ABLETON 12 SOUND DESIGN ATLAS

Tribe & Hardtek (French Free Party)

The teknival sound of the French free party: tribe, hardtek and tribecore at 160–185 BPM, built from short punchy distorted kicks, interlocking tribal percussion loops, acid lines, stabs and vocal samples, written to be played live on outdoor sound systems. Thinly documented; most of the sound notes here are labelled By ear.

Difficulty
Intermediate
Live edition
Suite
Max for Live
Not needed

Tribe is the percussive heart of the French free-party sound: a short, hard kick on every beat, a rolling bass between the kicks, and above them a dense web of looped hand-drum, tom and metal percussion that gives the style its name, topped with acid lines, stabs and spoken samples. Hardtek is the straighter, more kick-and-bass-driven neighbour; tribecore pushes tribe percussion over a hardcore kick at the fast end; "mental" is the frantic, roll-heavy variant. All of it was made for one context: a teknival field or a squat where several sound systems run all night, the music is played by live acts on hardware as often as by DJs, and the rig is a stack of home-built boxes in open air. All timings below assume 175 BPM unless stated (1 bar = 1371 ms, 1/4 = 343 ms, 1/8 = 171 ms, 1/16 = 86 ms; at 165 BPM a bar is 1455 ms, at 180 a 1/16 is 83 ms).

What is documented and what is not. The history is reasonably well recorded; the sound is not. Documented: Spiral Tribe formed in London in 1990, ran free parties, and after the 1993 Castlemorton acquittals much of the group moved to mainland Europe, organising teknivals there (Wikipedia: Spiral Tribe); their label Network23 ran from 1994 to 1996 (Discogs: Network23). The first French teknival is dated to July 1993 near Beauvais, and the early French teknivals are credited to Spiral Tribe, Psychiatrics, Nomads and OQP Sound System (Wikipédia FR: Teknival, Chronologie des teknivals en France). Teknokrates is described as one of the first French sound systems, and its member Reno later ran the Expressillon label (Discogs: Reno, Expressillon). Metek is a French hardtek label run by Metek Sound System since 1995 (Discogs: Metek); Facom Unit is a French label tagged "hardtechno / tribe" and linked to Spiral Tribe and Network23 (Discogs: Facom Unit); Heretik System is a Paris collective founded in 1995 or 1996 (sources disagree) and associated with tribe and tribecore (Wikipédia FR: Heretik System, Techno Mag). Free tekno runs at about 150–185 BPM, uses a pounding repeated kick, places TV and film samples "at strategic moments", and tribe is the branch still mostly played on hardware (Wikipedia: Free tekno, an article tagged for missing citations). French Wikipedia lists "mental" as a sub-genre of tribe (Wikipédia FR: Free party). Undocumented: I found no interview, manual or feature describing how any named tribe record or live act was made, which drum machines particular crews used, or standard tempos for each sub-style. Other names sometimes linked to the scene (Total Resistance, Mackintosh) did not turn up in any source I could read, so they are left out. Everything below about kicks, percussion, bass and arrangement is By ear: listening and scene knowledge turned into Live 12 recipes, not fact about any record.

Sonic signature

BPM
Free tekno overall 150–185 (Documented, loosely). By ear: hardtek and tribe mostly 165–180, mental 175–190, tribecore 180–200.
Swing
By ear: kick and bass dead straight; percussion straight 16ths but with velocity accents that imply 3-against-4 cells. Groove comes from accent placement and loop length, rarely from timing swing.
Key feel
Minor and phrygian riffs on one or two notes; often no harmony at all beyond the acid line. Roots F–A (43–55 Hz) keep the bass in the strongest band of a stacked outdoor rig.
Dominant elements
Short distorted kick, rolling or off-beat bass, 3–6 looping percussion layers, acid line, stab or hoover riff, spoken sample, roll-and-filter builds.
Dynamics
Loud and dense: by ear −7 to −5 LUFS integrated on released records, with a constant kick. Live acts often run hotter still; the rig limiter does the rest.
Stereo image
Kick, bass, toms mono. Percussion panned but narrow: outdoor stacks are often mono or near-mono, so the groove must survive fold-down.
Form
Long, loop-based tracks (6–9 minutes by ear) arranged by muting and filtering parts, the way a live act works a groovebox.

