ABLETON 12 SOUND DESIGN ATLAS

Industrial Dub

Dub’s methods turned on industrial, post-punk and noise material: distorted subs that stay subs, metal and machinery as the rhythm section, send effects pushed into feedback, tape saturation as glue and a slow 60–90 BPM or 140 half-time pulse, built and performed in Live 12.

Difficulty
Intermediate
Live edition
Suite
Max for Live
Not needed

Industrial dub is not a sound so much as a procedure: take the dub engineer’s tools (mutes, sends, tape delay, spring reverb, the mixing desk played live) and point them at material that reggae never used: distorted bass, sheet metal, factory loops, shortwave radio, post-punk guitar, noise. The lineage runs from the On-U Sound circle in London around Adrian Sherwood (Tackhead, Mark Stewart, African Head Charge, Dub Syndicate) through the Birmingham and London isolationist scene of the 1990s (Scorn; Kevin Martin’s God, Ice, Techno Animal and later The Bug), the tape-and-percussion dub of Muslimgauze, the harder sound-system side of UK dub (Zion Train and the steppers crews), and on to the post-punk minimalism of Raime, the cassette-machine dub of Ekoplekz and today’s crossovers with industrial and dub techno. What unites them physically: a sub that is enormous and often distorted above its fundamental, very little in the 200–500 Hz range, a harsh, metallic and noisy top that the send effects keep smearing into space, and tempos slow enough for the echoes to be heard as parts. This page assumes the basics on Dub reggae (riddims, one-drop, spring and tape delay returns, the siren), Industrial, noise and EBM (distortion stacking, contact mics, machine tape loops, noise walls) and Industrial techno (distorted kick, rumble, Corpus metal). It teaches what happens when you combine them. Facts about artists and records are labelled Documented with a link or By ear (listening analysis, not fact). Timings: at 70 BPM a bar is 3429 ms, 1/4 = 857 ms, 1/8 = 429 ms, dotted 1/8 = 643 ms; at 140 BPM a bar is 1714 ms, 1/16 = 107 ms; at 80 BPM a bar is 3000 ms; at 90 BPM a bar is 2667 ms.

Sonic signature

BPM
60–90 for the slow, Scorn and On-U lineage (often 65–80); 140 felt at 70 for the Bug and dubstep-adjacent half-time; 120–132 for industrial dub techno. Pick the tempo for the delay: at 70 BPM a dotted 1/8 repeat is 643 ms, long enough to hear each repeat as a note.
Swing
Two schools. On-U and Tackhead feel: played funk timing with a straight machine laid over it. Isolationist feel: rigid machine drums with the swing put into the echoes and percussion loops.
Key feel
One root and its flat 2nd, minor drones, tritones, cluster chords from distortion; often no chords at all. Roots E–G (41–49 Hz) for the sub.
Dominant elements
Sub with distorted harmonics, a second “talking” bass, slow heavy drums, metal and machinery loops, speech or dread vocal fragments, sirens made of feedback, send effects as the arrangement.
Dynamics
Loud but not flat: −10 to −7 LUFS integrated, crest factor kept by the arrangement (mutes, drops to sub only). Distortion is in the sounds, not on the master.
Stereo image
Sub, kick and the distorted sub band mono below 150 Hz. Metal, feedback and returns wide. Many classic mixes are near-mono with a wide return.
Space
Absence is the composition: a whole bar of echo with no source, the drums cut for a feedback squeal, the bass dropping out under a voice.

Core elements & how to make them in Live 12

The distorted sub that stays a sub: split the band, dirty only the top

Instrument: Operator + Roar (Multiband) · Level: essential · Genres: The Bug, Scorn, Techno Animal, industrial dub techno

Quick start

Load
Operator, Audio Effect Rack, EQ Eight, Pedal, Roar
Set
  • Operator Osc A sine only, Voices 1, Glide 40–80 ms, Amp attack 10 ms, Release 80 ms; line in E0–C1
  • Fundamental chain EQ Eight LP at 70 Hz, 48 dB slope
  • Grit chain HP 80 Hz 48 dB, then Pedal Fuzz or Roar Diode Clipper until the mid band snarls soloed
  • After the distortion high-pass again at 90 Hz
  • Phase check master Utility Width 0, toggle Grit; the fundamental must not drop
You should hear
A sub you feel as clean pressure and hear as a growl, without the limiter pumping or the system farting.
Live edition
Suite

The signature weight of industrial dub is a sub you feel as a clean pressure and hear as a growl. Done in one distortion, the fundamental clips, the limiter pumps and the system farts. Done properly, the fundamental below about 70 Hz stays a sine and only the band above it is driven. Mick Harris has said he likes basses dirtied with fuzzy overdrive and heavy distortion for grit (Documented, The Quietus, 2021); how any record split its bands is undocumented, so this is a method, not a reconstruction.

