 bars: the five controls and their automation shapes

Feature: Arrangement automation, clip envelopes · Level: advanced · Genres: all acid

Documented: Phuture's "Acid Tracks" (Trax, 1987) came from experimenting with a cheap TB-303, and Ron Hardy broke it at the Music Box (Wikipedia, Acid house). By ear: on most acid records the pattern barely changes and the arrangement is the knob movement. Treat the five controls as five parts with different jobs and different time scales.

ControlTime scaleShapeJob
Cutoff16–64 barsSlow ramps with wobbles, opened in steps at section startsMain tension curve
Env Mod8–32 barsCounter-moves Cutoff: up when Cutoff is lowKeeps the squelch audible while dark
Resonance32–64 barsRises late, falls at the dropAggression
Decay4–16 barsFast pushes and pulls, often in 2-bar swellsPhrasing
AccentSection-levelSteps between 2–3 valuesPunch and wow
  1. Record rides in real time (Arrangement Record with Automation Arm on), not drawn. Then thin them with Simplify Envelope if Live 12.x shows it in the automation context menu, or redraw only the bars that went wrong.
  2. Keep the short-scale moves (Decay) in a clip envelope unlinked from the clip, e.g. 4 bars long on a 1-bar clip, and the long moves (Cutoff, Resonance) in Arrangement automation. They then combine without overwriting each other.
  3. Use the curve handles (Alt/Option-drag a segment) for exponential Cutoff ramps: linear ramps in Hz sound like they rush at the end.
  4. At every section start, jump Cutoff by a small step rather than continuing the ramp: listeners hear the step as an event.
Automation shapes for performance and long builds are covered in general on Automation and modulation; this is the acid-specific plan.

A hands-on macro rack and Push layout for rides

Devices: Instrument Rack, Macro Variations · Hardware: Push 2/3 · Level: intermediate · Genres: live acid

Quick start

Load
Instrument Rack, Drift, Auto Filter, Roar, Echo
Set
  • Normal chain velocity 1-109: Drift Mono, Legato, Glide 60; Auto Filter DFM LP12; Roar Serial; Echo throw, Dry/Wet 0
  • Accent chain velocity 110-127: Drift Env 1 D 200 fixed, +3 dB
  • Macro 1 Cutoff Both Drift LP Freq 150 Hz → 2.5 kHz
  • Macros Cutoff, Resonance, Env Mod, Decay, Accent left to right, then three extra controls
  • Macro Variations “intro”, “build”, “peak”, “release”
You should hear
Eight Push encoders that read like a 303 panel, with snapshots to jump between and ride from.
Live edition
Suite

The panel of a 303 is small enough to fit one bank of eight encoders, and the layout should match: Cutoff, Resonance, Env Mod, Decay, Accent left to right, then three "beyond the box" controls. Push shows the first eight macros of the selected rack. The plain version of this rack is on the acid rack page; this one adds the circuit behaviours from Part 1.

  1. Map in this order so the Push encoders read like the hardware panel. Rename each macro with its number for quick reading on the Push display.
  2. Macro Variations: save "intro", "build", "peak", "release" snapshots. Recalling one is a jump; ride from it.
  3. Macros only reach devices inside the rack, not track sends; that is why the throw is an Echo at the end of each chain. For a true send throw, use Push in Mixer mode for the send instead.
  4. Record one 64-bar take per arrangement section, then comp in Arrangement with take lanes.

Part 4 — Two 303s, polymeter and odd meters

Two-303 interplay: register, accents and call-and-response

Instruments: two acid tracks (any mix of TD-3 and Live synths) · Level: advanced · Genres: acid techno, acid house, acid trance

Quick start

Load
Roar, Pedal, Compressor
Set
  • 303 A A0–A1, saw, slides, HP 45 Hz, Roar Serial
  • 303 B A1–E2, square, staccato, HP 150–200 Hz, Pedal Fuzz or none
  • Rests each line rests where the other has its phrase, 2 bars each
  • Compressor on B, external sidechain from A, 2 dB
You should hear
Two acid lines that stay separate by register and texture, the higher one answering where the lower one rests.
Live edition
Suite

Two acid lines work when they disagree on something: register, accent placement, or which one is moving. By ear: the most common split is a low, slid, root-heavy line against a higher, staccato, accent-led one — and only one of them carries a big knob ride at a time.