Core elements & how to make them in Live 12

The tribe/hardtek kick: short, punchy, distorted, not tonal

Instrument: Drum Sampler + Drum Buss · Level: essential · Genres: tribe, hardtek, tekno

Quick start

Load
Drum Sampler, Drum Buss, Roar, EQ Eight
Set
  • Drum Sampler 909-type kick, Decay 140–180 ms at 175 BPM, Punch 30–50%
  • Drum Buss Drive 30–40%, Medium drive, Transients +20 to +40, Boom 20–35% tuned to the root, Decay low
  • Roar Single, Diode Clipper 20–30%; kick peaks around −3 dBFS
  • EQ Eight HP 30–35 Hz 48 dB/oct, +2–4 dB at 150–200 Hz, LP 8–10 kHz
  • Check at least 18 dB down by step 3 of each beat
You should hear
A fast, distorted punch with a hard mid knock and a short tail that leaves the second half of the beat to the bass.
Live edition
Suite

By ear, the free-party kick sits between techno and hardcore: it is distorted, but its tail is short, so it does not sing a note the way a gabber or hard techno kick does (that recipe is on the hard techno page; do not reuse it here). The kick is a fast punch with a hard mid "knock", and the space between kicks belongs to the rolling bass. Start from a drum-machine kick rather than a sine, distort it on a bus, and shorten it.

  1. Drum Sampler (12.1) loaded with a 909-type kick. Decay 140–180 ms at 175 BPM: the beat is 343 ms, so the kick ends roughly halfway through it and leaves the second half for the bass. Turn on the Punch playback effect around 30–50% for extra front.
  2. Drum Buss: Drive 30–40%, Medium drive, Transients +20 to +40. Boom 20–35% tuned with Freq to your track's root (F0 = 43.7 Hz, G0 = 49 Hz) and Decay low, so Boom adds a pitched thump, not a tail.
  3. Roar after it, Single routing, Diode Clipper 20–30%. This flattens the peak and adds the hard mid edge. Keep Roar's output trimmed so the kick track peaks around −3 dBFS.
  4. EQ Eight: HP 30–35 Hz at 48 dB/oct (outdoor rigs waste power below that), +2–4 dB at 150–200 Hz for the knock, LP 8–10 kHz to keep the click from turning to fizz on horns.
  5. Check the length on the Spectrum and in the clip: by step 3 of each beat (172 ms) the kick should be at least 18 dB down.
ParameterTribe / hardtekHard techno (for contrast)
Kick length120–180 ms250–500 ms, tonal tail
DistortionOne bus stage, mediumTwo clip stages, extreme
Bass roleSeparate bass between kicksKick tail is the bass
If the kick tail reaches the next 16th, the bass and kick blur into one rumble outdoors, where there is no room reverb to hide it but also no room to define it. Shorten first; never fix this with sidechain alone.

Two-layer kick for outdoor rigs: click layer plus body layer, phase-aligned

Instrument: Drum Rack + Operator · Level: intermediate · Genres: hardtek, tribe, tribecore

Quick start

Load
Drum Rack, Operator, Drum Sampler, Roar, Drum Buss
Set
  • Body Operator sine, pitch envelope +24 st, 30–40 ms decay, amp Decay 150 ms, low-pass 200 Hz
  • Knock short drum-machine kick, Decay 80–100 ms, Roar Diode Clipper, HP 140 Hz / LP 6 kHz
  • Click 8–15 ms of noise or rim, HP 2 kHz, low in level
  • Align nudge the Drum Sampler Start until the summed hit is louder
  • Drum Buss one, on the pad's output
You should hear
One glued kick whose mid knock you can raise on its own so it still reads far from the stack.
Live edition
Suite

A kick that sounds hard in a studio can vanish 50 metres from a stack in a field, where the high frequencies drop off with distance and wind. By ear, free-party kicks carry a pronounced mid knock that reads from far away. Build that as its own layer so you can raise it without adding sub.

  1. Body: Operator Osc A sine, pitch envelope +24 st with 30–40 ms decay, amp Decay 150 ms. Low-pass at 200 Hz so it carries only the thump.
  2. Knock: a short drum-machine kick, Decay 80–100 ms, through Roar Diode Clipper, then HP 140 Hz / LP 6 kHz so it is only the mid punch.
  3. Click: 8–15 ms of noise or a rim sample, HP 2 kHz, low in level.
  4. Align: zoom in on a bounced hit; if the body and knock start out of phase (the summed peak is lower than either alone), add Align Delay or nudge the Drum Sampler Start a few samples until the sum is louder.
  5. Sum the layers through one Drum Buss on the pad's output, not three, so the distortion glues them into one event.
Walk test: bounce the kick, play it on a small PA outdoors or in a corridor and step back 20 m. The layer you stop hearing first is the one to raise; on most rigs it will be the knock.