  1. Operator, Osc A sine only, Voices 1, Glide 40–80 ms, Amp attack 10 ms, Release 80 ms. Write the line in E0–C1 (41–65 Hz).
  2. Group the sub into an Audio Effect Rack with three chains (or use Roar Multiband with Low amount 0). Fundamental: EQ Eight LP at 70 Hz with the 48 dB slope.
  3. Grit: HP 80 Hz 48 dB, then Pedal in Fuzz mode or Roar Diode Clipper. Drive until the mid band snarls on its own when soloed.
  4. After the distortion, high-pass again at 90 Hz. Distortion makes new low frequencies (intermodulation); this second filter keeps them out of the clean band.
  5. Check phase: Utility on the master at Width 0, solo the bass group, toggle the Grit chain. The fundamental level must not drop when Grit comes in; if it does, raise the Grit HP or flip its phase (Utility Phase L+R) and compare.
Do not put Roar or Pedal on the full sub with a high drive. The fundamental becomes a square-ish wave whose peaks hit the limiter first; you lose 3–6 dB of perceived weight for every dB of distortion you hear.

The talking bass: a second, melodic bass over the sub

Instrument: Analog / Drift + Pedal + Amp · Level: intermediate · Genres: Scorn, On-U, post-punk dub

Quick start

Load
Drift, Pedal, Amp, Cabinet, Auto Filter
Set
  • Drift saw plus a pulse −12 st, low-pass around 800–1000 Hz, short filter envelope, Glide 40–60 ms
  • Pedal Fuzz, Gain 45%, Mid +4 dB
  • Amp and Cabinet Bass model; 4x10 Bass
  • EQ high-pass at 120 Hz, 48 dB slope
  • Auto Filter BP 1.2 kHz, Env +30%
You should hear
A high, melodic fuzz bass that speaks harder on harder notes, riding over the sub and meeting it on downbeats.
Live edition
Suite

Post-punk bass players (Jah Wobble is the reference Harris and Martin both name) played dub lines high and melodic. Harris describes building melodies from several basses, one of them a “talking bass” (Documented, The Quietus, 2021). In Live: the sub holds the root, a second bass in the 2nd octave plays the riff with a fuzz and a cabinet, and they meet only on downbeats.

  1. Drift (or Analog): saw plus a pulse an octave down, low-pass around 800–1000 Hz, short filter envelope so each note speaks. Glide 40–60 ms.
  2. Pedal in Fuzz mode at moderate gain, then Amp (Bass model) and Cabinet: the speaker model removes the fizz above 4 kHz that makes software fuzz sound cheap.
  3. High-pass at 120 Hz with the 48 dB slope. The sub owns everything below.
  4. Auto Filter band-pass with envelope follower so harder notes open: the “talk”. Automate the band-pass frequency between sections rather than changing the riff.
Play the riff on a keyboard and keep the timing. Harris has said the strict drum-machine patterns on one record lacked the swing he wanted (Documented, same interview). A played bass over a rigid kit is the classic industrial dub tension.

Playing the mixer: the mute matrix and wet-dry contrast

Tool: Session view mixer + Macros + Push · Level: essential · Genres: On-U, The Bug live, all

Sherwood describes the final mix as something he plays by hand on an analogue desk, planning moves a few bars ahead, using sudden dry moments against drenched ones to build and release tension (Documented, The Tonearm, 2025): “I’m always finishing it, doing an analog mix with my hands.” The basic send-and-throw setup is on Dub FX: the desk approach; here is the industrial version, where the material being muted is noise and metal and the contrast is between bone dry and fully fed back.

  1. Bounce or group the parts into 6–8 stems. One track each, all sends at −inf, all faders at unity.
  2. Map track Activators (or volumes) to Push buttons in Mix mode, or to a MIDI controller set to momentary for throws and toggle for mutes.
  3. Build a “Dry” macro on the returns: one knob that pulls all three return volumes to −inf. A dry cut for one beat before a throw is the move that separates dub from reverb.
  4. Record into Arrangement in one or three passes (Sherwood describes making several mixes and editing between them; same source). Keep the best take; edit between takes at bar lines.
Mark nothing on the controller. Sherwood says he learns how a tune sits across the desk instead (Documented, same Tonearm piece). In practice: run the mute matrix ten times before recording; the arrangement comes from memory, not from labels.