Split303 A303 B
RegisterA0–A1, saw, slidesA1–E2, square, staccato
StereoCentre, monoCentre; width only on its delay return
EQHP 45 HzHP 150–200 Hz so it never fights A's body
RideCutoff in bars 1–32Cutoff in bars 33–64
DistortionRoar SerialPedal Fuzz or none — different textures
  1. Choose waveforms opposite: saw for one, square for the other. The square sits behind the saw even at the same level.
  2. Call-and-response by rests: put the rests of one line where the other has its phrase. One clip each, 2 bars.
  3. Sidechain B lightly from A (Compressor, external sidechain from A, 2 dB) so B gives way when A accents.
  4. Do not centre-pan one and hard-pan the other; club systems often sum to mono. Get separation from register and texture.

Polymetric acid: odd clip lengths against the 4/4 grid

Feature: clip Loop Length · Level: intermediate · Genres: acid techno, hypnotic acid, minimal acid

A 303 pattern can be shorter than 16 steps; in Live any clip loop can be any length. A 15-step line against a 16-step groove shifts one step per bar and realigns after 15 bars (240 steps); 7 against 16 realigns after 112 steps (7 bars); 5 against 16 after 80 steps (5 bars). The Live manual notes clips with different loop lengths create polymetric textures when played together (Clip View).

Loop lengthRealigns with 4/4 afterAt 132 BPMFeel
15 steps15 bars27 sSlow drift, nearly invisible
14 steps7 bars12.7 sDrifts by an 1/8 per bar
12 steps3 bars5.5 sThree-against-four (see next)
7 steps7 bars12.7 sStrong rotation
5 steps5 bars9.1 sFast, nervous rotation
  1. Clip View → Loop Length: type 0.3.3 for 15 sixteenths (bars.beats.sixteenths), or 0.1.3 for 7.
  2. Keep the drums at 1 bar. The acid clip loops independently in Session; in Arrangement, consolidate a long stretch so the drift is written out.
  3. Arrange around the realignment point: a 15-step line realigns every 15 bars, which does not match 16-bar phrasing. Either restart the clip at each 16-bar section (it snaps back) or let it run and treat the realignment as the event.

Euclidean (MIDI Tools) can generate odd-length accent rhythms directly: Steps 7, Density 3, then use the result as the accent velocity layer of a 16-step line.

Acid in 3/4 over 4/4: a 12-step phrase against the bar

Feature: clip Loop Length, Signature · Level: advanced · Genres: acid techno, acid trance

A 12-step (3/4 bar) loop against a 4/4 kick realigns every 3 bars, which is short enough to feel like a groove rather than drift. Writing it in dotted-quarter groupings (3 + 3 + 3 + 3 sixteenths) makes it ride across the beat.

  1. Clip loop 0.3.0 (three beats = 12 sixteenths). Set the clip Signature to 3/4 to read it more easily; it does not change playback.
  2. Accent every third step, i.e. every dotted 1/8 (360 ms at 125 BPM). Against the kick that lands on a different 1/16 of each beat in turn.
  3. Arrange in 12-bar sections (4 repeats of the 3-bar cycle), or restart the clip at every 16-bar boundary and accept a cut cycle.

Part 5 — Advanced tone

Resonance self-oscillation as a second voice

Instruments: Drift, Analog, Auto Filter · Level: advanced · Genres: acid techno, hard acid, experimental acid

Quick start

Load
Drift, Saturator, Limiter
Set
  • Drift filter Type I, Res to maximum, Key 1.00
  • Cutoff whistle on an octave, 12th or two octaves above the note
  • Env 2 → LP Frequency 10–15%
  • Saturator Soft Sine 4 dB
  • Limiter −1 dB, at the end before you start riding
You should hear
A sine whistle that follows the envelope and plays in tune with the line as a second voice.
Live edition
Intro and up

The stock 303 filter does not self-oscillate (Wikipedia); self-resonance is one of the Devil Fish additions (Whittle). Live's filters do, and that opens a sound the original cannot make: a sine whistle that follows the envelope and, with key tracking at 1.00, plays in tune with the line.

  1. Drift filter Type I, Res to maximum, filter Key 1.00 so the whistle tracks pitch. Turn Cutoff until the whistle sits on an octave, 12th or two octaves above the note: those intervals sound like a tuned second voice; anywhere else sounds like a wrong note.
  2. Env 2 → LP Frequency at a small amount (10–15%): each note starts with a short chirp before settling on the tuned whistle.
  3. Ride Res between 80% (squelch) and 100% (whistle) as a section change.
  4. On Analog, a 2nd-order LP with high Res and Freq Mod from Key at 100% does the same with a softer tone.
A self-oscillating filter can be 10–15 dB louder than the note at certain cutoffs. Put a Limiter at the end of the chain before you start riding, and check on the meter, not by ear, after a long session.