The hardtek rolling bass: three notes between kicks

Instrument: Operator · Level: essential · Genres: hardtek, tribe, tekno

Quick start

Load
Operator, Roar, Compressor
Set
  • Operator Osc A saw, Osc B square −12 dB; Lowpass 12 at 300–400 Hz, Resonance 20%, filter envelope 25–35%, Decay 60 ms
  • Amp envelope Attack 1 ms, Decay 70–80 ms, Sustain −inf; Voices 1
  • Notes 16ths 2, 3 and 4 of each beat on the root (F1 for a kick in F); middle note velocity 120 vs 90
  • Roar Tube Pre-amp 25–35%, post filter around 2 kHz
  • Compressor keyed from the kick, 6:1, Attack 0.1 ms, Release 40–50 ms
You should hear
A rough, fat bass filling the three 16ths after every kick, pumping on its accented middle note.
Live edition
Suite

By ear, the common free-party bass fills the three 16ths after each kick, usually on one root note, with accents that make it "pump". It is related to the psytrance roll but rougher and fatter: a saw or square with distortion, a longer note and less filter-envelope precision. (For the clean psy version and its 60 ms gate, see the psytrance page; for the hard techno off-beat bass, see hard techno.)

  1. Operator: Osc A saw, Osc B square at −12 dB (both carriers), filter Lowpass 12 at 300–400 Hz, Resonance 20%, filter envelope 25–35% with Decay 60 ms. Amp envelope Attack 1 ms, Decay 70–80 ms, Sustain −inf. Voices 1.
  2. Notes on 16ths 2, 3 and 4 of each beat, each 1/16 long, on the root one octave above the sub (F1 if the kick is tuned to F). Accent the middle note (velocity 120 vs 90) and map velocity to filter envelope amount.
  3. Roar Tube Pre-amp 25–35% with its post filter around 2 kHz: grit that reads on the tops without fizz.
  4. Compressor keyed from the kick, ratio 6:1, Attack 0.1 ms, Release 40–50 ms. At 175 BPM a 16th is 86 ms, so the bass is fully back before its first note.

Tribal percussion loops: slicing hand drums in Simpler

Instrument: Simpler (Slice) / Drum Rack · Level: essential · Genres: tribe, tribecore, mental

Quick start

Load
Simpler, Drum Rack, Saturator, Glue Compressor, EQ Eight
Set
  • Slice your hand-drum loop: Slice to New MIDI Track, Transient, Drum Rack preset
  • Pattern your own 1-bar pattern: deep strokes on the off-beats, slaps on 16ths 2 and 4
  • Simpler per pad: Release shorter, Fade on; bass strokes on the root or its 5th
  • Group Saturator Medium Curve, Drive 6 dB; Glue Compressor 4:1, Attack 1 ms, Release 0.1 s
  • EQ Eight high-pass at 100–130 Hz
You should hear
A sliced hand-drum loop rebuilt into one punchy, distorted block that stands next to the kick.
Live edition
Standard and up

The tribe name comes from the percussion: by ear, looped djembe, conga, darbuka, tom and shaker phrases, often sourced from world-percussion recordings and sample CDs and run through the same distortion as the kick. The Live 12 route is to slice a hand-drum loop, rebuild it at 175 BPM, and re-sequence the slices so the phrase belongs to your track.

  1. Use percussion you recorded or licensed (sample packs that grant use). Drop the loop in a track, right-click > Slice to New MIDI Track, choose Transient slicing and the Drum Rack preset. Each hit becomes a pad.
  2. Delete the original MIDI; write your own pattern from the pads, usually 1 bar, with the deep "doum" strokes on the off-beats and the slaps on 16ths 2 and 4 of each beat.
  3. On each pad's Simpler, shorten Release and turn Fade on so slices do not click; transpose the bass strokes so they sit on your root or its 5th.
  4. Group the pads and push them through Saturator Medium Curve and a fast Glue Compressor: the loop becomes one punchy block that can stand next to a distorted kick.
  5. High-pass the group at 100–130 Hz. Hand-drum bass strokes carry real low end that will fight the rolling bass.
Sampling a commercial world-music record and releasing it is a clearance problem, whatever the scene's free-party ethic. Record your own percussion, or use packs whose licence covers release.

Synthesised toms and congas tuned to the key

Instrument: Operator / Collision · Level: intermediate · Genres: tribe, mental, tribecore

Quick start

Load
Operator, Collision, Corpus, Tuner
Set
  • Operator tom Osc A sine, Pitch Env +12 st, 50–80 ms decay, a breath of Osc B noise, Amp Decay 150–250 ms
  • Tuning three pads on the root, 5th and octave: F2, C3, F3 for F, checked with Tuner
  • Collision conga Mallet, high Stiffness, a little Noise, Resonator 1 Membrane, short Decay
  • Corpus Membrane at 15–25% wet on the tom group
You should hear
Tuned synthetic toms and congas that turn the percussion into a second bassline in the 100–400 Hz band.
Live edition
Suite

When the loops are too clean or too recognisable, synthesise the drums. A sine with a pitch drop becomes a tom; a membrane model becomes a conga. Tuned to the key, they turn the percussion into a second bassline in the 100–400 Hz band.