The feedback matrix: returns that feed each other

Tool: Return tracks with return-to-return sends · Level: advanced · Genres: industrial dub, isolationist, noise dub

Quick start

Load
Echo, Hybrid Reverb, Roar, EQ Eight, Limiter
Set
  • Return A Echo, Sync, L 1/8 dotted, R 1/4, Feedback 40–50%, HP 300 Hz, LP 4 kHz, Wobble 15%
  • Return B Hybrid Reverb, Springs impulse, Decay 2–3 s
  • Return C Roar, Feedback routing, Tube Preamp or Diode Clipper
  • Sends A → B and B → C at −12 dB; ride C → A around −20 dB
  • Every return Limiter at −6 dB ceiling, EQ Eight HP 150 Hz 48 dB
You should hear
One thrown sound turning into a self-playing loop that decays or sustains as you ride a single send.
Live edition
Suite

Classic dub feedback is one tape delay running away (see Feedback runaway). Industrial dub crosses the returns: the delay feeds the reverb, the reverb feeds a distortion return, and the distortion feeds back into the delay. The loop becomes a self-playing instrument you steer with three send knobs. In Live, return tracks can send to other return tracks; those sends are inactive by default and are enabled from the send knob’s context menu.

  1. Three returns. A: Echo (Sync, L 1/8 dotted, R 1/4, Feedback 40–50%, filter HP 300 Hz LP 4 kHz, Wobble 15%). B: Hybrid Reverb with a Springs impulse, Decay 2–3 s. C: Roar with Feedback routing, Tube Preamp or Diode Clipper.
  2. Enable A’s send to B, B’s send to C and C’s send to A. Start them all at −inf.
  3. Put a Limiter at −6 dB ceiling and an EQ Eight (HP 150 Hz 48 dB) on every return. The HP is what stops the loop turning into a sub drone.
  4. Throw one sound into A. Raise A → B and B → C to −12 dB. Now ride C → A slowly: below about −20 dB the tail decays; above it the loop sustains and starts pitching to whatever the Roar feedback time favours.
  5. Map C → A to a macro or encoder, and Return A Echo Feedback to another. Two knobs, one instrument. Kill everything with the Dry macro from the mute matrix above.
Monitor at low level while setting this up. A return loop can go from silence to full scale in under a second, and the Limiter only saves your speakers if it sits after the last device on every return.

Reverb into phaser, backwards echoes and the reversed mix

Effect: Hybrid Reverb + Phaser-Flanger + clip Reverse · Level: intermediate · Genres: On-U, African Head Charge, psychedelic dub

Quick start

Load
Hybrid Reverb, Phaser-Flanger, EQ Eight, Echo
Set
  • Return D Hybrid Reverb Dark Hall, 3.5 s, 100% wet
  • Phaser-Flanger Phaser, 6 notches, Feedback 55%, LFO 0.1 Hz, Amount 60%
  • EQ Eight HP 250 Hz, LP 7 kHz
  • Backwards echo reversed clip into an Echo return at feedback around 50%, record the return, reverse it
  • Alignment the reversed tail ends where the hit starts; 10 ms crossfade
You should hear
A hall tail that seems to rotate, and pre-echoes that swell up into each hit.
Live edition
Suite

Two On-U tricks are on record. Sherwood mentions plugging reverb into a phaser and turning a mix over or running it backwards to build a sonic picture (Documented, The FADER, 2012). He also says he recorded mixes backwards, so the effects ran in reverse, then flipped the tape, and that he was doing this around 1978–79 (Documented, The Quietus, 2011). The pre-echo that swells into a hit is the result.

  1. Return D: Hybrid Reverb fully wet into Phaser-Flanger (Phaser mode, notches 4–8, feedback 40–60%, very slow LFO). The phaser sweeps the reverb’s tail, so a static hall seems to rotate.
  2. Backwards echo: duplicate the part, Reverse the clip, send it to an Echo return with feedback around 50% and record the return (set a new audio track’s input to “Resampling” or to the return directly). Reverse the recorded audio. Each echo now arrives before its source.
  3. Line up the reversed tail so it ends exactly where the original hit starts. Crossfade the last 10 ms.
  4. Whole-mix version: Reverse the stems you are dubbing, perform the send moves on the reversed track, record the returns, reverse. It makes the throws pre-echo into the riddim, as the On-U method did on tape.