Drive before the filter vs after: two tones, one rack

Instruments: Operator, Meld, Analog · Effects: Roar, Saturator · Level: advanced · Genres: acid techno, acid breaks

Quick start

Load
Operator, Roar, Utility
Set
  • Pre Operator Flt. Drive 6 dB with an LP 24 PRD filter
  • Post same patch, Flt. Drive 0, Roar after
  • Utility level-match before judging
  • Both a little pre (3 dB), most of the distortion post
You should hear
Pre-filter drive gives a thicker, darker, “liquid” squelch with rounder resonance; post-filter gives the bright, screaming one.
Live edition
Suite

The basic page says the 303's distortion is post-filter, which is the classic sound. Pre-filter drive is a different, useful sound: the filter then sweeps through extra harmonics, so the squelch sounds thicker and more "liquid", and resonance gets compressed by the drive stage. Live has several pre-filter drive points: Operator's Flt. Drive (input gain before the filter), Analog's filter Drive chooser (Sym/Asym), Meld's filter Drive macro (saturation before the filter) and the self-distorting LP Crunch and Filther filters.

Drive before filterDrive after filter
Top endDark, controlled by cutoffBright, independent of cutoff
ResonanceCompressed, rounderExaggerated, screaming
AccentsLess contrast (drive levels them)More contrast
UseDeep, dub and "liquid" acidTechno, hard acid, rave
  1. Build it inside the instrument first: Operator Flt. Drive 6 dB with an LP 24 PRD filter (Flt. Drive is ignored on the Clean circuit).
  2. Then compare with the same patch, Flt. Drive 0, and Roar after. Level-match with Utility before judging.
  3. Many final chains use both: a little pre (3 dB) for thickness, most of the distortion post.

Multiband distortion: a clean low end under a destroyed squelch

Effects: Roar (Multiband routing), EQ Eight · Level: advanced · Genres: acid techno, hard acid, acid breaks

Quick start

Load
Roar, Utility
Set
  • Roar Multi Band; low crossover 150–200 Hz, high 3–4 kHz
  • Low band Soft Sine or no shaping, 0–2 dB
  • Mid band Diode Clipper or Tube Preamp at 10–14 dB
  • High band Bit Crusher or Fractal at a low amount; Env → Mid band Shaper Amount
  • Utility Bass Mono at 150 Hz after everything
You should hear
The fundamental almost clean under a hard-ground resonance zone, with accents grinding more than normal notes.
Live edition
Suite

Full-band distortion on acid smears the low end and fights the kick. Roar's Multi Band routing splits the signal into low, mid and high bands with a shaper stage on each, so you can leave the fundamental almost clean, grind the 300 Hz – 3 kHz resonance zone hard, and add a little fizz on top.

  1. Roar routing Multi Band. Set the low crossover at 150–200 Hz and the high at 3–4 kHz.
  2. Low band: Soft Sine or no shaping, 0–2 dB. Mid band: Diode Clipper or Tube Preamp at 10–14 dB — this is the sound. High band: Bit Crusher or Fractal at a low amount for digital edge.
  3. Roar's Env modulation source → Mid band Shaper Amount, so accents grind more than normal notes.
  4. Utility Bass Mono at 150 Hz after everything: multiband stages can introduce phase differences between bands.

Parallel acid: a clean line and a wrecked one, blended

Device: Audio Effect Rack · Level: intermediate · Genres: all acid

Quick start

Load
Audio Effect Rack, EQ Eight, Compressor, Roar, Erosion
Set
  • Clean chain EQ Eight HP 40, Compressor 3:1, fast, 3 dB GR
  • Wrecked chain EQ Eight high-pass at 150–200 Hz, Roar Feedback routing, Tri Fold
  • Erosion Wide Noise 15% on the wrecked chain, which sits at −8 dB
You should hear
The clean line keeps its note definition and accents while the wrecked chain adds sustained aggression underneath.
Live edition
Suite

Parallel processing keeps the note definition and the accent dynamics of the clean line while the wet chain supplies the aggression. Because both chains are fed by the same source, they stay phase-coherent if the wet chain does not add latency-varying devices or phase-shifting filters below 150 Hz.

  1. High-pass the wrecked chain at 150–200 Hz so it never touches the fundamental.
  2. Wrecked chain: Roar Feedback routing with the Tri Fold shaper is good for this — sustained ringing that would be unusable alone is fine at −8 dB under the clean line.
  3. Octave fizz chain at very low level adds a high ghost of the line; keep it below −15 dB or it reads as a separate part.
  4. For more on blending, see Parallel processing.