  1. Operator tom: Osc A sine; Pitch Env amount +12 st with a 50–80 ms decay so each hit "dooms" downward; a breath of Osc B noise for the stick. Amp Decay 150–250 ms. Make three pads: low, mid, high.
  2. Tune the three pads to the root, 5th and octave above the bass (for F: F2, C3, F3 are 87, 131 and 175 Hz). Check each with Tuner after the pitch envelope settles.
  3. Collision conga: Mallet with high Stiffness, a little Noise, Resonator 1 Membrane with short Decay. Velocity to Mallet Stiffness gives slap vs open tone from one pad.
  4. Corpus Membrane at 15–25% wet on the tom group adds a shared skin resonance so the synthetic drums sound like one kit.
Pad (key F)NoteHzRole
Low tomF287.3Answers the bass, off-beats
Mid tomC3130.8Main tribal figure
High tom / congaF3174.616th fills and rolls

The tribe groove: 3-step cells and odd clip lengths against the 4/4 kick

Tool: Session clips / Groove Pool / Velocity · Level: intermediate · Genres: tribe, mental

By ear, the hypnotic quality of tribe comes from percussion phrases that do not line up with the bar: a 3-step or 6-step accent pattern cycling over a 16-step kick, so the downbeat of the percussion lands somewhere new every bar and comes home every three bars. Live makes this trivial with clip loop lengths.

  1. Put each percussion part in its own Session clip. Set the conga clip's loop length to 3/16 (Loop Length 0.0.3), the tom to 6/16, the rim to 5/16. Kick, bass and shaker clips stay at 1 bar.
  2. Launch all together; the parts phase against each other and realign after their lowest common multiple of steps (a 3 and a 16 meet every 48 steps, three bars).
  3. For Arrangement view, record the Session performance in, or use the 12.x Recombine and Span transformations on a 1-bar clip to bake the offset into fixed notes.
  4. Keep timing straight and do the groove with velocity: accents at 120, ghosts at 50–60. A swing groove on the percussion fights the straight kick at this tempo.
The Euclidean generator in the MIDI clip view is a quick way to try 5-in-16, 7-in-16 and 3-in-8 percussion lines; set each to a different rotation so their accents do not coincide.

The percussion bus: crushed together, parallel, ducked to the kick

Effect: Drum Buss / Glue Compressor / Audio Effect Rack · Level: intermediate · Genres: tribe, hardtek, tribecore

Quick start

Load
Audio Effect Rack, Drum Buss, Glue Compressor, Hybrid Reverb, Compressor
Set
  • Clean chain EQ Eight HP 120 Hz, Utility Width 70%
  • Crush chain Drum Buss Drive 50–70%, Hard drive; Glue 10:1, fastest attack; 6–10 dB under the clean chain
  • Room chain very short room, high-passed at 400 Hz, low in level
  • Compressor after the rack, keyed from the kick, 3:1, Attack 1 ms, Release 50–70 ms
You should hear
Five or six percussion layers glued into one dense, slightly distorted bed that makes space for the kick.
Live edition
Suite

With five or six percussion layers at 175 BPM, a clean mix sounds like a drum lesson. By ear, tribe percussion is glued into one dense, slightly distorted bed that pumps with the kick. Do it with a parallel crush so the transients survive.

  1. Group all percussion tracks; put the rack above on the group.
  2. Crush chain: Drum Buss Drive 50–70% with the Hard drive type, then Glue at 10:1 with the fastest attack. It flattens everything into a loud, sustained texture; blend it 6–10 dB under the clean chain.
  3. Room chain: a very short room, high-passed at 400 Hz, low in level. It makes slices recorded in different spaces sound like one kit.
  4. After the rack, a Compressor keyed from the kick, 3:1, Attack 1 ms, Release 50–70 ms. Not a pumping effect, just space for the kick knock.
Width on the percussion bus beyond about 70–80% is wasted on a mono stack and can cancel parts when the rig sums left and right. Check with Utility Width 0.