Metal as dub percussion: ring modulation, tuned resonators and echoed clangs

Effect: Shifter (Ring) + Resonators + Echo · Level: intermediate · Genres: industrial dub, Muslimgauze-style, isolationist

Quick start

Load
Drum Rack, Shifter, Resonators, EQ Eight, Echo
Set
  • Drum Rack 6–10 metal one-shots, each on its own chain
  • Shifter Ring mode, 220 Hz (or 165 or 330 Hz on E), Dry/Wet 30–50%
  • Resonators I = E2, II +7, III +12, Wet 25–40%
  • EQ Eight HP 300–400 Hz
  • Echo 1/8 dotted, FB 35%; skank pad sent at −10 dB
You should hear
Metal clangs tuned into the key, ringing in E and echoing off the beat like a skank.
Live edition
Suite

Industrial pages on this site build metal with Corpus and Collision (Industrial techno) and from recorded foley (Industrial, noise and EBM). Dub changes what you do with it: the metal is tuned into the key so its echoes sit in the harmony, and it carries the off-beat role a skank would play in reggae.

  1. Load 6–10 metal one-shots into a Drum Rack (sheet metal, pipe, spring, chain, tray). Give each pad its own chain so the processing can differ.
  2. On the skank pad: Shifter in Ring mode at a frequency near the root’s 2nd or 3rd octave (E at 165 or 330 Hz, or 220 Hz for a clang that clashes slightly), Dry/Wet 30–50%.
  3. Resonators after it: I on the root (E2), II at +7, III at +12, decay moderate, Wet 25–40%. The clang now rings in E.
  4. High-pass at 300–400 Hz. Metal below that is the kick’s and the sub’s space.
  5. Send the skank pad to the delay at −10 dB and the chain rattle at −4 dB. Leave the pipe ghosts dry: some elements must stay close so the echoes have something to be far from.

Machinery and found sound as the rhythm section

Instrument: Simpler (Slice) + Warp + Gate · Level: intermediate · Genres: Muslimgauze, Scorn, industrial dub techno

Quick start

Load
Simpler, Drum Rack, Gate, Drum Buss, EQ Eight
Set
  • Warp two markers one machine cycle apart, the cycle dragged to exactly 1 bar
  • Slices four bars consolidated, Slice by Transient, sensitivity 60%, keep 6–12 hits
  • Gate sidechain from the kick, Flip on, Hold 120 ms
  • Drum Buss Crunch 25%, Boom off
  • Hum EQ Eight notches at 50 and 100 Hz before tuning
You should hear
A machine recording turned into a drummer, locked to the grid and ducking under each kick.
Live edition
Standard and up

Where machine tape loops on the noise page are about texture, here the machine is a drummer: a printing press, a lift motor, a ventilation fan with a rattle, warped so its cycle lands on the grid at 70 or 140. Muslimgauze worked with percussion, synth, drum machine, tape and sample discs (Documented, Wikipedia); the machine-as-loop approach below is a general one, not his documented method.

  1. Find the machine’s natural cycle by ear and set two Warp markers one cycle apart. Drag the second so the cycle is exactly 1 bar, 1/2 bar or a dotted value (6 sixteenths gives a 3-against-4 drift).
  2. Consolidate four bars and Slice to a Drum Rack (Slice by Transient). Delete weak slices. Keep 6–12 hits.
  3. Reprogram the slices as percussion, or keep the warped loop and Gate it from the kick with Flip on so the loop ducks on each kick like a sidechained bass.
  4. Pitch the loudest slice to the key with the Drum Rack pad’s Transpose; machines usually hum at mains frequency (50 or 60 Hz) and its harmonics, which will clash with an E or F sub unless you shift them.
A 50 Hz mains hum sits between G0 (49 Hz) and Ab0 (51.9 Hz). If the recording hums, notch it with EQ Eight (two narrow notches at 50 and 100 Hz) before tuning the rest; a hum a quarter-tone from your sub root ruins the low end.