Formant and vowel acid: Auto Filter Vowel, Meld Vowel, Analog formant

Effects: Auto Filter (Vowel), Meld (Vowel filter) · Instrument: Analog · Level: advanced · Genres: acid trance, deep acid, electro acid

Quick start

Load
Auto Filter, Roar
Set
  • Synth 303 patch, cutoff a bit higher than usual
  • Auto Filter Vowel, Formant at its centre, Pitch around the line’s register
  • Formant mapped to the envelope follower so accents shift vowel
  • Roar Tube Preamp 5 dB, after the vowel filter
You should hear
The acid line speaks: accents shift the vowel, for example “oo” to “ah”.
Live edition
Suite

A resonant low-pass already sounds vowel-like ("yow"); a formant filter makes it speak. Live 12.2's Auto Filter has a Vowel type with Pitch and Formant controls, Meld has a Vowel formant filter whose Morph macro moves through vowel shapes, and Analog's filters include a formant mode (audio effects, instruments).

  1. Auto Filter Vowel after the synth: Formant at its centre, Pitch around the line's register. Map Formant to the envelope follower so accents shift vowel (e.g. "oo" → "ah").
  2. Inside Meld: Engine A Basic Shapes saw, filter Vowel, envelope 2 → Morph at 40% with a 250 ms decay. Every note says a short vowel glide — a "talking" acid line.
  3. Distort after the vowel filter, not before: before, the distortion's harmonics land on the formants and get exaggerated into a whistle.

FM-flavoured acid in Operator: velocity-driven modulator for accent bite

Instrument: Operator · Level: advanced · Genres: acid techno, acid electro, IDM acid

Quick start

Load
Operator, Roar
Set
  • Algorithm B→A; Osc A Saw, Osc B Sine Coarse 2
  • Osc B Level −18 dB, Osc Output Level < Vel 60%, own decay 150 ms
  • Filter LP 24, PRD, Freq < Vel 40%
  • Roar Diode Clipper 6 dB
You should hear
Plain notes stay round while accented notes bark with a metallic FM bite that the filter sweeps.
Live edition
Suite

A small amount of FM before the filter gives the saw a metallic edge that the filter then sweeps. Making the modulator level depend on velocity turns accents into FM accents: plain notes stay round, accented notes bark.

  1. Operator: Osc A Saw (or sine if you want a purer FM tone), Osc B sine modulating A (two-operator stack algorithm), B Coarse 2 for a hollow, square-ish bite; Coarse 3 for a nasal one; Fine detune B by a few cents for movement.
  2. Osc B level around −18 dB with Osc Output Level < Vel at 60%, so only loud notes get strong modulation. Give B its own short decay (150 ms) so the FM is a transient.
  3. Osc A Feedback (self-modulation) is an alternative single-operator route: it only works when no other oscillator modulates A.
  4. Filter after: LP 24, PRD circuit, Freq < Vel 40% for the normal accent opening.
Keep the modulator ratio integer (1, 2, 3). Non-integer ratios give inharmonic tones whose "pitch" disappears under resonance.

Meld's Squelch oscillator and self-distorting filters

Instrument: Meld · Level: advanced · Genres: modern acid, acid breaks, experimental

Quick start

Load
Meld, Utility
Set
  • Engine A Squelch, Amount 30%, Feedback 20%; Engine B off
  • Filter LP Crunch 12dB or Filther, Freq 400 Hz, Q 60%
  • Env 2 D 220 ms, → Squelch Amount 50%, → filter Freq 40%
  • Matrix Velocity → Squelch Amount 30%
  • Voice Mono, Legato, Glide Porta 60 ms
You should hear
An oscillator that squelches by itself before the filter, an acid voice that needs no external distortion.
Live edition
Suite

Meld has an oscillator literally called Squelch: its Amount macro sets the depth of its frequency-modulation algorithm and Feedback feeds signal back into it (Live 12 manual). Modulate Amount from an envelope and the oscillator itself squelches before any filter. Pair it with LP Crunch 12dB (a low-pass that feeds its own distortion back into itself) or Filther (hard diode clipper in, soft saturation out) for an acid voice that needs no external distortion.

  1. Engine A Squelch, Engine B off (or Sub at low level for weight under the thin oscillator).
  2. Modulation Matrix: Velocity → Squelch Amount 30%, so accents add modulation as well as level. Env 2 → Squelch Amount and → Filter Frequency.
  3. LP Crunch 12dB for warmer grit, Filther for an aggressive clipped tone, LP Switched Res with its Lofi macro high for a crushed, aliasing acid.
  4. Use Current Scale on if the set uses Scale Mode, so experiments with pitch modulation stay in key.