Acid in tribe: one-note squelch loops over the roll

Instrument: Drift / Analog / External Instrument · Level: intermediate · Genres: tribe, acidcore, tekno

Quick start

Load
Drift, Roar, Auto Filter, Echo
Set
  • Drift Osc 1 Saw, LP Type II, Frequency 350–500 Hz, Resonance 65–80%; Env 2 → frequency, Decay 120–180 ms; Mono, Glide around 40 ms
  • Notes octave 2, slides between overlapping notes, accents on velocity
  • Roar Serial, Tube Pre-amp then Diode Clipper; high-pass at 200–250 Hz after
  • Echo 1/8 dotted, feedback 30–40%, filtered
  • Ride Frequency and Resonance on two macros for 32–64 bars
You should hear
A one- or two-note squelch loop above the bass, its cutoff and resonance ridden for minutes.
Live edition
Suite

Acid is everywhere in free-party music; the Tsugi feature on Spiral Tribe puts it right next to "tribe techno" in describing their parties (Documented, as a scene description). By ear, tribe acid is less melodic than acid trance: a 1- or 2-bar loop, often on one or two notes, played above the bass register and ridden with cutoff and resonance for minutes. The full 303 model is on Acid 303 advanced; here is the tribe placement.

  1. Drift: Osc 1 Saw, filter LP Type II (the steeper one), Frequency 350–500 Hz, Resonance 65–80%. Env 2 to filter frequency, Decay 120–180 ms. Voice mode Mono with Glide around 40 ms.
  2. Write in octave 2 (F2 = 87 Hz) so the line sits above the bass, with slides between overlapping notes and accents mapped to velocity.
  3. Roar Serial: Tube Pre-amp then Diode Clipper. High-pass at 200–250 Hz after it so the acid never adds bass.
  4. Echo at 1/8 dotted (257 ms at 175), feedback 30–40%, filtered: the repeats fill the gaps in a one-note loop.
  5. Ride Drift's Frequency and Resonance on two macros for 32–64 bars; the ride is the composition.
If you own a TB-303 clone, play it through External Instrument and record long takes with cutoff rides; tribe live acts are reported to play hardware (Documented, generally), and the knob rides are easier by hand.

Stabs and the looped riff: resampled, pitched, one bar

Instrument: Wavetable / Simpler · Level: intermediate · Genres: hardtek, tribe, tekno

Quick start

Load
Wavetable, Simpler, Redux, Auto Filter
Set
  • Wavetable short minor-chord stab, amp Decay 100–150 ms; resample one hit
  • Simpler One-Shot, Voices 1, played on one or two pitches
  • Redux 10–12 bit, small downsample
  • Auto Filter bandpass, LFO synced to 3/16
You should hear
A gritty resampled stab riff on two pitches whose tone moves against the bar like the percussion.
Live edition
Suite

By ear, the melodic hook of a hardtek track is often a one-bar riff of short stabs, sometimes a hoover, looped for the whole drop. The hoover and the rave stab are built on the hard techno page (rave stab); the tribe-specific part is how the stab is played: resampled to audio, played from Simpler, and treated as a percussion part.

  1. Make a short minor-chord stab (Wavetable, amp Decay 100–150 ms). Resample one hit and load it into Simpler, One-Shot mode, Voices 1 so new hits cut old ones.
  2. Play the riff from Simpler on one or two pitches; repitching the sample shifts its formant, which is the sampler sound the genre grew up with.
  3. Redux 10–12 bit and a small downsample for grit; Auto Filter bandpass with an LFO synced to 3/16 so the tone moves against the bar like the percussion.
  4. Program the riff on 16ths with gaps where the kick lands; let the bass keep its three notes.

Spoken samples at strategic moments

Instrument: Simpler / Beat Repeat · Level: intermediate · Genres: hardtek, tekno, mental

Quick start

Load
Simpler, Auto Filter, Saturator, Beat Repeat
Set
  • Simpler a phrase you have rights to, Classic, Warp off, Transpose −3 st
  • Auto Filter band-pass around 1–1.5 kHz; Saturator Analog Clip 5 dB
  • Placement the full phrase once in a breakdown with the kick out
  • Beat Repeat Chance 0%, automated to 100% for the last 2 bars of a build; Grid 1/16, then 1/32
You should hear
A “megaphone over the rig” voice that cuts through without level, then falls into a stutter at the build.
Live edition
Intro and up

Free tekno places "samples from TV, films and popular culture" at key points (Documented, from a poorly sourced article); French Wikipedia's hardtechno entry also notes vocal samples on political and social themes (Documented). By ear, a phrase is used once or twice per track, often over a breakdown, and then chopped into a stutter at the build.