Saturation as glue: overdriven inputs, four-track bounces, printed returns

Effect: Saturator + Echo (no repeats) + Roar · Level: intermediate · Genres: On-U, Ekoplekz, all

Quick start

Load
Saturator, Echo, EQ Eight, Glue Compressor
Set
  • Saturator on every return Analog Clip, Drive 6 dB, Output −6 dB
  • Echo as tape transport Feedback 0%, Dry/Wet 100%, Noise 5–10%, Wobble 8–15%
  • EQ Eight HP 40 Hz, LP 12 kHz 12 dB
  • Glue Compressor 2:1, Soft Clip on
  • Four-track four audio tracks, bounce to one when full and keep going
You should hear
Echoes and reverbs that compress into the music with flutter and hiss, each tail more tape-worn than its source.
Live edition
Suite

Sherwood describes getting tape-like saturation by driving the input of a cheap EQ unit and lowering its output (Documented, The Tonearm, 2025). Ekoplekz has recorded on the same four-track cassette machine since about 2001 and says he likes its limitations (Documented, The Quietus, 2014). General tape techniques live on Tape, lo-fi and analog character; the industrial dub use is specific: saturate the returns, not just the sources, so echoes and reverbs compress into the music.

  1. Input drive: Saturator with Drive +6 to +10 dB and Output the same amount down. Analog Clip for hardness, Medium Curve for a cassette-like round-off. This is the Sherwood EQ-input move in software.
  2. Tape transport: Echo with Delay Time at its minimum, Feedback 0%, Dry/Wet 100%, Noise 5–10%, Wobble 8–15%. It adds flutter and hiss without any repeat.
  3. Put both on each return, so every echo and reverb tail passes through “tape” once more than the dry source.
  4. Four-track discipline: limit the Set to four audio tracks, bounce to one when full and keep going. Each bounce saturates and fixes the balance, as it does on a cassette portastudio (see four-track bounce).

Dread voices and cut-up speech: “news on the beat”

Instrument: Simpler (Slice) + Auto Filter + Echo · Level: intermediate · Genres: Mark Stewart, Tackhead, Gary Clail, The Bug

Quick start

Load
Simpler, EQ Eight, Pedal, Auto Filter, Echo
Set
  • Simpler speech sliced one word per pad, turned into a Drum Rack
  • EQ Eight HP 250–300 Hz, LP 3.5–4 kHz
  • Pedal Distortion, Gain 35%
  • Auto Filter BP 1.5 kHz, slow LFO (2–4 bars)
  • Echo 1/4 dotted, FB 55%, Ducking on; throw single words only
You should hear
A dread radio voice drifting in and out of focus, single words blooming into echoes after they end.
Live edition
Suite

Sherwood describes his On-U work with Mark Stewart as cut-up information: “news on the beat, as we called it” (Documented, The Quietus, 2011). Mark Fisher wrote that Stewart’s Learning to Cope with Cowardice (1983) applied dub’s dismantling of songs to cut-up and political provocation (Documented, FACT, 2012). Use your own recordings, public-domain speech or properly cleared material, never someone else’s vocal.

  1. Slice speech one word or phrase per pad. Turn the Simpler slices into a Drum Rack so each word has its own sends.
  2. Radio band: EQ Eight HP 250–300 Hz, LP 3.5–4 kHz. A little Pedal Distortion; this is a dread broadcast, not the power-electronics megaphone on the noise page.
  3. Auto Filter band-pass with a slow LFO (2–4 bars) so the voice drifts in and out of focus, like a station being tuned.
  4. Echo with Ducking on: repeats bloom only when the word ends. Throw single words, never full sentences.

Sirens made of feedback, and the hand-played effects unit

Effect: Roar (Feedback) + Auto Filter + Macros · Level: intermediate · Genres: The Bug, Techno Animal, noise dub

Quick start

Load
Roar, Auto Filter, Shifter, Limiter
Set
  • Roar Feedback routing, Feedback 80–95%, Time in Note mode on the root, Tube Preamp 12 dB
  • Auto Filter BP, Res 60%, frequency on macro X (400 Hz → 5 kHz)
  • Shifter Pitch mode, macro Y −12 → +12 st
  • Limiter ceiling −8 dB, mandatory
  • Play X and Y together; throw into the Echo return for one beat, then Kill
You should hear
An unstable, hand-played feedback squeal that swoops in pitch and prefers the key note.
Live edition
Suite

The sine siren is on Dub reggae. The industrial version is a feedback squeal played by hand. Kevin Martin has described a live rig of four Kaoss Pads, a synth, a tone generator, sirens and CD sound effects (Documented, RBMA Daily, 2014). In Live, an X/Y pair of macros over Roar’s feedback stage gives the same hands-on, unstable control.