Wavefolder acid: Roar Tri Fold and Saturator Sinoid Fold, driven by accents

Effects: Roar, Saturator, Envelope Follower · Level: advanced · Genres: modern acid, acid techno, IDM acid

Quick start

Load
Saturator, Envelope Follower, EQ Eight
Set
  • Synth dark, fairly closed filter, cutoff low
  • Saturator Sinoid Fold, Drive 8–18 dB, Dry/Wet 50–70%
  • Envelope Follower → Saturator Drive +6 dB on accents
  • EQ Eight LP 9 kHz, HP 45
You should hear
Harmonics that appear in waves as drive rises: the brighter the note, the more it folds.
Live edition
Standard and up

A wavefolder flips the wave back on itself when it exceeds a threshold, so harmonics appear in waves as drive increases instead of piling up as with clipping. On a filtered acid line, folding after the filter means the sweep changes the folded harmonics too: the brighter the note, the more it folds.

  1. Put the folder after a fairly closed filter: near-sine input folds cleanly and musically. A bright saw into a folder is mostly noise.
  2. Saturator, Waveshaper section set to Sinoid Fold. Drive 8 dB is the first fold; each extra 6 dB or so adds another fold. Dry/Wet 50–70% keeps the fundamental.
  3. Or Roar's Tri Fold shaper in Single routing, with Roar's Env modulation source driving Shaper Amount in the Matrix tab.
  4. Ride Drive rather than Cutoff as the main performance control for a different shape of build.

Part 6 — Space, freezing and resampling

Acid into a delay feedback loop: Echo with reverb in the loop, and cross-fed returns

Effects: Echo, Roar, Returns · Level: advanced · Genres: dub acid, acid techno breakdowns

Quick start

Load
Echo, Roar, Limiter
Set
  • Return A Echo Left 3/16, Right 1/4, Feedback 70%, Reverb 20% in the feedback loop, HP 300 Hz / LP 4 kHz
  • Return A Roar after Echo at a low drive; sends 30% to Return B
  • Return B Echo dotted 1/8, Feedback 40%, LP 2 kHz; sends back to A at 10–20%
  • Limiter −1 dB on both returns
You should hear
Every repeat changes, so a single thrown accent becomes a new line built from repeats that keeps playing for bars.
Live edition
Suite

Beyond the dub send: put processing inside the feedback path so every repeat changes. Echo can place its Reverb in the feedback loop and has an input drive (D) stage; two Returns can also send into each other for a longer, wilder loop.

  1. Return A: Echo, Left 3/16, Right 1/4, Feedback 70%, Reverb 20% with Reverb Location set to the feedback loop (each repeat gets wetter), HP 300 Hz / LP 4 kHz. Roar after Echo at a low drive.
  2. Return A sends 30% to Return B (enable sends on returns from the mixer section). Return B: Echo dotted 1/8, Feedback 40%, LP 2 kHz. Return B sends back to A at 10–20%.
  3. Limiter at −1 dB on both returns. Map Return A's Utility Gain to a Push encoder: it is your brake.
  4. Throw single accented notes into the loop and pull the dry line out: four bars later the loop is still playing a new line built from repeats.
Cross-fed returns can run away in a few seconds. Build at low monitoring level, and never leave the session playing unattended with feedback above unity.

Freeze: Delay Freeze, Spectral Time and Beat Repeat holds

Effects: Delay, Spectral Time, Beat Repeat · Level: intermediate · Genres: acid techno, acid trance breakdowns

Quick start

Load
Audio Effect Rack, Delay, Spectral Time, Beat Repeat
Set
  • Rack Chain Selector macro picks the freeze
  • Chain 1 Delay 1/16, Freeze on via macro
  • Chain 2 Spectral Time, Freezer, fade 500 ms
  • Chain 3 Beat Repeat, Grid 1/32, Gate 1/4, Chance 100%
  • Timing freeze an accented, resonant note at its brightest point
You should hear
One moment of the squelch held as a pad, a sustained vowel or a rhythmic hold.
Live edition
Suite

Freezing a squelch turns one moment of the line into a pad or a drone. Delay's Freeze endlessly cycles the buffer and ignores new input until released (Live manual). Spectral Time's freezer holds a spectral snapshot, which smooths a squelch into a sustained vowel; Beat Repeat with a short Grid and Chance 100% gives a rhythmic hold.

  1. Freeze on an accented, resonant note at its brightest point: that is the snapshot you want to hear held.
  2. Spectral Time: Freeze on, Retrigger mode Sync with a beat-time Interval, Fade Shape Envelope with a Fade In so the held spectrum swells in rather than clicks.
  3. Automate Auto Filter after the freeze to make the held note move; the frozen spectrum otherwise sits still.