  1. Use your own recordings, a friend's voice, public-domain broadcasts, or cleared material. Load the phrase in Simpler with Warp off so it keeps its natural speed and pitch drops with Transpose.
  2. Band-pass it around 1–1.5 kHz and clip it: a "megaphone over the rig" sound that cuts through a dense mix without needing level.
  3. Place the full phrase once, in a breakdown, with the kick out. Bring a single word back later as a stab.
  4. Beat Repeat after Simpler with Chance at 0%. Automate Chance to 100% for the last 2 bars of a build, Grid 1/16, then 1/32 for the final bar; Pitch Decay above zero makes the stutter fall.
  5. Echo with Duck on so the throws bloom only after the phrase ends.

Mental builds: accelerating rolls, rising pitch and the missing kick

Tool: Beat Repeat / Velocity / automation · Level: advanced · Genres: mental, tribe, tribecore

Quick start

Load
Auto Filter, Beat Repeat
Set
  • MIDI roll kick and tom in doubling densities over 4 or 8 bars, velocity 70 to 127
  • Auto Filter on the drum group: high-pass from 40 to 400–600 Hz across the build
  • Beat Repeat final bar: Interval 1/4, Grid 1/32, Chance 100%, Pitch −2 to −5 with Pitch Decay
  • Drop kick and bass out for one bar, then everything back with the filter fully open
You should hear
Rolls doubling bar by bar while the bass vanishes, a bar without kick, then everything slams back.
Live edition
Intro and up

Mental is listed as a sub-genre of tribe (Documented, name only). By ear it is the frantic end: percussion and kick rolls that double in density bar by bar, filters and pitch climbing, and the kick pulled out for a bar before it slams back. Build it from MIDI rolls and two automation lanes.

  1. Roll in MIDI first: write the kick and a snare or tom in doubling densities over 4 or 8 bars. Use Velocity Shaper or draw a ramp from 70 to 127.
  2. On the drum group, Auto Filter high-pass sweeping from 40 to 400–600 Hz across the build: the bass vanishes, the tension rises.
  3. Beat Repeat on the group for the final bar: Interval 1/4, Grid 1/32, Chance 100%, Pitch −2 to −5 with Pitch Decay so the repeats bend.
  4. Drop the kick and bass for one bar (silence or a spoken word), then return everything at once with the filter reset to fully open on the downbeat.
  5. Mental tracks repeat this every 32 bars; vary the length (2, 4, 8 bars) so the crowd cannot predict it.
At 175 BPM a 1/32 is 43 ms; a kick roll at that rate with a 150 ms kick is just noise. Shorten the kick (Drum Sampler Decay automated down) during the roll, then restore it on the drop.

Tribecore: tribe percussion over a hardcore kick

Instrument: Operator kick + tribe kit · Level: advanced · Genres: tribecore, frenchcore-adjacent

Quick start

Load
Operator, Roar, EQ Eight
Set
  • Kick the tonal hard techno kick at 190 BPM, amp Decay 200–240 ms; rolling bass muted
  • Roar Serial, Diode Clipper → Tri Fold
  • EQ Eight HP 35 Hz; cut 300–400 Hz by 2–4 dB
  • Percussion tribe bus and 3-step cells kept; shaker halved to 8ths
You should hear
Tribe percussion and acid over a longer, tonal hardcore kick whose tail plays the bass note.
Live edition
Suite

Heretik System is associated with tribecore alongside tribe and breakcore (Documented, style tags only). By ear, tribecore keeps the tribe percussion and acid but replaces the short kick with a longer, tonal, hardcore-style kick at 180–200 BPM, and drops the separate rolling bass. That makes it a hybrid of this page and the hardcore kick-as-bass approach.

  1. Build the tonal kick from the hard techno page, but at 190 BPM a beat is 316 ms, so amp Decay 200–240 ms. Its tail now plays the bass note; mute the rolling bass track.
  2. Cut 300–400 Hz from the kick by 2–4 dB: that band belongs to the toms and congas in tribecore.
  3. Keep the tribe percussion bus (above) and the 3-step cells; at this tempo halve the shaker density to 8ths or it turns to hiss.
  4. Acid and stabs move up an octave to escape the kick's harmonics.

Metal hits, sirens and noise: the squat and field textures

Instrument: Simpler / Corpus / Operator · Level: intermediate · Genres: tribe, tekno, mental

Quick start

Load
Simpler, Corpus, Saturator, Operator, Echo
Set
  • Simpler your own metal recordings, Slice by Transient
  • Corpus Pipe, tuned to the root, Decay 35%, Dry/Wet 40%; Saturator Hard Curve 6 dB
  • Placement 3/16 or 5/16 cycles, low in level
  • Siren Operator square, LFO 4 Hz square → pitch ±5 st; Auto Filter BP 1.8 kHz
  • Echo 3/16
You should hear
Short metal clanks ringing on the root as flavour, and a two-tone alarm siren under the build.
Live edition
Suite

By ear, tribe and tekno tracks use found-metal hits, industrial clanks and alarm-like sirens as percussion and punctuation, a texture that suits warehouse and squat settings. Make them from your own recordings, tune them with Corpus, and keep them short.