  1. Source: a held quiet sine, or nothing at all except Roar’s own noise. Roar in Feedback routing, Feedback amount 80–95%, Time in Note mode on the root so the squeal prefers a key note.
  2. Auto Filter band-pass with high resonance after it: its frequency decides which partial screams.
  3. Shifter in Pitch mode for octave swoops. Map frequency and pitch to two macros and play them together.
  4. Limiter at −8 dB is mandatory. Throw the squeal into the Echo return for one beat, then Kill.

Slow, heavy drums at 60–90 BPM

Instrument: Drum Rack + Drum Buss · Level: essential · Genres: Scorn, isolationist, On-U slow cuts

Quick start

Load
Drum Rack, Drum Sampler, Drum Buss, Glue Compressor, EQ Eight
Set
  • Kick Drum Sampler Decay 260 ms, Punch 30%, Sub off; body at 55–65 Hz
  • Snare real snare plus a short metal hit, Decay 400 ms; send the metal to the delay
  • Drum Buss Drive 25%, Crunch 30%, Transients +20, Boom off
  • Glue Compressor 4:1, attack 10 ms, release 0.2 s, 3 dB GR
  • EQ Eight HP 40 Hz 48 dB, dip at 350 Hz
You should hear
Heavy, short, crushed drums at 70 BPM that leave room for the echoes.
Live edition
Standard and up

Harris has said Scorn’s slow, dubbed pace is what lets him get lost in the atmosphere (Documented, The Quietus, 2021), and that he moved through drum machines and samplers (an EPS, Akai, then E-mu units for their filters) to a laptop and Ableton for live work (same source). At 70 BPM every hit lasts a long time; the drums must be heavy and short, or they swamp the echoes.

  1. Kick: short (220–280 ms at 70 BPM), body at 55–65 Hz, Drum Buss Crunch for the crushed click. No Boom: the sub supplies the weight.
  2. Snare: a real snare layered with a short metal hit; the metal is the part you send to the delay.
  3. Hats rigid and busy. Swing lives in the echo returns, not the grid.
  4. Glue at 4:1 catching 3 dB, then dip 300–400 Hz where crushed kicks build boxiness.

140 half-time: dancehall weight, dubstep space, industrial grit

Instrument: Drum Rack + split sub · Level: intermediate · Genres: The Bug, modern industrial dub, dark 140

Quick start

Load
Drum Rack
Set
  • Tempo 140, felt at 70
  • Drums dancehall kick on 1 plus pushes, snare on 3 of the half-time bar
  • Sub stabs 1/4 note or shorter through the split sub, Grit at −6 dB
  • Metal hats rigid, at −16 dB; noise bursts as throws only
  • Drops first 8 bars of each drop just drums, sub and one voice
You should hear
Dancehall weight and dubstep space: a gritty sub and lots of room instead of extra layers.
Live edition
Intro and up

The Bug moved Martin’s work towards dancehall, grime and dubstep tempos (Pressure on Rephlex in 2003, London Zoo on Ninja Tune in 2008, Machine on Relapse in 2024; Documented, Wikipedia). He told XLR8R he had become more interested in moving people with low end, and described building a system around ten 18-inch woofers (Documented, XLR8R, 2006). Groove patterns below are generic; the deep-dubstep frame itself is on Deep dubstep.

  1. Tempo 140, felt at 70. Kick pattern from dancehall (on 1 plus pushes), snare on 3 of the half-time bar.
  2. Sub stabs 1/4 note or shorter, through the split sub with the Grit macro higher than in slow tracks (−6 dB).
  3. Metal hats rigid, at −16 dB; noise bursts are throws only.
  4. Leave the first 8 bars of each drop as drums, sub and one voice. The Bug’s volume comes from the sub and the space, not from adding layers (By ear).