Reverb pre-delay as a rhythm

Effects: Hybrid Reverb, Reverb · Level: intermediate · Genres: deep acid, acid house, acid trance

Quick start

Load
Hybrid Reverb
Set
  • Predelay dotted 1/16 or 1/8 from the table, e.g. 180 ms or 240 ms at 125
  • Decay short, 0.8–1.5 s
  • Return high-pass 300 Hz
  • Send only the accents
You should hear
The dry note, then the reverb bloom as an extra hit off the grid of the line, not a wash.
Live edition
Suite

Set the reverb's pre-delay to a musical value and the reverb's onset becomes an extra hit in the groove: the dry note, then the bloom one 1/16 or a dotted 1/16 later. On a busy 1/16 line a 1/16 pre-delay blurs; a dotted 1/16 or 1/8 one puts the bloom off the grid of the line.

BPM1/16Dotted 1/161/8Dotted 1/8
122123 ms184 ms246 ms369 ms
125120 ms180 ms240 ms360 ms
132114 ms170 ms227 ms341 ms
140107 ms161 ms214 ms321 ms
  1. Return with Hybrid Reverb: Predelay set from the table (Hybrid Reverb's pre-delay is in ms; Reverb's too — type the value).
  2. Short decay (0.8–1.5 s), high-pass 300 Hz on the return, so the bloom is a hit, not a wash.
  3. Send only the accents: a separate Velocity-zone chain in the rack feeding a send, or automate the send per accent. Blooms on every note blur the line.

Sidechained acid: ducking, and the kick opening the filter

Effects: Compressor, Auto Filter (sidechain) · Level: intermediate · Genres: acid techno, acid trance

Quick start

Load
Auto Filter, Compressor
Set
  • Auto Filter LP 24 PRD, Sidechain External: Kick, Tapping Point Post FX
  • Envelope amount +30%, so each kick opens the filter for about 180 ms
  • Compressor Sidechain Kick, Ratio 4:1, Attack 1 ms, Release 90 ms, 2 dB GR, only if needed
You should hear
A pumping squelch where the cutoff moves with the kick pattern rather than the line, locking the acid to the drums.
Live edition
Intro and up

Two directions. Ducking the line from the kick is the usual one. The more interesting one is using Auto Filter's sidechain input from the kick to drive its envelope follower, so the cutoff moves with the kick pattern rather than the line: a pumping squelch that locks the acid to the drums.

  1. Auto Filter, External sidechain from the kick, Tapping Point Post FX. Envelope amount positive: each kick opens the filter for about 180 ms.
  2. Negative envelope amount inverts it: the filter closes on the kick and opens in the gaps — an off-beat squelch without changing a note.
  3. Add the light Compressor duck after only if the low end still clashes; 2 dB is usually enough because the line is high-passed.

General sidechain technique: Sidechain and ducking.

Resampled and chopped acid: a recorded ride becomes a new instrument

Devices: Resampling, Simpler (Slice), Drum Rack · Level: advanced · Genres: acid breaks, modern acid, IDM acid

Quick start

Load
Simpler, Drum Rack
Set
  • Record the ride to an audio track with Input set to the acid track
  • Simpler Slice mode, Slice By Beat 1/16 or Transient, then Slice to Drum Rack
  • Keep 16 slices: some open, some closed, some accents mid-wow
  • Drum Rack per-pad Pitch to transpose slices into a new line
You should hear
An instrument of squelches you can play in any order, each slice with its own cutoff, decay and accent state.
Live edition
Intro and up

A good 64-bar ride contains hundreds of distinct sounds: every note has a different cutoff, decay and accent state. Record it, slice it, and you have an instrument of squelches you can play in any order — including orders no sequencer would produce.

  1. Record the ride to audio (an audio track with Input set to the acid track, or Live 12.2's bounce commands).
  2. Drag it into Simpler, Slice mode, Slice By Beat 1/16 (each slice = one step) or Transient. Right-click → Slice to Drum Rack.
  3. Audition and keep 16 slices: some open, some closed, some accents mid-wow, a tied note or two.
  4. Program a new pattern from slices. Add per-pad Pitch in the Drum Rack to transpose slices into a new line; Simpler's Warp keeps duration if you transpose further.
  5. Resample again through a new chain: the second-generation sound is often the keeper. More on the workflow: Resampling workflow.

Part 7 — Style recipes

Each recipe is a generic build of a style, with a 1–2 bar pattern written for this page. None is a transcription of a record. Tempos are typical ranges (By ear / scene knowledge; see the genre tempo map).