  1. Record metal objects with a phone if needed; transient-slice them in Simpler. Corpus in Pipe or Plate mode with MIDI Frequency sidechain (or Tune by hand) makes each hit ring on the root.
  2. Use metal hits on 3/16 or 5/16 cycles like the other percussion, low in level: they are flavour, not rhythm.
  3. Siren: Operator square with the LFO on pitch in square shape gives the two-tone alarm; sine shape gives a wail. Band-pass and clip it, play it as a long note under the build.
  4. Echo at 3/16 (257 ms at 175, same as a dotted 1/8) puts the repeats on the tribe grid.

Playing it live: the hardware-style Session set

Tool: Session view / Push / Follow Actions · Level: intermediate · Genres: tribe, hardtek, tekno

Quick start

Load
Auto Filter, Beat Repeat, Glue Compressor, Limiter
Set
  • Session one track per role, 4–8 one-bar clips each, global launch quantisation 1 bar
  • Master rack Auto Filter HP 12 at 20 Hz; Beat Repeat Chance 0%, Grid 1/16; Glue 2:1, 1–2 dB; Limiter Ceiling −0.5 dB
  • Macros Sweep 20 Hz → 800 Hz, Roll Chance 0 → 100%, Roll Rate 1/8 → 1/32, Bend Pitch 0 → −6
  • Follow Actions bass clips Next with 25% chance of Other
You should hear
A hardware-style live act: a few loops worked by hand for an hour, with sweeps and rolls on the master.
Live edition
Standard and up

Tribe is the branch of tekno that is still mostly played on hardware (Documented, from an article tagged for missing citations). A live act at a free party works a few loops for an hour, muting, filtering and rolling. Set Live up the same way: few tracks, many short clips, everything on hands-on controls, and no arrangement.

  1. One track per role: kick, bass, three percussion, acid, stab, sample. Each track gets 4–8 clips of one bar (or odd lengths for percussion), all in the same key.
  2. Set the global launch quantisation to 1 bar; percussion clips with odd loop lengths keep phasing even when relaunched.
  3. Map on Push: Drift cutoff and resonance, the percussion Crush macro, the master high-pass, Beat Repeat Chance, the vocal throw send, and kick Decay.
  4. Follow Actions on the bass clips (Next with 25% chance of Other) so the bass varies without your hands.
  5. Rehearse the build moves (kick out, high-pass sweep, roll) until they are physical. Record the set; the best 8 minutes is your track.

Mixing for an outdoor free-party rig

Processing · Level: advanced · Genres: tribe, hardtek, tekno

Quick start

Load
EQ Eight, Glue Compressor, Saturator, Limiter, Utility
Set
  • EQ Eight outdoor tilt: low cut 30 Hz, +1.5 dB at 60 and 250 Hz, −2.5 dB at 3500 Hz
  • Glue Compressor 4:1, Attack 3 ms, Release Auto, 2–3 dB
  • Saturator Analog Clip 1–2 dB on the peaks; Limiter Ceiling −0.5 dB
  • Utility Bass Mono at 120 Hz; check with Width 0
  • Loudness master around −7 LUFS
You should hear
A mix with enough low-mid body for a field, no 2–5 kHz pain on horns, and headroom left for the crew's limiter.
Live edition
Standard and up

The general sound-system theory (mono sub, headroom, crest factor, crossovers) is on Sound system mixing. Outdoors adds two things by ear: there is no room to build up the low mids, so the mix sounds thinner than in a studio; and at high level a horn-loaded top turns 2–5 kHz into pain. Mix with those in mind.

  1. Master chain: EQ Eight (tilt above) → Glue Compressor 4:1, Attack 3 ms, Release Auto, 2–3 dB → Saturator Analog Clip 1–2 dB on the peaks → Limiter, Ceiling −0.5 dB.
  2. Utility Bass Mono at 120 Hz on the master. Many free-party stacks are run in mono; check the whole track with Utility Width 0 and make sure no percussion disappears.
  3. Put Spectrum on the master and watch 2–5 kHz in the busiest section: the acid, the slaps and the vocal should not all peak there at once. Dynamic EQ is not stock; use EQ Eight's band with a Compressor in an Audio Effect Rack split, or simply arrange them apart.
  4. Reference at low level on a small speaker outdoors if you can; what survives a balcony survives a field.
Outdoor PAs at teknivals are often run by the crew, not an engineer, and pushed hard. A master already at −5 LUFS gives their limiter nothing to work with and the kick goes flat first. Leave the DJ/live master around −7 LUFS.