Post-punk minimalism: long improvised takes combed for textures

Instrument: Audio tracks + Looper + Simpler · Level: advanced · Genres: Raime, post-punk dub, dark ambient dub

Quick start

Load
Pedal, Echo, Hybrid Reverb, Simpler
Set
  • Chain Pedal Overdrive low gain; Echo 1/4, FB 70%, Wobble 25%; Hybrid Reverb Springs + Dark Hall 40%
  • Record 10–20 minutes of improvisation with no plan
  • Harvest Locators on anything usable
  • Simpler Classic, loop on, Warp Texture with large grains
  • Drums sparse, clip loop of 1.5 bars against the 4/4 grid
You should hear
A few combed-out guitar swells and scrapes paired with sparse drums that slip against the bar.
Live edition
Suite

Raime described recording long stretches of guitar through effects and combing them for usable textures to pair with drum patterns, with cello and drums from guest players, and a wish to unsettle 4/4 expectations while keeping structure (Documented, The Quietus, 2012). Quarter Turns over a Living Line came out on Blackest Ever Black in 2012 (Documented, Wikipedia).

  1. Record long improvisations through effects with no plan: 10–20 minutes, arm and walk away from the mouse.
  2. Listen back once and drop Locators on anything usable: a 2-second swell, a single scrape, a feedback note.
  3. Pull each into Simpler (Classic, loop on, Warp Texture with large grains) or keep as audio clips. A track might use only three of them.
  4. Program sparse drums in an uneven loop length (clip loop of 1.5 bars, or a 24-step pattern) against a 4/4 arrangement grid.

The one-take machine dub: improvise to “tape”, no edits

Tool: Session view + Arrangement recording · Level: intermediate · Genres: Ekoplekz, cassette dub, live industrial dub

Quick start

Load
Drum Rack, Analog, Pedal, Echo, Saturator
Set
  • Drum Rack one pattern looping, every pad mute on a controller
  • Synth one held chord, one Pedal Fuzz
  • Echo Time and Feedback on knobs, changed while repeats run
  • Main Saturator Medium Curve
  • Record Resampling input, 8–15 minutes, trim start and end only
You should hear
A single improvised take with pitch-warped tape smears and no edits in between.
Live edition
Suite

Ekoplekz began from a second-hand Eko organ found in 2010, records improvised pieces straight to tape on an analogue setup, and on one release chose where each piece starts and stops but made no edits or overdubs (Documented, DMY, 2012). The Live version is a discipline, not a device: everything playable from one controller, one pass, record the main output.

  1. One Drum Rack pattern looping, every voice mutable from a pad (Drum Rack pad mute buttons mapped to a controller).
  2. One held synth or organ part, one fuzz, one Echo whose Time (not just Feedback) is on a knob. Changing delay time while repeats are running gives the pitch-warped tape smear.
  3. Arm an audio track with input Resampling and record 8–15 minutes. Trim the start and end; change nothing in between.
  4. Keep the Set at the limits of a four-track: four sound sources, one delay, one spring. More choice makes the take worse.

Industrial dub techno: the chord stab replaced by a distorted noise chord

Instrument: Analog + Roar + Echo · Level: intermediate · Genres: modern industrial dub techno, dark dub techno

Quick start

Load
Analog, Roar, Auto Filter, Echo, Hybrid Reverb
Set
  • Analog two saws, cluster chord E2 F2 B2, LP 1.2 kHz, Env decay 140 ms
  • Roar Serial, Diode Clipper 10 dB, then Tri Fold 4 dB
  • Auto Filter BP 900 Hz, LFO 2 bars
  • Echo 3/16, FB 70%, HP 400 Hz, LP 3 kHz, Noise 15%; automate Feedback 60 → 85% over 16 bars
  • Hybrid Reverb Dark Hall 25%
You should hear
A 4/4 stab-into-delay where each echo carries distorted noise rather than harmony.
Live edition
Suite

The dub techno chord-and-delay engine is on Dub techno, the kick and rumble on Industrial techno. The crossover keeps the 4/4 and the stab-into-delay idea but replaces the warm minor chord with a cluster pushed through distortion, so each echo carries noise rather than harmony.

  1. Tempo 124–132. Kick and rumble as on the industrial techno page, but leave more space above the rumble (Echo repeats need 400 Hz–3 kHz).
  2. Stab: Analog, short envelope, cluster voicing (root, b2, tritone). Roar Serial: Diode Clipper then Tri Fold.
  3. Echo at 3/16 or 1/8 dotted with high feedback and a tight band-pass; automate Feedback 60 → 85% over 16 bars.
  4. Sidechain nothing to the stab. The kick ducks the rumble; the chord sits in its own band.