Chicago 1987: raw box, long ride, almost no processing

Instrument: TD-3 or Analog · Level: intermediate · Genres: acid house · 118–124 BPM

Quick start

Load
Analog, Overdrive, Utility, Echo
Set
  • Analog saw, Split Decay rack, Res 55%
  • Overdrive Drive 15%, band 300 Hz–3 kHz
  • Return Echo 1/8 dotted, Feedback 30%, Reverb 10%
  • Take one of 64–128 bars, Cutoff and Env Mod by hand
You should hear
A dry box with little distortion and a lot of room, carried by one long continuous knob performance.
Live edition
Suite

Documented: the first acid records came from cheap second-hand 303s and experimentation rather than a planned sound (Wikipedia, Acid house; VSE). By ear: the style is a dry box, little distortion, a lot of room, a drum machine underneath, and one long continuous knob performance. The skill is restraint: leave the pattern alone for minutes.

  1. Accent chain and fixed slide from Part 1; Env Mod macro at the stock-feel range.
  2. Overdrive at low drive only. No Roar, no stacks.
  3. One take of 64–128 bars, Cutoff and Env Mod by hand. Do not edit the take beyond trimming.

Acid techno 140+: root hammer, accent runs, Multi Band grind

Instruments: Drift or TD-3 · Effects: Roar, Pedal · Level: advanced · Genres: acid techno, hard acid · 138–150 BPM

Quick start

Load
Drift, Roar, Pedal, Glue Compressor, Utility
Set
  • Drift Type I LP, Res 70%, Split Decay rack; Decay macro 120–200 ms
  • Roar Multi Band, Mid Diode Clipper 14 dB
  • Pedal Fuzz, Gain 3
  • Glue Compressor 4:1, 3 dB
  • Utility Bass Mono 150 Hz
You should hear
A one- or two-pitch hammer where runs of accents climb, with distortion supplying the variation.
Live edition
Suite

At 140 BPM a 1/16 is 107 ms, the 58% gate is 62 ms, and a 300 ms decay spans almost three steps: busy lines need shorter decays. By ear: the style lives on one or two pitches, with accent placement, the accent-sweep climb on runs, and distortion as the variation.

  1. Normal-note Decay macro 120–200 ms; accents fixed short anyway.
  2. Roar Multi Band with the Mid band carrying most of the drive, then Pedal for a second, different texture.
  3. Ride Resonance and Wow speed as the main build controls, Cutoff in 8-bar steps.

Genre frame: Hard techno, Industrial techno.

Acid trance: rolling Phrygian line, long filter build, delay as harmony

Instruments: Analog or Operator · Effects: Echo, Hybrid Reverb · Level: intermediate · Genres: acid trance, psytrance-adjacent · 136–142 BPM

Quick start

Load
Operator, Saturator, Echo, Hybrid Reverb
Set
  • Operator Saw, LP 24 PRD, Res 55%, Voices 1, Glide 50 ms
  • Saturator Soft Sine 4 dB
  • Echo 3/16, Feedback 45%, Ping Pong, LP 5 kHz
  • Hybrid Reverb send, Predelay 161 ms (dotted 1/16 at 140)
  • Cutoff a single 64-bar exponential ramp up to the break, then snap it closed
You should hear
A continuously rolling line whose delay repeats fill the gaps between notes, building over one long filter ride.
Live edition
Suite

By ear: acid trance lines roll continuously, often avoid the kick positions, and use a very long cutoff ride (32–64 bars) as the main build; the delay is set so repeats fill in harmony notes. The basic page already has a psy-style offbeat pattern; this one is a longer, melodic two-bar phrase.

  1. Keep Resonance moderate (50–60%) — the length of the cutoff ride is the drama, not the scream.
  2. Delay 3/16 so repeats land between notes; Echo's LP keeps them behind the line.
  3. Automate Cutoff in a single 64-bar exponential ramp up to the break, then snap it closed.

Genre frame: Psytrance.

Acid breaks: riffs that leave the snare alone, Amp and throws

Instruments: Meld or Analog · Effects: Amp, Cabinet, Beat Repeat · Level: intermediate · Genres: acid breaks, nu-skool breaks · 128–136 BPM

Quick start

Load
Meld, Amp, Cabinet, Beat Repeat, Echo
Set
  • Meld Squelch osc, LP Crunch 12dB, Mono Legato
  • Amp Boost, Gain 5; Cabinet 2x12
  • Beat Repeat Chance 15%, Grid 1/16, Gate 1/8
  • Throw Echo 1/4, Feedback 70%, on the last accent of every fourth bar
  • Riff rests on the snare; high-pass the acid at 80 Hz
You should hear
A short acid riff that leaves the snare alone, with occasional stutters that sound performed.
Live edition
Suite

By ear: over breakbeats the acid acts more like a riff: shorter phrases, rests on the snare (beats 2 and 4), and a call-and-response with the break. The guitar-amp chain is on the basic page; here the focus is the riff shape and the stutter.