Tempo, warping and blending loops at 175

Tool: Warp modes / Tuner · Level: essential · Genres: tribe, hardtek, tribecore

Quick start

Load
Tuner
Set
  • Tempo 170–178 for hardtek and tribe, decided first and not changed
  • Hand-drum loop Beats, Preserve Transients 1/16, Loop Off; big stretches sliced to MIDI
  • Spoken phrase Warp off, or Complex Pro with Formants 100%
  • Acid or riff Re-Pitch, then Transpose and Detune checked with Tuner
  • Texture Texture mode, Grain Size 60–100
You should hear
Loops from any tempo sitting at 175 without smeared transients, and acid that repitches like an old sampler.
Live edition
Intro and up

Percussion loops, spoken samples and old drum-machine recordings arrive at every tempo. At 175 BPM, warp artefacts on percussion are obvious, so choose the mode per material.

MaterialWarp modeSetting
Hand-drum loop, small stretchBeatsPreserve Transients, 1/16, Loop Off
Hand-drum loop, big stretchSlice to MIDI insteadTransient slicing, re-sequence
Spoken phraseOff, or Complex ProFormants 100% if pitched
Acid or riff recordingRe-PitchPitch follows tempo, as on a sampler
Long texture, field recordingTextureGrain Size 60–100
  1. Decide the tempo first and do not change it: 170–178 for hardtek and tribe, 185+ for mental and tribecore.
  2. Loops recorded at 120 to 140 BPM stretch badly to 175 in Beats mode; slice them (see percussion loops) instead.
  3. Re-Pitch mode on an acid or stab loop gives the sampler-era pitch-with-speed effect; tune the clip afterwards with Transpose and Detune, checking with Tuner.
Tempo maths: 175 BPM gives 343 ms per beat, 171 ms per 1/8, 86 ms per 1/16 and 257 ms per dotted 1/8. At 190 BPM: 316, 158, 79 and 237 ms.

Notes & harmony

By ear, harmony is minimal: one root for the whole track, a bass that rarely leaves it, an acid line that uses the octave, minor 3rd, 5th and a flat 2nd, and stabs that are one minor chord repitched. Live 12's clip Scale set to Phrygian or Minor on the root keeps acid, stabs and tuned toms together; tune the toms to root and 5th, as in the tom recipe. Keys F, F#, G and A put the bass root (an octave above the kick fundamental) at 87–110 Hz, in the punchiest band of a stacked rig.

Scale on FNotesUse
PhrygianF Gb Ab Bb C Db EbAcid, dark stabs
Natural minorF G Ab Bb C Db EbHoover riffs, less tension
Minor pentatonicF Ab Bb C EbTuned toms and congas, never clashes

Groove & programming

Write the kick, bass and one percussion loop first and play them loud. If those three do not move you at 175, adding acid will not help.

Arrangement template

By ear, tribe and hardtek tracks are built like a recorded live set: a loop that runs for a long time, with parts entering and leaving every 16 bars. The intro is kick and one percussion loop for mixing. Groove 1 adds the bass and more loops, then the acid with a slow filter ride. The break removes kick and bass for a spoken phrase over toms; the build is a high-pass sweep and a roll, with the kick missing for the last bar. Groove 2 brings everything back. The mental section replaces the steady kick with doubling rolls and short gaps. The outro strips back to kick and loop for the next DJ or act.

Mix & master targets

Signature rack

Sub-styles

Sub-styleBPM (by ear)DrumsBass / melodyStatus
Early free tekno (Spiral Tribe era)140–160Drum-machine kicks, breakbeat hardcore traces, acidAcid, stabs, rave samplesLineage documented (Wikipedia, Discogs); sound by ear
Hardtek165–180Short distorted kick, off-beat hat, clapRolling bass, stab or hoover riff, spoken samplesName documented (Wikipedia, Metek); sound by ear
Tribe165–180Kick plus dense looped hand-drum, tom and metal percussionRolling bass, acid, minimal riffsName and hardware tradition documented (Wikipedia, Facom Unit); sound by ear
Mental175–190Constant rolls, kick drop-outsAcid and noise, little melodyName documented (Wikipédia FR); sound by ear
Tribecore180–200Tribe percussion over a tonal hardcore kickKick tail as bass, acidName documented (Wikipédia FR); sound by ear
Acidcore180–200Hardcore kickDistorted acid as the leadName documented (Wikipédia FR); see Acid 303 advanced
Frenchcore (neighbour)190–210Tonal hardcore kickSamples, melodiesDescribed as hardcore meeting hardtekno (Wikipedia); covered on Hard techno & hardcore

Common mistakes

Related