The harder sound-system side: militant steppers with industrial texture

Instrument: Drum Rack + Operator + Echo · Level: intermediate · Genres: Zion Train-era UK dub, modern steppers, digital dub

Quick start

Load
Operator, Drum Rack, Drum Buss, Echo
Set
  • Operator sine + Osc B ratio 1 at −20 dB, Glide 30 ms, through the split sub at Grit −14 dB
  • Drums kick on every beat, a short metal clank instead of a rimshot, hats dense and dry
  • Drum Buss Drive 15%, Transients +10
  • Bass 8ths, little Grit
  • Horns feedback siren and metal throws
You should hear
Militant four-to-the-floor steppers with industrial texture on top and a clean bass underneath.
Live edition
Suite

Zion Train began in Oxford in 1988 as a sound system, released through its own Universal Egg label and is credited with fusing dub and dance music in the early 1990s (Documented, Wikipedia). The harder, machine-like side of UK steppers that crosses into industrial dub (four-to-the-floor, synthetic brass, sirens and noise) is described here by ear.

  1. Kick on every beat, a short metal clank instead of a rimshot, hats dense and dry.
  2. Steppers bass on 8ths through the split sub with little Grit: the industrial texture comes from the top, not the bass.
  3. Use the feedback siren and metal throws as the “horns”.

Notes & harmony

Industrial dub harmony is mostly one root, a drone and the intervals that make it uneasy: the flat 2nd, the minor 3rd, the tritone. Chords, when they appear, are clusters or open 5ths, and distortion supplies the rest. Lock clips to a scale (clip Scale mode, root E, Phrygian or Locrian) so metal resonators, Spectral Resonator and basses all agree. Full scale tables are on Deep dubstep: scales.

Interval over ENoteUse
Root / octaveESub, drone, Resonators I
Flat 2ndFSlides, the dread lean
Minor 3rdGTalking bass colour
TritoneBbCluster stabs, once per phrase in a line
5thBDrones, metal tuning (Resonators II)

Groove & programming

Arrangement template

Think in versions. The riddim section states drums, sub, metal and the talking bass with almost no effects. Each Dub section takes the same parts and arranges them with mutes and sends: drums dropped for bars at a time, the sub left alone, the Grit macro rising. The Voice section is a handful of words. The Collapse removes everything but the machine loop and lets the feedback matrix bloom; it is the industrial answer to a breakdown. Riddim 2 returns harder (more Grit, the talking bass up), Dub 2 strips to sub only, and the Decay leaves the machine and the last tail. Slow tempo means fewer bars: 96 bars at 72 BPM is longer than 160 bars of 140.

Mix & master targets

Signature rack

Sub-styles

Sub-styleTempoWhat defines itLive 12 focus
On-U / post-punk dub65–110Played funk or reggae rhythm sections, cut-up voices, studio as instrument, reversed effectsDesk performance, reverb into phaser, reversed returns, played parts unquantised
Tackhead-style industrial funk95–115Funk bass and drums with sampled stabs and noise, hard editsSimpler slices, Beat Repeat, Drum Buss crunch on a live kit
Psychedelic percussion dub (African Head Charge)70–100Hand percussion, chants, spectral effects; described as psychedelic dub (Documented, Wikipedia)Percussion through feedback matrix, reversed echoes, wide returns
Isolationist / Scorn60–90Very slow, very deep bass, space, distortion on the bass, minimal elementsSplit sub, talking bass, slow drums, sub-only sections
Techno Animal / Ice80–95Industrial hip-hop: broken beats, huge distorted low end, noiseHip-hop back-beat, Roar Serial on bass, feedback matrix
The Bug / dancehall-industrial140 (70)Dancehall kick and sub stabs, distortion, sound-system volume140 half-time pattern, Grit macro high, hand siren
Muslimgauze-style percussion dub80–130Percussion loops, tape, sampled sources, relentless repetitionMachinery groove, metal skank, Echo on loops
Hard UK steppers72–80 (or 150)Four-to-the-floor, synthetic horns, sirens, sound-system weightSteppers pattern, split sub, feedback siren
Raime-style post-punk minimalism70–90Sparse drums, guitar and cello textures, unsettled metreLong takes combed for textures, uneven loop lengths
Cassette machine dub (Ekoplekz)freeImprovised one-take, cheap machines, tape saturationOne-take recording, Echo Time ridden by hand
Industrial dub techno124–1324/4, rumble, distorted cluster stabs into long delaysNoise chord, Roar Serial, Echo band-passed repeats

Common mistakes

Related