  1. Beat Repeat at low Chance gives occasional stutters that sound performed.
  2. Throw the last accent of every fourth bar into the Echo return.
  3. High-pass the acid at 80 Hz: the break's kick and the sub own the low end in breaks.

Genre frame: Breaks and big beat.

Dub / deep acid: sparse, long decay, pre-filter drive, feedback loop

Instruments: Operator or Drift · Effects: Echo loop, Hybrid Reverb · Level: intermediate · Genres: deep acid, dub techno-adjacent · 118–126 BPM

Quick start

Load
Operator, Auto Filter, Utility, Hybrid Reverb
Set
  • Operator Saw, Flt. Drive 6 dB, LP 24 PRD, Res 40%
  • Decay 800 ms – 1.5 s on normal notes, accents short via the split-decay rack
  • Auto Filter sidechain from kick, negative env
  • Hybrid Reverb send, Predelay 180 ms at 125
You should hear
A sparse, thick but dark line whose cutoff dips on each kick and blooms between, the space doing the work.
Live edition
Suite

By ear: deep acid keeps the resonance low, the decay long, the cutoff dark, and lets the space do the work. Pre-filter drive (Part 5) suits it: thick but dark.

  1. Decay macro 800 ms – 1.5 s on normal notes; accents still short via the split-decay rack, which keeps it from washing out.
  2. Negative kick sidechain on Auto Filter: the cutoff dips on each kick and blooms between.
  3. Send only selected notes into the feedback loop.

Genre frame: Dub techno, Deep techno.

Modern lo-fi acid: drifting pitch, tape, crushed filter

Instruments: Drift, Meld · Effects: Redux, Vinyl Distortion, Echo · Level: intermediate · Genres: lo-fi house, outsider acid · 112–125 BPM

Quick start

Load
Drift, Redux, Vinyl Distortion, Echo
Set
  • Drift Drift 20–30%, Type I LP, Glide 80 ms
  • Redux Bit Depth 10, Downsample 2
  • Vinyl Distortion Tracing Model 20%, Crackle low
  • Echo Wobble 30%, Noise 15%, Feedback 25%
  • Groove swing of 55–60% from the Groove Pool
You should hear
A worn unit on a cheap recorder: wandering pitch, a duller top, crunch from low bit depth and a lazy groove.
Live edition
Suite

By ear: the modern lo-fi take sounds like a worn unit recorded to a cheap recorder: pitch that wanders, a duller top, crunch from low bit depth rather than distortion, and a slightly lazy groove.

  1. Drift's Drift control at 20–30% for unstable pitch. Glide longer (80 ms) for a lazy slide.
  2. Crush with Redux rather than distortion: a 10-bit, lightly downsampled line has grit without loudness.
  3. Echo's Wobble and Noise for tape character; a Groove Pool swing for the lazy feel. More on character: Tape, lo-fi and analog character.

Processing chain

The circuit behaviours (accent capacitor, split decay, fixed slide, gate) all live in the instrument rack, so every downstream device sees an already-correct 303 performance. Effects then only add tone and space. Keep the dry chain mono; the returns supply width.

Rack

The basic performance rack and TD-3 hardware variant are on the acid rack page.

Genre variations

Style (BPM)Circuit emulation prioritySequencer trickToneSpace
Chicago 1987 (118–124)Split decay, fixed slide, gate 58%Pitch/time accidents, then leave itOverdrive, lightOne dotted delay
Acid techno (138–150)Accent capacitor, short decayAccent runs, Random octavesMulti Band Roar + PedalShort, mono; throws only
Acid trance (136–142)Fixed slide, moderate resRolling 3-of-4, 12-step over 4/4Saturator, formant option3/16 delay, pre-delay rhythm
Acid breaks (128–136)Gate and tiesRiffs with snare rests, Beat RepeatAmp/Cabinet, Meld SquelchThrows
Dub / deep acid (118–126)Split decay with long DecaySparse, Follow Action variationsPre-filter driveFeedback loop, freeze
Lo-fi acid (112–125)Pitch drift, long glideChance and velocity deviationRedux, Vinyl DistortionEcho wobble

Pattern library

Generic 1–2 bar shapes written for this page to exercise the techniques above. They are not transcriptions. Accent = velocity 127, normal 90–100, ghost 50; tails = slide (overlap the next note).

Accent-run tester (A minor, any tempo)

Tie and slide grammar (C minor)

Two-line interlock (E minor)

Fifteen-step drifter (F minor)

Formant talker (D minor)

Chop source (G minor)

Common mistakes

Related